Bluetooth, BIOS

Fórum: 

Sziasztok!

 

Ne haragudjatok, ha valahol már van válasz a problémámra, próbáltam keresni. Van egy MSI PS42 Modern 8RA laptopom, amin Linux Mintet futtatok. Régóta használok Mintet, eddig nem volt vele gondom, valószínű, hogy nem is az okozza. A probléma, hogy a Bluetooth minden bekapcsolást követően rövid használat után következetlennek tűnő módon leáll. Csak akkor tudom újra működésre bírni, ha a biost visszaállítom alapértelemezettre, és akkor megint pár perc múlva eltűnik a Bluetooth. A rendszer ettől kezdve úgy érzékeli, mintha nem lenne hardware hozzá. Amikor megvettem a gépet, emlékeim szerint volt a BIOS-ban egy menű, ahol az egyes hardware-eket ki-be lehetett kapcsolni (kamera, mikrofon, bluetooth...), de most egyszerűen hiányzik a menü. Alaplap? BIOS-t kellene frissíteni? Előre is köszönöm a válaszokat!

 

Üdv.: Martin

Laptop?

Nem az a gondod mint itt par hete, bar ott egyaltalan nem lehetett mukodesre birni a blutuszt, nincs a gepeden egy eldugott kis mechanikus kapcsolo, vagy egyedi bill. kombinacio a bt-hoz?

Értékelés: 

0
Még nincs értékelve

Laptop?

#1 Nem tudok róla, hogy lenne. Filmnézés közben, miközben nem nyúlok hozzá, egyszerűen leáll. Kb egy éves laptop, nem régóta használom a bluetooth-t rendszeresen, de korábban nem volt gond. Illetve ami zavar, hogy emlékeim szerint volt a BIOS-ban lehetőség az egyes hardware-ek kikapcsolására, de most nincs.

Értékelés: 

0
Még nincs értékelve

Laptop?

#2
Akkor várd meg a profikt akik dmesg és egyéb kimenetekből nálam sokkal okosabb válaszokat adnak neked.
Én még erősen zöldfülű vagyok.

Értékelés: 

0
Még nincs értékelve

Skoda

Javaslom, hogy ha az autódhoz alkatrészt veszel, ne csak annyit mondj róla, hogy Skoda, hanem mondjuk azt, hogy Skoda 1000MB.
https://en.wikipedia.org/wiki/%C5%A0koda_1000_MB#/media/File:13-04-05-Sk...

Azt is megírhattad volna, hogy miféle kapcsolatról van szó: hang-, vagy fájlátvitelről.
Ez ugyan már következetlennek tűnő módon kiderült a hozzászólásodból, de előbb is megírhattad volna.

Esetleg azt is, hogy friss telepítésű a Mint, vagy eddig jó volt, de most elromlott a Bluetooth?

Próbáld meg ezt terminálban:

sudo apt install pulseaudio-module-bluetooth
pulseaudio -k ; pulseaudio -D

Értékelés: 

0
Még nincs értékelve

Skoda

#4 Nem ez a baja  neki. Eltunik a  BT adapter mintha kihuzta  volna.

Rootkiskacsa, Elotte, utana kene egy terminal 

lsusb 

  kimenet, ide pasztazd be, az nem hosszu.  Nincs valami BT energia  ellatasi problema,  nekem KDE  van es abba van gui opcio hogy soha  ne kapcsoljon ki, akkor se ha napokig nincs csatlakoztatva  bt eszkoz.  Viszont a kolleganak igaza van, kene tudni hogy milyen DE van neked.

Jo a nickneved smiley

Értékelés: 

0
Még nincs értékelve

Skoda

#4 Görcsöt kap a kezed, ha használod a válasz gombot?

Értékelés: 

0
Még nincs értékelve

BIOS

Vannak titkos billentyűkombinációk MSI-nél, ami megjeleníti a rejtett opciókat, pl. jobb shift jobb ctrl bal alt és F2, de ez modellenként változik. Ennél a kérdéses gépnél nem sikerült konkrét infót találnom. Esetleg még a fenti gombokhoz az Fn-t is le kell nyomni. Meg ha van az Advances alatt Bios Guard, és alatta BIOS TOOLS, azt engedélyezni kell. Vagy nem tudom.

Dmesg volt nézve? Vannak benne piros sorok?

Értékelés: 

0
Még nincs értékelve

Skoda

#6 Csak akkor használom a válasz gombot, amikor válaszolok.
Te amúgy mihez szóltál hozzá?
És minek?

Értékelés: 

0
Még nincs értékelve

Először is nagyon köszönöm a

Először is nagyon köszönöm a hozzászólásokat, különösen a nem lekezelőket. Fórumot még soha nem használtam, linux terén is elég bézik júzer vagyok. Sokszor volt már problémám, de mindig megtaláltam valamilyen fórumon a megoldást, és simán leutánoztam, akkor is, ha nem értettem, mit csinálok.

A bluetooth bekapcsolást követően random idő után minden alkalommal egyszerűen eltűnik, mintha hiányozna a hardware. Mindegy milyen adatforgalomról van szó. Billentyűkombinációkat én is kerestem, de nem találtam. A legújabb linux mint cinnamont használom jelenleg. Újra van telepítve, de korábbi verziónál is ugyanezt a hibát produkálta. BIOS frissítést is megkockáztattam, a hiba maradt. A BIOS-ból teljesen hiányoznak a bluetooth és egyéb eszközökre vonatkozó beállítások (pl kamera), de ha újraindítom a gépet, majd a BIOS-t visszaállítom alapértelmezettre, akkor újra felismeri az operációs rendszer a bluetooth-t, ami ugye random idő elteltével következetesen eltűnik.

martin@martin-PS42-Modern-8RA:~$ pulseaudio -k ; pulseaudio -D
E: [pulseaudio] main.c: A démon elindítása nem sikerült.

A dmesg kimenet tele van pirossal, belinkelem a bejegyzés végére, illetve az lsusb kimenetet összeomlás előtt és után.

 

ÖSSZEOMLÁS ELŐTT:
martin@martin-PS42-Modern-8RA:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 5986:211b Acer, Inc HD Webcam
Bus 001 Device 003: ID 06cb:009b Synaptics, Inc.
Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 005: ID 8087:0aaa Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ÖSSZEOMLÁS UTÁN:
martin@martin-PS42-Modern-8RA:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 5986:211b Acer, Inc HD Webcam
Bus 001 Device 003: ID 06cb:009b Synaptics, Inc.
Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

martin@martin-PS42-Modern-8RA:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xde, date = 2020-06-03
[    0.000000] Linux version 5.4.0-58-generic (buildd@lcy01-amd64-004) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 (Ubuntu 5.4.0-58.64-generic 5.4.73)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=6e1557f9-65f0-4f22-92d5-e305e85a954b ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000782a1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000782a2000-0x0000000079390fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079391000-0x0000000079515fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079516000-0x0000000079937fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079938000-0x000000007ac0dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ac0e000-0x000000007ac0efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ac0f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x70541018-0x70551057] usable ==> usable
[    0.000000] e820: update [mem 0x70541018-0x70551057] usable ==> usable
[    0.000000] e820: update [mem 0x70514018-0x70540857] usable ==> usable
[    0.000000] e820: update [mem 0x70514018-0x70540857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000070514017] usable
[    0.000000] reserve setup_data: [mem 0x0000000070514018-0x0000000070540857] usable
[    0.000000] reserve setup_data: [mem 0x0000000070540858-0x0000000070541017] usable
[    0.000000] reserve setup_data: [mem 0x0000000070541018-0x0000000070551057] usable
[    0.000000] reserve setup_data: [mem 0x0000000070551058-0x00000000782a1fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000782a2000-0x0000000079390fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000079391000-0x0000000079515fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000079516000-0x0000000079937fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000079938000-0x000000007ac0dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ac0e000-0x000000007ac0efff] usable
[    0.000000] reserve setup_data: [mem 0x000000007ac0f000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027dffffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x7985c000  ACPI=0x7985c000  TPMFinalLog=0x798c2000  SMBIOS=0x7a9bc000  SMBIOS 3.0=0x7a9bb000  MEMATTR=0x747ce418  MPS=0xfcb20  ESRT=0x747e9f98  TPMEventLog=0x71ee7018
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. PS42 Modern 8RA/MS-14B3, BIOS E14B3IMS.105 05/21/2019
[    0.000000] tsc: Detected 2000.000 MHz processor
[    0.002846] tsc: Detected 1999.968 MHz TSC
[    0.002846] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002849] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002858] last_pfn = 0x27e000 max_arch_pfn = 0x400000000
[    0.002863] MTRR default type: write-back
[    0.002864] MTRR fixed ranges enabled:
[    0.002866]   00000-9FFFF write-back
[    0.002867]   A0000-BFFFF uncachable
[    0.002868]   C0000-FFFFF write-protect
[    0.002869] MTRR variable ranges enabled:
[    0.002871]   0 base 0080000000 mask 7F80000000 uncachable
[    0.002873]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.002874]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.002875]   3 base 2000000000 mask 6000000000 uncachable
[    0.002876]   4 base 1000000000 mask 7000000000 uncachable
[    0.002877]   5 base 0800000000 mask 7800000000 uncachable
[    0.002878]   6 base 0400000000 mask 7C00000000 uncachable
[    0.002879]   7 base 4000000000 mask 4000000000 uncachable
[    0.002880]   8 disabled
[    0.002881]   9 disabled
[    0.003548] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003814] last_pfn = 0x7ac0f max_arch_pfn = 0x400000000
[    0.015374] found SMP MP-table at [mem 0x000fcd60-0x000fcd6f]
[    0.015392] esrt: Reserving ESRT space from 0x00000000747e9f98 to 0x00000000747e9fd0.
[    0.015398] e820: update [mem 0x747e9000-0x747e9fff] usable ==> reserved
[    0.015420] check: Scanning 1 areas for low memory corruption
[    0.015425] Using GB pages for direct mapping
[    0.016029] secureboot: Secure boot disabled
[    0.016030] RAMDISK: [mem 0x3ae1e000-0x3fffdfff]
[    0.016045] ACPI: Early table checksum verification disabled
[    0.016049] ACPI: RSDP 0x000000007985C000 000024 (v02 MSI_NB)
[    0.016053] ACPI: XSDT 0x000000007985C0B0 0000E4 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016060] ACPI: FACP 0x00000000798984B0 000114 (v06 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016066] ACPI: DSDT 0x000000007985C230 03C27F (v02 MSI_NB MEGABOOK 01072009 INTL 20160527)
[    0.016070] ACPI: FACS 0x0000000079937080 000040
[    0.016073] ACPI: APIC 0x00000000798985C8 0000BC (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016077] ACPI: FPDT 0x0000000079898688 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016080] ACPI: FIDT 0x00000000798986D0 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016085] ACPI: MCFG 0x0000000079898770 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.016090] ACPI: SSDT 0x00000000798987B0 000378 (v01 SataRe SataTabl 00001000 INTL 20160527)
[    0.016094] ACPI: SSDT 0x0000000079898B28 0017C6 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.016098] ACPI: SLIC 0x000000007989A2F0 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016101] ACPI: SSDT 0x000000007989A468 0031C6 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.016105] ACPI: HPET 0x000000007989D630 000038 (v01 MSI_NB MEGABOOK 00000002      01000013)
[    0.016109] ACPI: SSDT 0x000000007989D668 002900 (v02 INTEL  xh_whld4 00000000 INTL 20160527)
[    0.016112] ACPI: UEFI 0x000000007989FF68 000048 (v01 MSI_NB MEGABOOK 00000002      01000013)
[    0.016115] ACPI: LPIT 0x000000007989FFB0 00005C (v01 MSI_NB MEGABOOK 00000002      01000013)
[    0.016119] ACPI: SSDT 0x00000000798A0010 0027DE (v02 MSI_NB PtidDevc 00001000 INTL 20160527)
[    0.016122] ACPI: SSDT 0x00000000798A27F0 0014E2 (v02 MSI_NB TbtTypeC 00000000 INTL 20160527)
[    0.016126] ACPI: DBGP 0x00000000798A3CD8 000034 (v01 MSI_NB MEGABOOK 00000002      01000013)
[    0.016129] ACPI: DBG2 0x00000000798A3D10 000054 (v00 MSI_NB MEGABOOK 00000002      01000013)
[    0.016132] ACPI: SSDT 0x00000000798A3D68 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.016136] ACPI: SSDT 0x00000000798A3EB0 000487 (v02 SgRef  SgRpSsdt 00001000 INTL 20160527)
[    0.016139] ACPI: DMAR 0x00000000798A4338 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.016142] ACPI: BGRT 0x00000000798A43E0 000038 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016146] ACPI: TPM2 0x00000000798A4418 000034 (v04 MSI_NB MEGABOOK 00000001 AMI  00000000)
[    0.016149] ACPI: SSDT 0x00000000798A4450 001F90 (v01 OptRef OptTabl  00001000 INTL 20160527)
[    0.016152] ACPI: WSMT 0x00000000798A63E0 000028 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.016167] ACPI: Local APIC address 0xfee00000
[    0.016382] No NUMA configuration found
[    0.016384] Faking a node at [mem 0x0000000000000000-0x000000027dffffff]
[    0.016395] NODE_DATA(0) allocated [mem 0x27dfd5000-0x27dffffff]
[    0.016682] Zone ranges:
[    0.016683]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.016684]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.016685]   Normal   [mem 0x0000000100000000-0x000000027dffffff]
[    0.016686]   Device   empty
[    0.016687] Movable zone start for each node
[    0.016692] Early memory node ranges
[    0.016693]   node   0: [mem 0x0000000000001000-0x000000000005efff]
[    0.016694]   node   0: [mem 0x0000000000060000-0x000000000009ffff]
[    0.016695]   node   0: [mem 0x0000000000100000-0x00000000782a1fff]
[    0.016696]   node   0: [mem 0x0000000079391000-0x0000000079515fff]
[    0.016697]   node   0: [mem 0x000000007ac0e000-0x000000007ac0efff]
[    0.016697]   node   0: [mem 0x0000000100000000-0x000000027dffffff]
[    0.017092] Zeroed struct page in unavailable ranges: 39994 pages
[    0.017094] Initmem setup node 0 [mem 0x0000000000001000-0x000000027dffffff]
[    0.017096] On node 0 totalpages: 2057158
[    0.017097]   DMA zone: 64 pages used for memmap
[    0.017098]   DMA zone: 24 pages reserved
[    0.017099]   DMA zone: 3998 pages, LIFO batch:0
[    0.017153]   DMA32 zone: 7633 pages used for memmap
[    0.017154]   DMA32 zone: 488488 pages, LIFO batch:63
[    0.027816]   Normal zone: 24448 pages used for memmap
[    0.027817]   Normal zone: 1564672 pages, LIFO batch:63
[    0.051109] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.051333] ACPI: PM-Timer IO Port: 0x1808
[    0.051335] ACPI: Local APIC address 0xfee00000
[    0.051343] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.051344] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.051345] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.051346] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.051347] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.051347] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.051348] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.051349] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.051397] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.051399] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.051401] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.051402] ACPI: IRQ0 used by override.
[    0.051404] ACPI: IRQ9 used by override.
[    0.051406] Using ACPI (MADT) for SMP configuration information
[    0.051408] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.051416] e820: update [mem 0x74608000-0x746fbfff] usable ==> reserved
[    0.051427] TSC deadline timer available
[    0.051428] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.051451] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.051453] PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[    0.051455] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.051457] PM: Registered nosave memory: [mem 0x70514000-0x70514fff]
[    0.051458] PM: Registered nosave memory: [mem 0x70540000-0x70540fff]
[    0.051459] PM: Registered nosave memory: [mem 0x70541000-0x70541fff]
[    0.051461] PM: Registered nosave memory: [mem 0x70551000-0x70551fff]
[    0.051463] PM: Registered nosave memory: [mem 0x74608000-0x746fbfff]
[    0.051465] PM: Registered nosave memory: [mem 0x747e9000-0x747e9fff]
[    0.051467] PM: Registered nosave memory: [mem 0x782a2000-0x79390fff]
[    0.051469] PM: Registered nosave memory: [mem 0x79516000-0x79937fff]
[    0.051470] PM: Registered nosave memory: [mem 0x79938000-0x7ac0dfff]
[    0.051472] PM: Registered nosave memory: [mem 0x7ac0f000-0x7fffffff]
[    0.051473] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.051473] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.051474] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.051475] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.051476] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.051476] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.051477] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.051478] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.051478] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.051479] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.051480] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.051480] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.051482] [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.051483] Booting paravirtualized kernel on bare hardware
[    0.051487] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.051494] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.051839] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.051848] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.051849] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.051886] Built 1 zonelists, mobility grouping on.  Total pages: 2024989
[    0.051887] Policy zone: Normal
[    0.051888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=6e1557f9-65f0-4f22-92d5-e305e85a954b ro quiet splash
[    0.052829] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.053248] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.053350] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.060520] Calgary: detecting Calgary via BIOS EBDA area
[    0.060522] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.096790] Memory: 7818892K/8228632K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 409740K reserved, 0K cma-reserved)
[    0.096799] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.097009] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.097032] ftrace: allocating 44541 entries in 174 pages
[    0.122737] rcu: Hierarchical RCU implementation.
[    0.122739] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.122740]     Tasks RCU enabled.
[    0.122741] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.122741] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.126962] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.127789] random: crng done (trusting CPU's manufacturer)
[    0.127825] Console: colour dummy device 80x25
[    0.127830] printk: console [tty0] enabled
[    0.127859] ACPI: Core revision 20190816
[    0.128439] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.128576] APIC: Switch to symmetric I/O mode setup
[    0.128579] DMAR: Host address width 39
[    0.128580] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.128588] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.128589] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.128594] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.128595] DMAR: RMRR base: 0x00000079d4c000 end: 0x00000079f95fff
[    0.128596] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.128598] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.128599] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.128600] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.130995] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.130996] x2apic enabled
[    0.131027] Switched APIC routing to cluster x2apic.
[    0.136736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.156415] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns
[    0.156421] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872)
[    0.156423] pid_max: default: 32768 minimum: 301
[    0.160486] LSM: Security Framework initializing
[    0.160500] Yama: becoming mindful.
[    0.160561] AppArmor: AppArmor initialized
[    0.160629] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.160676] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.160700] *** VALIDATE tmpfs ***
[    0.160896] *** VALIDATE proc ***
[    0.160961] *** VALIDATE cgroup1 ***
[    0.160962] *** VALIDATE cgroup2 ***
[    0.161060] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.161092] process: using mwait in idle threads
[    0.161095] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.161096] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.161099] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.161101] Spectre V2 : Mitigation: Full generic retpoline
[    0.161102] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.161102] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.161104] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.161104] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.161106] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.161114] SRBDS: Mitigation: Microcode
[    0.161115] MDS: Mitigation: Clear CPU buffers
[    0.161465] Freeing SMP alternatives memory: 40K
[    0.164538] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xb)
[    0.164735] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.164742] ... version:                4
[    0.164743] ... bit width:              48
[    0.164743] ... generic registers:      4
[    0.164744] ... value mask:             0000ffffffffffff
[    0.164745] ... max period:             00007fffffffffff
[    0.164745] ... fixed-purpose events:   3
[    0.164746] ... event mask:             000000070000000f
[    0.164796] rcu: Hierarchical SRCU implementation.
[    0.166045] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.166149] smp: Bringing up secondary CPUs ...
[    0.166261] x86: Booting SMP configuration:
[    0.166262] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.177470] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.177470]  #5 #6 #7
[    0.181248] smp: Brought up 1 node, 8 CPUs
[    0.181248] smpboot: Max logical packages: 1
[    0.181248] smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
[    0.184795] devtmpfs: initialized
[    0.184795] x86/mm: Memory block size: 128MB
[    0.185453] PM: Registering ACPI NVS region [mem 0x79516000-0x79937fff] (4333568 bytes)
[    0.185453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.185453] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.185453] pinctrl core: initialized pinctrl subsystem
[    0.185453] PM: RTC time: 16:54:33, date: 2021-05-11
[    0.185453] NET: Registered protocol family 16
[    0.185453] audit: initializing netlink subsys (disabled)
[    0.185453] audit: type=2000 audit(1620752073.052:1): state=initialized audit_enabled=0 res=1
[    0.185453] EISA bus registered
[    0.185453] cpuidle: using governor ladder
[    0.185453] cpuidle: using governor menu
[    0.185453] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.185453] ACPI: bus type PCI registered
[    0.185453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.185453] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.185453] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.185453] PCI: Using configuration type 1 for base access
[    0.185453] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.189686] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.189686] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.189686] ACPI: Added _OSI(Module Device)
[    0.189686] ACPI: Added _OSI(Processor Device)
[    0.189686] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.189686] ACPI: Added _OSI(Processor Aggregator Device)
[    0.189686] ACPI: Added _OSI(Linux-Dell-Video)
[    0.189686] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.189686] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.301039] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.313868] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.315432] ACPI: Dynamic OEM Table Load:
[    0.315440] ACPI: SSDT 0xFFFF9D4173EFB400 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.318002] ACPI: Dynamic OEM Table Load:
[    0.318009] ACPI: SSDT 0xFFFF9D41743A1000 00060E (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.321483] ACPI: Dynamic OEM Table Load:
[    0.321492] ACPI: SSDT 0xFFFF9D4173C0B000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.325446] ACPI: Dynamic OEM Table Load:
[    0.325452] ACPI: SSDT 0xFFFF9D4173EF8000 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.332556] ACPI: EC: EC started
[    0.332557] ACPI: EC: interrupt blocked
[    0.338052] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.338055] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.338056] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.338057] ACPI: Interpreter enabled
[    0.338121] ACPI: (supports S0 S3 S4 S5)
[    0.338122] ACPI: Using IOAPIC for interrupt routing
[    0.338182] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.339108] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.347910] ACPI: Power Resource [PC05] (on)
[    0.361929] ACPI: Power Resource [USBC] (on)
[    0.367799] ACPI: Power Resource [V0PR] (on)
[    0.368557] ACPI: Power Resource [V1PR] (on)
[    0.369300] ACPI: Power Resource [V2PR] (on)
[    0.379520] ACPI: Power Resource [WRST] (on)
[    0.383873] ACPI: Power Resource [PIN] (off)
[    0.384707] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.384716] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.387941] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.387942] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.389349] PCI host bridge to bus 0000:00
[    0.389351] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.389353] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.389355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.389356] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.389357] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.389359] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.389373] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[    0.389585] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[    0.389601] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[    0.389609] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.389615] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.389638] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.389929] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[    0.389958] pci 0000:00:12.0: reg 0x10: [mem 0xa431d000-0xa431dfff 64bit]
[    0.390226] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[    0.390249] pci 0000:00:14.0: reg 0x10: [mem 0xa4300000-0xa430ffff 64bit]
[    0.390325] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.391022] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[    0.391046] pci 0000:00:14.2: reg 0x10: [mem 0xa4318000-0xa4319fff 64bit]
[    0.391058] pci 0000:00:14.2: reg 0x18: [mem 0xa431c000-0xa431cfff 64bit]
[    0.391328] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000
[    0.391464] pci 0000:00:14.3: reg 0x10: [mem 0xa4314000-0xa4317fff 64bit]
[    0.392018] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.392286] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[    0.392316] pci 0000:00:16.0: reg 0x10: [mem 0xa431b000-0xa431bfff 64bit]
[    0.392405] pci 0000:00:16.0: PME# supported from D3hot
[    0.392746] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
[    0.392851] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.392869] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.393203] pci 0000:00:1d.4: [8086:9db4] type 01 class 0x060400
[    0.393311] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.393330] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.393666] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[    0.394145] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040300
[    0.394212] pci 0000:00:1f.3: reg 0x10: [mem 0xa4310000-0xa4313fff 64bit]
[    0.394275] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
[    0.394408] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.395610] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[    0.395641] pci 0000:00:1f.4: reg 0x10: [mem 0xa431a000-0xa431a0ff 64bit]
[    0.395674] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.395961] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[    0.395980] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.396267] pci 0000:01:00.0: [10de:1d13] type 00 class 0x030200
[    0.396294] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[    0.396308] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.396322] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.396331] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.396341] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
[    0.396363] pci 0000:01:00.0: Enabling HDA controller
[    0.396625] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.396629] pci 0000:00:1d.0:   bridge window [io  0x4000-0x4fff]
[    0.396632] pci 0000:00:1d.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.396637] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.396752] pci 0000:02:00.0: [2646:5008] type 00 class 0x010802
[    0.396787] pci 0000:02:00.0: reg 0x10: [mem 0xa4200000-0xa4203fff 64bit]
[    0.396797] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x3007]
[    0.408455] pci 0000:00:1d.4: PCI bridge to [bus 02]
[    0.408458] pci 0000:00:1d.4:   bridge window [io  0x3000-0x3fff]
[    0.408461] pci 0000:00:1d.4:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.411303] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.411453] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.411599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.411745] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.411891] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.412037] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.412185] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.412330] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.413834] ACPI: EC: interrupt unblocked
[    0.413835] ACPI: EC: event unblocked
[    0.413854] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.413855] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[    0.413966] iommu: Default domain type: Translated
[    0.413966] SCSI subsystem initialized
[    0.413966] libata version 3.00 loaded.
[    0.413966] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.413966] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.413966] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.413966] vgaarb: loaded
[    0.413966] ACPI: bus type USB registered
[    0.413966] usbcore: registered new interface driver usbfs
[    0.413966] usbcore: registered new interface driver hub
[    0.413966] usbcore: registered new device driver usb
[    0.413966] pps_core: LinuxPPS API ver. 1 registered
[    0.413966] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.413966] PTP clock support registered
[    0.413966] EDAC MC: Ver: 3.0.0
[    0.413966] Registered efivars operations
[    0.413966] PCI: Using ACPI for IRQ routing
[    0.458786] PCI: pci_cache_line_size set to 64 bytes
[    0.458888] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[    0.458890] e820: reserve RAM buffer [mem 0x70514018-0x73ffffff]
[    0.458891] e820: reserve RAM buffer [mem 0x70541018-0x73ffffff]
[    0.458892] e820: reserve RAM buffer [mem 0x74608000-0x77ffffff]
[    0.458893] e820: reserve RAM buffer [mem 0x747e9000-0x77ffffff]
[    0.458894] e820: reserve RAM buffer [mem 0x782a2000-0x7bffffff]
[    0.458895] e820: reserve RAM buffer [mem 0x79516000-0x7bffffff]
[    0.458896] e820: reserve RAM buffer [mem 0x7ac0f000-0x7bffffff]
[    0.458897] e820: reserve RAM buffer [mem 0x27e000000-0x27fffffff]
[    0.459022] NetLabel: Initializing
[    0.459022] NetLabel:  domain hash size = 128
[    0.459023] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.459043] NetLabel:  unlabeled traffic allowed by default
[    0.459059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.459059] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.462477] clocksource: Switched to clocksource tsc-early
[    0.475448] *** VALIDATE bpf ***
[    0.475556] VFS: Disk quotas dquot_6.6.0
[    0.475579] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.475611] *** VALIDATE ramfs ***
[    0.475615] *** VALIDATE hugetlbfs ***
[    0.475713] AppArmor: AppArmor Filesystem Enabled
[    0.475750] pnp: PnP ACPI init
[    0.476103] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.476159] pnp 00:01: Plug and Play ACPI device, IDs SYN150e SYN1500 SYN0002 PNP0f13 (active)
[    0.476329] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.476331] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.476336] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.476551] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.476555] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.477130] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.477132] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.477134] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.477135] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.477137] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.477139] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.477140] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.477142] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.477146] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.477520] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.477522] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.477523] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.477525] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.477527] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.477528] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.477530] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.477534] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478038] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.478042] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.479916] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481234] pnp: PnP ACPI: found 8 devices
[    0.482766] thermal_sys: Registered thermal governor 'fair_share'
[    0.482767] thermal_sys: Registered thermal governor 'bang_bang'
[    0.482768] thermal_sys: Registered thermal governor 'step_wise'
[    0.482769] thermal_sys: Registered thermal governor 'user_space'
[    0.482770] thermal_sys: Registered thermal governor 'power_allocator'
[    0.487283] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.487331] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.487340] pci 0000:00:1d.0:   bridge window [io  0x4000-0x4fff]
[    0.487350] pci 0000:00:1d.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.487354] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.487359] pci 0000:00:1d.4: PCI bridge to [bus 02]
[    0.487361] pci 0000:00:1d.4:   bridge window [io  0x3000-0x3fff]
[    0.487365] pci 0000:00:1d.4:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.487373] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.487374] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.487376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.487377] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.487378] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.487380] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.487381] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[    0.487382] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.487384] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.487385] pci_bus 0000:02: resource 1 [mem 0xa4200000-0xa42fffff]
[    0.487647] NET: Registered protocol family 2
[    0.487874] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.487934] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.488110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.488211] TCP: Hash tables configured (established 65536 bind 65536)
[    0.488279] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.488310] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.488369] NET: Registered protocol family 1
[    0.488374] NET: Registered protocol family 44
[    0.488387] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.488862] PCI: CLS 64 bytes, default 64
[    0.488912] Trying to unpack rootfs image as initramfs...
[    0.748719] Initramfs unpacking failed: Decoding failed
[    0.748729] fbcon: Taking over console
[    0.760612] Freeing initrd memory: 83840K
[    0.760692] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.760694] software IO TLB: mapped [mem 0x6c514000-0x70514000] (64MB)
[    0.761002] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.761103] check: Scanning for low memory corruption every 60 seconds
[    0.761707] Initialise system trusted keyrings
[    0.761729] Key type blacklist registered
[    0.761769] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.763391] zbud: loaded
[    0.763856] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.764033] fuse: init (API version 7.31)
[    0.764054] *** VALIDATE fuse ***
[    0.764059] *** VALIDATE fuse ***
[    0.764184] Platform Keyring initialized
[    0.769090] Key type asymmetric registered
[    0.769092] Asymmetric key parser 'x509' registered
[    0.769100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.769149] io scheduler mq-deadline registered
[    0.769655] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.769716] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[    0.769760] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.770072] pcieport 0000:00:1d.4: PME: Signaling with IRQ 123
[    0.770125] pcieport 0000:00:1d.4: AER: enabled with IRQ 123
[    0.770173] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.770257] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.770332] efifb: probing for efifb
[    0.770350] efifb: showing boot graphics
[    0.772298] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[    0.772299] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.772300] efifb: scrolling: redraw
[    0.772301] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.772397] Console: switching to colour frame buffer device 240x67
[    0.777410] fb0: EFI VGA frame buffer device
[    0.777420] intel_idle: MWAIT substates: 0x11142120
[    0.777421] intel_idle: v0.4.1 model 0x8E
[    0.777971] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.778557] ACPI: AC Adapter [ADP1] (on-line)
[    0.778653] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:49/PNP0C09:00/PNP0C0D:00/input/input0
[    0.778689] ACPI: Lid Switch [LID0]
[    0.778754] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.778772] ACPI: Sleep Button [SLPB]
[    0.778806] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.778822] ACPI: Power Button [PWRB]
[    0.778855] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.778886] ACPI: Power Button [PWRF]
[    0.781041] thermal LNXTHERM:00: registered as thermal_zone0
[    0.781043] ACPI: Thermal Zone [THRM] (59 C)
[    0.781325] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.783959] Linux agpgart interface v0.103
[    0.848625] loop: module loaded
[    0.848948] libphy: Fixed MDIO Bus: probed
[    0.848950] tun: Universal TUN/TAP device driver, 1.6
[    0.849023] PPP generic driver version 2.4.2
[    0.849180] VFIO - User Level meta-driver version: 0.3
[    0.849331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.849335] ehci-pci: EHCI PCI platform driver
[    0.849346] ehci-platform: EHCI generic platform driver
[    0.849361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.849363] ohci-pci: OHCI PCI platform driver
[    0.849371] ohci-platform: OHCI generic platform driver
[    0.849380] uhci_hcd: USB Universal Host Controller Interface driver
[    0.849681] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.849687] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.850773] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.850778] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.850988] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.850990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850992] usb usb1: Product: xHCI Host Controller
[    0.850993] usb usb1: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.850994] usb usb1: SerialNumber: 0000:00:14.0
[    0.851162] hub 1-0:1.0: USB hub found
[    0.851180] hub 1-0:1.0: 12 ports detected
[    0.853343] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.853347] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.853350] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.853401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.853403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.853404] usb usb2: Product: xHCI Host Controller
[    0.853405] usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.853407] usb usb2: SerialNumber: 0000:00:14.0
[    0.853559] hub 2-0:1.0: USB hub found
[    0.853572] hub 2-0:1.0: 6 ports detected
[    0.853981] usb: port power management may be unreliable
[    0.854833] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.859354] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.859358] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.859579] mousedev: PS/2 mouse device common for all mice
[    0.860066] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.860893] rtc_cmos rtc_cmos: registered as rtc0
[    0.860909] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.860916] i2c /dev entries driver
[    0.860965] device-mapper: uevent: version 1.0.3
[    0.861030] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    0.861051] platform eisa.0: Probing EISA bus 0
[    0.861053] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.861054] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.861056] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.861057] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.861058] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.861059] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.861060] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.861061] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.861062] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.861064] platform eisa.0: EISA: Detected 0 cards
[    0.861067] intel_pstate: Intel P-state driver initializing
[    0.861559] intel_pstate: HWP enabled
[    0.861955] ledtrig-cpu: registered to indicate activity on CPUs
[    0.861956] EFI Variables Facility v0.08 2004-May-17
[    0.870882] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.880301] intel_pmc_core INT33A1:00:  initialized
[    0.880363] drop_monitor: Initializing network drop monitor service
[    0.880463] NET: Registered protocol family 10
[    0.883901] Segment Routing with IPv6
[    0.883916] NET: Registered protocol family 17
[    0.883937] Key type dns_resolver registered
[    0.884207] RAS: Correctable Errors collector initialized.
[    0.884225] microcode: sig=0x806eb, pf=0x80, revision=0xde
[    0.884257] microcode: Microcode Update Driver: v2.2.
[    0.884260] IPI shorthand broadcast: enabled
[    0.884265] sched_clock: Marking stable (879252945, 5002246)->(889113170, -4857979)
[    0.884307] registered taskstats version 1
[    0.884316] Loading compiled-in X.509 certificates
[    0.884766] Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
[    0.884812] zswap: loaded using pool lzo/zbud
[    0.884874] Key type ._fscrypt registered
[    0.884875] Key type .fscrypt registered
[    0.887784] Key type big_key registered
[    0.887786] Key type trusted registered
[    0.889341] Key type encrypted registered
[    0.889343] AppArmor: AppArmor sha1 policy hashing enabled
[    0.890008] integrity: Loading X.509 certificate: UEFI:db
[    0.890045] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.890045] integrity: Loading X.509 certificate: UEFI:db
[    0.890058] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.890499] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.890509] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    0.890510] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.890769] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.891554] ima: Allocated hash algorithm: sha1
[    0.896572] battery: ACPI: Battery Slot [BAT1] (battery present)
[    1.068612] ima: No architecture policies found
[    1.068625] evm: Initialising EVM extended attributes:
[    1.068625] evm: security.selinux
[    1.068626] evm: security.SMACK64
[    1.068626] evm: security.SMACK64EXEC
[    1.068627] evm: security.SMACK64TRANSMUTE
[    1.068627] evm: security.SMACK64MMAP
[    1.068627] evm: security.apparmor
[    1.068627] evm: security.ima
[    1.068628] evm: security.capability
[    1.068628] evm: HMAC attrs: 0x1
[    1.069777] PM:   Magic number: 5:408:944
[    1.069804] tty tty1: hash matches
[    1.070055] rtc_cmos rtc_cmos: setting system clock to 2021-05-11T16:54:34 UTC (1620752074)
[    1.070943] Freeing unused decrypted memory: 2040K
[    1.071251] Freeing unused kernel image memory: 2720K
[    1.071252] Write protecting the kernel read-only data: 22528k
[    1.071661] Freeing unused kernel image memory: 2008K
[    1.071830] Freeing unused kernel image memory: 1212K
[    1.078156] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.078158] Run /init as init process
[    1.129241] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[    1.142058] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.142144] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.149593] cryptd: max_cpu_qlen set to 1000
[    1.188553] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    1.195141] nvme nvme0: pci function 0000:02:00.0
[    1.195238] AVX2 version of gcm_enc/dec engaged.
[    1.195239] AES CTR mode by8 optimization enabled
[    1.216468] MXM: GUID detected in BIOS
[    1.216604] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[    1.216915] ACPI Warning: \_SB.PCI0.RP09.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[    1.217222] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.217225] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP09.PEGP handle
[    1.217225] nouveau: detected PR support, will not use DSM
[    1.217238] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    1.217320] checking generic (80000000 7e9000) vs hw (80000000 10000000)
[    1.217320] fb0: switching to inteldrmfb from EFI VGA
[    1.217418] Console: switching to colour dummy device 80x25
[    1.217444] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.217535] nouveau 0000:01:00.0: NVIDIA GP108 (138000a1)
[    1.219908] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.219909] [drm] Driver supports precise vblank timestamp query.
[    1.221277] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.239021] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.341215] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    1.341217] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.341220] usb 1-5: Product: USB2.0-CRW
[    1.341221] usb 1-5: Manufacturer: Generic
[    1.341222] usb 1-5: SerialNumber: 20100201396000000
[    1.347837] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    1.468476] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.477329] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.477680] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    1.477792] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.477848] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/LNXVIDEO:01/input/input8
[    1.478171] nvme nvme0: 8/0/0 default/read/poll queues
[    1.480263]  nvme0n1: p1 p2 p3
[    1.492672] fbcon: i915drmfb (fb0) is primary device
[    1.502733] Console: switching to colour frame buffer device 240x67
[    1.520828] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    1.609627] nouveau 0000:01:00.0: bios: version 86.08.2d.00.7f
[    1.623305] usb 1-6: New USB device found, idVendor=06cb, idProduct=009b, bcdDevice= 1.54
[    1.623324] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.623325] usb 1-6: SerialNumber: 3aa49400657a
[    1.691043] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    1.703733] vga_switcheroo: enabled
[    1.703820] [TTM] Zone  kernel: Available graphics memory: 3995622 KiB
[    1.703821] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.703821] [TTM] Initializing pool allocator
[    1.703823] [TTM] Initializing DMA pool allocator
[    1.703830] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    1.703831] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[    1.703832] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[    1.703833] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[    1.703833] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found
[    1.703834] nouveau 0000:01:00.0: DRM: DCB version 4.1
[    1.705260] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    1.705464] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.764508] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    1.764526] tsc: Refined TSC clocksource calibration: 1992.000 MHz
[    1.764529] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[    1.764613] clocksource: Switched to clocksource tsc
[    1.892087] psmouse serio1: synaptics: queried max coordinates: x [..5680], y [..4762]
[    1.913947] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    1.913965] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.919578] usbcore: registered new interface driver rtsx_usb
[    1.921608] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1092..]
[    1.921611] psmouse serio1: synaptics: Your touchpad (PNP: SYN150e SYN1500 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    1.978743] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x400000, board id: 3438, fw id: 2740447
[    2.015656] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.092421] raid6: avx2x4   gen() 36744 MB/s
[    2.140420] raid6: avx2x4   xor() 24778 MB/s
[    2.162047] mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
[    2.162047] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[    2.162048] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162049] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162091] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162092] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162093] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162094] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162095] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.162095] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.163061] mce: CPU4: Core temperature/speed normal
[    2.163061] mce: CPU4: Package temperature/speed normal
[    2.163062] mce: CPU0: Core temperature/speed normal
[    2.163062] mce: CPU0: Package temperature/speed normal
[    2.163108] mce: CPU5: Package temperature/speed normal
[    2.163109] mce: CPU6: Package temperature/speed normal
[    2.163109] mce: CPU2: Package temperature/speed normal
[    2.163110] mce: CPU1: Package temperature/speed normal
[    2.163111] mce: CPU7: Package temperature/speed normal
[    2.163111] mce: CPU3: Package temperature/speed normal
[    2.188420] raid6: avx2x2   gen() 34982 MB/s
[    2.236420] raid6: avx2x2   xor() 22588 MB/s
[    2.284420] raid6: avx2x1   gen() 28342 MB/s
[    2.332420] raid6: avx2x1   xor() 20581 MB/s
[    2.380422] raid6: sse2x4   gen() 15629 MB/s
[    2.428422] raid6: sse2x4   xor() 10565 MB/s
[    2.476420] raid6: sse2x2   gen() 14403 MB/s
[    2.524422] raid6: sse2x2   xor()  9880 MB/s
[    2.572425] raid6: sse2x1   gen() 12736 MB/s
[    2.620421] raid6: sse2x1   xor()  7535 MB/s
[    2.620421] raid6: using algorithm avx2x4 gen() 36744 MB/s
[    2.620422] raid6: .... xor() 24778 MB/s, rmw enabled
[    2.620422] raid6: using avx2x2 recovery algorithm
[    2.622363] xor: automatically using best checksumming function   avx       
[    2.633253] Btrfs loaded, crc32c=crc32c-intel
[    2.668333] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.790393] systemd[1]: Inserted module 'autofs4'
[    2.835696] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.852583] systemd[1]: Detected architecture x86-64.
[    2.873121] systemd[1]: Set hostname to <martin-PS42-Modern-8RA>.
[    2.935598] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    2.975454] systemd[1]: Created slice system-modprobe.slice.
[    2.975630] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.975767] systemd[1]: Created slice User and Session Slice.
[    2.975798] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.975933] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.975955] systemd[1]: Reached target User and Group Name Lookups.
[    2.975968] systemd[1]: Reached target Remote File Systems.
[    2.975975] systemd[1]: Reached target Slices.
[    2.976015] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.976064] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.976104] systemd[1]: Listening on Syslog Socket.
[    2.977158] systemd[1]: Listening on Process Core Dump Socket.
[    2.977204] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.977231] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.977321] systemd[1]: Listening on Journal Audit Socket.
[    2.977367] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.977414] systemd[1]: Listening on Journal Socket.
[    2.977460] systemd[1]: Listening on udev Control Socket.
[    2.977497] systemd[1]: Listening on udev Kernel Socket.
[    2.978036] systemd[1]: Mounting Huge Pages File System...
[    2.978563] systemd[1]: Mounting POSIX Message Queue File System...
[    2.979157] systemd[1]: Mounting Kernel Debug File System...
[    2.979707] systemd[1]: Mounting Kernel Trace File System...
[    2.980937] systemd[1]: Starting Journal Service...
[    2.981735] systemd[1]: Starting Availability of block devices...
[    2.982620] systemd[1]: Starting Set the console keyboard layout...
[    2.983372] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.984061] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.984094] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    2.984488] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.984509] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.985514] systemd[1]: Starting Load Kernel Modules...
[    2.986398] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.987550] systemd[1]: Starting udev Coldplug all Devices...
[    2.988691] systemd[1]: Starting Uncomplicated firewall...
[    2.990602] systemd[1]: Mounted Huge Pages File System.
[    2.990792] systemd[1]: Mounted POSIX Message Queue File System.
[    2.991092] systemd[1]: Mounted Kernel Debug File System.
[    2.991496] systemd[1]: Mounted Kernel Trace File System.
[    2.993015] systemd[1]: Finished Availability of block devices.
[    2.994223] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.995019] systemd[1]: Finished Uncomplicated firewall.
[    2.999816] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[    3.000655] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.001532] systemd[1]: Activating swap /swapfile...
[    3.001864] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.001907] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    3.002634] systemd[1]: Starting Load/Save Random Seed...
[    3.003466] systemd[1]: Starting Create System Users...
[    3.012250] lp: driver loaded but no devices found
[    3.020969] ppdev: user-space parallel port driver
[    3.025056] systemd[1]: Finished Load/Save Random Seed.
[    3.028578] systemd[1]: Finished Load Kernel Modules.
[    3.029248] systemd[1]: Finished Create System Users.
[    3.030335] systemd[1]: Mounting FUSE Control File System...
[    3.031191] systemd[1]: Mounting Kernel Configuration File System...
[    3.032564] systemd[1]: Starting Apply Kernel Variables...
[    3.033709] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.034920] systemd[1]: Mounted FUSE Control File System.
[    3.035050] systemd[1]: Mounted Kernel Configuration File System.
[    3.046650] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.048159] systemd[1]: Starting udev Kernel Device Manager...
[    3.052730] systemd[1]: Finished Apply Kernel Variables.
[    3.062507] systemd[1]: Finished Set the console keyboard layout.
[    3.080091] systemd[1]: Started Journal Service.
[    3.086476] systemd-journald[361]: Received client request to flush runtime journal.
[    3.088475] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    3.326688] soc_button_array ACPI0011:00: Unknown button index 0 upage 01 usage c6, ignoring
[    3.445168] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.452859] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.454848] input: MSI WMI hotkeys as /devices/virtual/input/input9
[    3.454968] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.458436] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.458437] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.458438] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.458438] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.458439] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.458440] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.473620] Bluetooth: Core ver 2.22
[    3.473634] NET: Registered protocol family 31
[    3.473635] Bluetooth: HCI device and connection manager initialized
[    3.473638] Bluetooth: HCI socket layer initialized
[    3.473640] Bluetooth: L2CAP socket layer initialized
[    3.473642] Bluetooth: SCO socket layer initialized
[    3.532642] Intel(R) Wireless WiFi driver for Linux
[    3.532643] Copyright(c) 2003- 2015 Intel Corporation
[    3.532702] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    3.536197] usbcore: registered new interface driver btusb
[    3.545689] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
[    3.545692] iwlwifi 0000:00:14.3: Found debug configuration: 0
[    3.546021] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm
[    3.550282] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[    3.551181] Bluetooth: hci0: Device revision is 2
[    3.551182] Bluetooth: hci0: Secure boot is enabled
[    3.551182] Bluetooth: hci0: OTP lock is enabled
[    3.551183] Bluetooth: hci0: API lock is enabled
[    3.551183] Bluetooth: hci0: Debug lock is disabled
[    3.551184] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    3.553806] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[    3.605011] input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.3.auto/input/input10
[    3.614390] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
[    3.622114] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    3.622604] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor.
[    3.667805] iwlwifi 0000:00:14.3: base HW address: 18:56:80:5f:e7:86
[    3.734951] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.735340] thermal thermal_zone3: failed to read out thermal zone (-61)
[    3.738110] audit: type=1400 audit(1620752077.162:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=526 comm="apparmor_parser"
[    3.794635] audit: type=1400 audit(1620752077.218:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=566 comm="apparmor_parser"
[    3.805733] audit: type=1400 audit(1620752077.230:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=523 comm="apparmor_parser"
[    3.810672] audit: type=1400 audit(1620752077.234:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=525 comm="apparmor_parser"
[    3.839364] intel_rapl_common: Found RAPL domain package
[    3.839366] intel_rapl_common: Found RAPL domain core
[    3.839367] intel_rapl_common: Found RAPL domain uncore
[    3.839368] intel_rapl_common: Found RAPL domain dram
[    3.887530] audit: type=1400 audit(1620752077.310:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=522 comm="apparmor_parser"
[    3.887930] audit: type=1400 audit(1620752077.310:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=522 comm="apparmor_parser"
[    3.888388] audit: type=1400 audit(1620752077.310:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=522 comm="apparmor_parser"
[    3.889908] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.890270] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.908445] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    3.925848] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.925851] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.925852] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.925854] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.925855] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.925857] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.925858] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.943166] audit: type=1400 audit(1620752077.366:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=572 comm="apparmor_parser"
[    3.943726] audit: type=1400 audit(1620752077.366:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=572 comm="apparmor_parser"
[    3.986957] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.987024] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.987082] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.987136] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.987189] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.987252] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.987313] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    5.004020] Bluetooth: hci0: Waiting for firmware download to complete
[    5.004143] Bluetooth: hci0: Firmware loaded in 1426598 usecs
[    5.004264] Bluetooth: hci0: Waiting for device to boot
[    5.017150] Bluetooth: hci0: Device booted in 12641 usecs
[    5.017401] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[    5.020192] Bluetooth: hci0: Applying Intel DDC parameters completed
[    7.067192] kauditd_printk_skb: 11 callbacks suppressed
[    7.067193] audit: type=1400 audit(1620752080.490:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=521 comm="apparmor_parser"
[    7.067782] audit: type=1400 audit(1620752080.490:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=521 comm="apparmor_parser"
[    7.246342] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.246344] Bluetooth: BNEP filters: protocol multicast
[    7.246348] Bluetooth: BNEP socket layer initialized
[    7.258480] NET: Registered protocol family 38
[    7.266453] audit: type=1400 audit(1620752080.690:24): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=737 comm="cups-browsed" capability=23  capname="sys_nice"
[    7.441943] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    7.555763] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    7.620865] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[    7.632181] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[    9.532644] Bluetooth: RFCOMM TTY layer initialized
[    9.532648] Bluetooth: RFCOMM socket layer initialized
[    9.532651] Bluetooth: RFCOMM ver 1.11
[   11.128480] wlo1: authenticate with 50:d4:f7:64:41:2c
[   11.135508] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[   11.176230] wlo1: authenticated
[   11.180635] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[   11.196795] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=2)
[   11.204478] wlo1: associated
[   11.253007] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[  302.512031] ACPI Error: No handler for Region [VRTC] (00000000008209e7) [SystemCMOS] (20190816/evregion-127)
[  302.512048] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exfldio-261)
[  302.512071] No Local Variables are initialized for Method [_Q9A]
[  302.512074] No Arguments are initialized for method [_Q9A]
[  302.512079] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20190816/psparse-529)
[ 2588.003172] systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2588.020497] systemd[1]: Detected architecture x86-64.
[ 2588.248230] systemd-journald[361]: Received SIGTERM from PID 1 (systemd).
[ 2588.248331] systemd[1]: Stopping Journal Service...
[ 2588.256925] systemd[1]: systemd-journald.service: Succeeded.
[ 2588.257200] systemd[1]: Stopped Journal Service.
[ 2588.258618] systemd[1]: Starting Journal Service...
[ 2588.296402] systemd[1]: Started Journal Service.
[ 2588.304172] systemd-journald[5185]: Received client request to flush runtime journal.
[ 2630.614570] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 2630.614572] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614572] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614573] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 2630.614574] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614575] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614600] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614601] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614603] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.614604] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 118)
[ 2630.615493] mce: CPU2: Core temperature/speed normal
[ 2630.615494] mce: CPU4: Package temperature/speed normal
[ 2630.615495] mce: CPU6: Core temperature/speed normal
[ 2630.615495] mce: CPU0: Package temperature/speed normal
[ 2630.615496] mce: CPU2: Package temperature/speed normal
[ 2630.615496] mce: CPU6: Package temperature/speed normal
[ 2630.615527] mce: CPU5: Package temperature/speed normal
[ 2630.615527] mce: CPU1: Package temperature/speed normal
[ 2630.615529] mce: CPU3: Package temperature/speed normal
[ 2630.615529] mce: CPU7: Package temperature/speed normal
[ 2690.043559] audit: type=1400 audit(1620754763.269:25): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=22968 comm="apparmor_parser"
[ 2690.043805] audit: type=1400 audit(1620754763.269:26): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=22968 comm="apparmor_parser"
[ 2690.044032] audit: type=1400 audit(1620754763.269:27): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=22968 comm="apparmor_parser"
[ 2690.044382] audit: type=1400 audit(1620754763.269:28): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=22968 comm="apparmor_parser"
[ 2691.668969] wlo1: deauthenticating from 50:d4:f7:64:41:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2693.948056] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 2693.955176] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2693.964033] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 2693.975947] QNX4 filesystem 0.2.3 registered.
[ 2704.725535] wlo1: authenticate with 50:d4:f7:64:41:2c
[ 2704.731506] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[ 2704.771375] wlo1: authenticated
[ 2704.774618] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[ 2704.790624] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=2)
[ 2704.794920] wlo1: associated
[ 2704.804210] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 2939.022067] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 2939.179478] usb 1-7: New USB device found, idVendor=5986, idProduct=211b, bcdDevice= 3.02
[ 2939.179481] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2939.179482] usb 1-7: Product: HD Webcam
[ 2939.179483] usb 1-7: Manufacturer: SunplusIT Inc
[ 2939.196951] mc: Linux media interface: v0.10
[ 2939.204728] videodev: Linux video capture interface: v2.00
[ 2939.214206] uvcvideo: Found UVC 1.00 device HD Webcam (5986:211b)
[ 2939.231061] input: HD Webcam: HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input18
[ 2939.231141] usbcore: registered new interface driver uvcvideo
[ 2939.231141] USB Video Class driver (1.1.1)
[ 3014.665206] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 106)
[ 3014.665207] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 106)
[ 3014.665208] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665208] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665248] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665249] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665250] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665251] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665251] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.665252] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 259)
[ 3014.672266] mce: CPU0: Package temperature/speed normal
[ 3014.672266] mce: CPU2: Core temperature/speed normal
[ 3014.672267] mce: CPU6: Core temperature/speed normal
[ 3014.672267] mce: CPU4: Package temperature/speed normal
[ 3014.672268] mce: CPU2: Package temperature/speed normal
[ 3014.672268] mce: CPU6: Package temperature/speed normal
[ 3014.672303] mce: CPU1: Package temperature/speed normal
[ 3014.672303] mce: CPU5: Package temperature/speed normal
[ 3014.672304] mce: CPU3: Package temperature/speed normal
[ 3014.672305] mce: CPU7: Package temperature/speed normal
[ 3280.317965] input: SRS-XB12 (AVRCP) as /devices/virtual/input/input19
[ 3912.467206] spotify[44170]: segfault at 10 ip 00007f277f60afc4 sp 00007ffdc429e718 error 4 in libpthread-2.31.so[7f277f606000+11000]
[ 3912.467212] Code: 7e 8f 45 31 d2 ba 01 00 00 00 be 01 00 00 00 48 89 ef b8 ca 00 00 00 0f 05 e9 73 ff ff ff e8 13 b7 ff ff 0f 1f 00 f3 0f 1e fa <8b> 47 10 89 c2 81 e2 7f 01 00 00 90 83 e0 7c 75 7b 53 48 83 ec 10
[ 3921.752115] ACPI Error: No handler for Region [VRTC] (00000000008209e7) [SystemCMOS] (20190816/evregion-127)
[ 3921.752131] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exfldio-261)
[ 3921.752155] No Local Variables are initialized for Method [_Q9A]
[ 3921.752158] No Arguments are initialized for method [_Q9A]
[ 3921.752163] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20190816/psparse-529)
[ 4953.185926] nouveau 0000:01:00.0: Enabling HDA controller
[ 5372.390766] mmc0: new ultra high speed SDR50 SDXC card at address 0001
[ 5372.404771] mmcblk0: mmc0:0001 ED4QT 119 GiB
[ 5372.406801]  mmcblk0: p1
[ 5521.835536] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 117)
[ 5521.835537] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 117)
[ 5521.835538] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835538] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835575] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835576] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835577] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835577] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835578] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.835579] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 270)
[ 5521.839504] mce: CPU6: Core temperature/speed normal
[ 5521.839505] mce: CPU1: Package temperature/speed normal
[ 5521.839505] mce: CPU2: Core temperature/speed normal
[ 5521.839506] mce: CPU5: Package temperature/speed normal
[ 5521.839506] mce: CPU2: Package temperature/speed normal
[ 5521.839507] mce: CPU6: Package temperature/speed normal
[ 5521.839541] mce: CPU3: Package temperature/speed normal
[ 5521.839542] mce: CPU0: Package temperature/speed normal
[ 5521.839543] mce: CPU7: Package temperature/speed normal
[ 5521.839543] mce: CPU4: Package temperature/speed normal
[ 6455.911490] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 124)
[ 6455.911490] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 124)
[ 6455.911491] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911492] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911528] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911529] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911530] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911531] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911532] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.911532] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 277)
[ 6455.912499] mce: CPU6: Core temperature/speed normal
[ 6455.912499] mce: CPU2: Core temperature/speed normal
[ 6455.912500] mce: CPU5: Package temperature/speed normal
[ 6455.912500] mce: CPU1: Package temperature/speed normal
[ 6455.912501] mce: CPU2: Package temperature/speed normal
[ 6455.912501] mce: CPU6: Package temperature/speed normal
[ 6455.912536] mce: CPU0: Package temperature/speed normal
[ 6455.912536] mce: CPU4: Package temperature/speed normal
[ 6455.912537] mce: CPU7: Package temperature/speed normal
[ 6455.912538] mce: CPU3: Package temperature/speed normal
[ 6962.846546] debugfs: File 'le_min_key_size' in directory 'hci0' already present!
[ 6962.846555] debugfs: File 'le_max_key_size' in directory 'hci0' already present!
[ 7540.722828] ACPI Error: No handler for Region [VRTC] (00000000008209e7) [SystemCMOS] (20190816/evregion-127)
[ 7540.722846] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exfldio-261)
[ 7540.722865] No Local Variables are initialized for Method [_Q9A]
[ 7540.722868] No Arguments are initialized for method [_Q9A]
[ 7540.722872] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20190816/psparse-529)
[ 7728.189518] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 9222.676752] perf: interrupt took too long (3171 > 3133), lowering kernel.perf_event_max_sample_rate to 63000
[ 9338.127812] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 143)
[ 9338.127813] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 143)
[ 9338.127814] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127814] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127851] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127852] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127853] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127854] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127855] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.127855] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 296)
[ 9338.129711] mce: CPU2: Core temperature/speed normal
[ 9338.129712] mce: CPU6: Core temperature/speed normal
[ 9338.129713] mce: CPU2: Package temperature/speed normal
[ 9338.129713] mce: CPU6: Package temperature/speed normal
[ 9338.129752] mce: CPU4: Package temperature/speed normal
[ 9338.129752] mce: CPU0: Package temperature/speed normal
[ 9338.129753] mce: CPU7: Package temperature/speed normal
[ 9338.129754] mce: CPU5: Package temperature/speed normal
[ 9338.129755] mce: CPU3: Package temperature/speed normal
[ 9338.129755] mce: CPU1: Package temperature/speed normal
[ 9682.518024] perf: interrupt took too long (4079 > 3963), lowering kernel.perf_event_max_sample_rate to 49000
[10425.166226] wlo1: deauthenticating from 50:d4:f7:64:41:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[10425.283530] PM: suspend entry (deep)
[10425.301482] Filesystems sync: 0.017 seconds
[10425.302366] Freezing user space processes ... (elapsed 0.003 seconds) done.
[10425.306284] OOM killer disabled.
[10425.306284] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10425.307465] printk: Suspending console(s) (use no_console_suspend to debug)
[10426.048809] ACPI: EC: interrupt blocked
[10426.204408] ACPI: Preparing to enter system sleep state S3
[10426.208638] ACPI: EC: event blocked
[10426.208640] ACPI: EC: EC stopped
[10426.208641] PM: Saving platform NVS memory
[10426.208717] Disabling non-boot CPUs ...
[10426.209548] IRQ 142: no longer affine to CPU1
[10426.210609] smpboot: CPU 1 is now offline
[10426.215358] IRQ 127: no longer affine to CPU2
[10426.216405] smpboot: CPU 2 is now offline
[10426.221078] IRQ 126: no longer affine to CPU3
[10426.223280] smpboot: CPU 3 is now offline
[10426.230591] smpboot: CPU 4 is now offline
[10426.236048] IRQ 124: no longer affine to CPU5
[10426.237114] smpboot: CPU 5 is now offline
[10426.242274] IRQ 122: no longer affine to CPU6
[10426.242289] IRQ 141: no longer affine to CPU6
[10426.243350] smpboot: CPU 6 is now offline
[10426.248684] IRQ 137: no longer affine to CPU7
[10426.248693] IRQ 138: no longer affine to CPU7
[10426.248699] IRQ 139: no longer affine to CPU7
[10426.248704] IRQ 140: no longer affine to CPU7
[10426.249778] smpboot: CPU 7 is now offline
[10426.259058] ACPI: Low-level resume complete
[10426.259260] ACPI: EC: EC started
[10426.259263] PM: Restoring platform NVS memory
[10426.272422] Enabling non-boot CPUs ...
[10426.272597] x86: Booting SMP configuration:
[10426.272602] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10426.285547] microcode: sig=0x806eb, pf=0x80, revision=0xb8
[10426.296402] microcode: updated to revision 0xde, date = 2020-06-03
[10426.297837] CPU1 is up
[10426.297977] smpboot: Booting Node 0 Processor 2 APIC 0x4
[10426.312887] CPU2 is up
[10426.313001] smpboot: Booting Node 0 Processor 3 APIC 0x6
[10426.328072] CPU3 is up
[10426.328190] smpboot: Booting Node 0 Processor 4 APIC 0x1
[10426.331553] microcode: sig=0x806eb, pf=0x80, revision=0xde
[10426.333434] CPU4 is up
[10426.333577] smpboot: Booting Node 0 Processor 5 APIC 0x3
[10426.337865] CPU5 is up
[10426.337983] smpboot: Booting Node 0 Processor 6 APIC 0x5
[10426.342438] CPU6 is up
[10426.342557] smpboot: Booting Node 0 Processor 7 APIC 0x7
[10426.347161] CPU7 is up
[10426.362602] ACPI: Waking up from system sleep state S3
[10426.378016] ACPI: EC: interrupt unblocked
[10426.523017] ACPI: EC: event unblocked
[10426.639076] nvme nvme0: 8/0/0 default/read/poll queues
[10426.776719] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[10427.052607] usb 1-7: reset high-speed USB device number 5 using xhci_hcd
[10427.264918] psmouse serio1: synaptics: queried max coordinates: x [..5680], y [..4762]
[10427.296970] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1092..]
[10427.328337] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[10427.604133] usb 1-10: reset full-speed USB device number 4 using xhci_hcd
[10427.731625] usb 1-10: device descriptor read/64, error -71
[10427.967639] usb 1-10: device descriptor read/64, error -71
[10428.203959] usb 1-10: reset full-speed USB device number 4 using xhci_hcd
[10428.331593] usb 1-10: device descriptor read/64, error -71
[10428.567797] usb 1-10: device descriptor read/64, error -71
[10428.803802] usb 1-10: reset full-speed USB device number 4 using xhci_hcd
[10428.804144] usb 1-10: Device not responding to setup address.
[10429.011905] usb 1-10: Device not responding to setup address.
[10429.219668] usb 1-10: device not accepting address 4, error -71
[10429.347704] usb 1-10: reset full-speed USB device number 4 using xhci_hcd
[10429.347943] usb 1-10: Device not responding to setup address.
[10429.555905] usb 1-10: Device not responding to setup address.
[10429.763685] usb 1-10: device not accepting address 4, error -71
[10429.764991] acpi LNXPOWER:05: Turning OFF
[10429.765055] acpi LNXPOWER:01: Turning OFF
[10429.765179] OOM killer enabled.
[10429.765181] Restarting tasks ...
[10429.775574] nouveau 0000:01:00.0: Enabling HDA controller
[10429.782733] done.
[10429.783384] usb 1-10: USB disconnect, device number 4
[10429.785959] thermal thermal_zone3: failed to read out thermal zone (-61)
[10429.919443] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[10429.923488] PM: suspend exit
[10429.958681] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[10429.991116] iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0.
[10429.991189] iwlwifi 0000:00:14.3: Start IWL Error Log Dump:
[10429.991190] iwlwifi 0000:00:14.3: Status: 0x00000000, count: 2122219134
[10429.991191] iwlwifi 0000:00:14.3: Loaded firmware version: 46.6bf1df06.0
[10429.991193] iwlwifi 0000:00:14.3: 0x7E7E7E7E | ADVANCED_SYSASSERT          
[10429.991194] iwlwifi 0000:00:14.3: 0x7E7E7E7E | trm_hw_status0
[10429.991195] iwlwifi 0000:00:14.3: 0x7E7E7E7E | trm_hw_status1
[10429.991196] iwlwifi 0000:00:14.3: 0x7E7E7E7E | branchlink2
[10429.991197] iwlwifi 0000:00:14.3: 0x7E7E7E7E | interruptlink1
[10429.991198] iwlwifi 0000:00:14.3: 0x7E7E7E7E | interruptlink2
[10429.991198] iwlwifi 0000:00:14.3: 0x7E7E7E7E | data1
[10429.991199] iwlwifi 0000:00:14.3: 0x7E7E7E7E | data2
[10429.991200] iwlwifi 0000:00:14.3: 0x7E7E7E7E | data3
[10429.991201] iwlwifi 0000:00:14.3: 0x7E7E7E7E | beacon time
[10429.991202] iwlwifi 0000:00:14.3: 0x7E7E7E7E | tsf low
[10429.991203] iwlwifi 0000:00:14.3: 0x7E7E7E7E | tsf hi
[10429.991204] iwlwifi 0000:00:14.3: 0x7E7E7E7E | time gp1
[10429.991205] iwlwifi 0000:00:14.3: 0x7E7E7E7E | time gp2
[10429.991206] iwlwifi 0000:00:14.3: 0x7E7E7E7E | uCode revision type
[10429.991207] iwlwifi 0000:00:14.3: 0x7E7E7E7E | uCode version major
[10429.991208] iwlwifi 0000:00:14.3: 0x7E7E7E7E | uCode version minor
[10429.991209] iwlwifi 0000:00:14.3: 0x7E7E7E7E | hw version
[10429.991210] iwlwifi 0000:00:14.3: 0x7E7E7E7E | board version
[10429.991211] iwlwifi 0000:00:14.3: 0x7E7E7E7E | hcmd
[10429.991211] iwlwifi 0000:00:14.3: 0x7E7E7E7E | isr0
[10429.991212] iwlwifi 0000:00:14.3: 0x7E7E7E7E | isr1
[10429.991213] iwlwifi 0000:00:14.3: 0x7E7E7E7E | isr2
[10429.991214] iwlwifi 0000:00:14.3: 0x7E7E7E7E | isr3
[10429.991215] iwlwifi 0000:00:14.3: 0x7E7E7E7E | isr4
[10429.991216] iwlwifi 0000:00:14.3: 0x7E7E7E7E | last cmd Id
[10429.991217] iwlwifi 0000:00:14.3: 0x7E7E7E7E | wait_event
[10429.991218] iwlwifi 0000:00:14.3: 0x7E7E7E7E | l2p_control
[10429.991219] iwlwifi 0000:00:14.3: 0x7E7E7E7E | l2p_duration
[10429.991220] iwlwifi 0000:00:14.3: 0x7E7E7E7E | l2p_mhvalid
[10429.991221] iwlwifi 0000:00:14.3: 0x7E7E7E7E | l2p_addr_match
[10429.991221] iwlwifi 0000:00:14.3: 0x7E7E7E7E | lmpm_pmg_sel
[10429.991222] iwlwifi 0000:00:14.3: 0x7E7E7E7E | timestamp
[10429.991223] iwlwifi 0000:00:14.3: 0x7E7E7E7E | flow_handler
[10429.991258] iwlwifi 0000:00:14.3: Start IWL Error Log Dump:
[10429.991259] iwlwifi 0000:00:14.3: Status: 0x00000000, count: 7
[10429.991260] iwlwifi 0000:00:14.3: 0x20000070 | NMI_INTERRUPT_LMAC_FATAL
[10429.991261] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1
[10429.991262] iwlwifi 0000:00:14.3: 0xC008885E | umac branchlink2
[10429.991263] iwlwifi 0000:00:14.3: 0x00000000 | umac interruptlink1
[10429.991264] iwlwifi 0000:00:14.3: 0xC008D5F8 | umac interruptlink2
[10429.991265] iwlwifi 0000:00:14.3: 0x00000800 | umac data1
[10429.991266] iwlwifi 0000:00:14.3: 0xC008D5F8 | umac data2
[10429.991267] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data3
[10429.991268] iwlwifi 0000:00:14.3: 0x0000002E | umac major
[10429.991269] iwlwifi 0000:00:14.3: 0x6BF1DF06 | umac minor
[10429.991269] iwlwifi 0000:00:14.3: 0x00000028 | frame pointer
[10429.991270] iwlwifi 0000:00:14.3: 0xC0887EF8 | stack pointer
[10429.991271] iwlwifi 0000:00:14.3: 0x0000FFFF | last host cmd
[10429.991272] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg
[10429.991289] iwlwifi 0000:00:14.3: Fseq Registers:
[10429.991298] iwlwifi 0000:00:14.3: 0x8210524F | FSEQ_ERROR_CODE
[10429.991306] iwlwifi 0000:00:14.3: 0x00000000 | FSEQ_TOP_INIT_VERSION
[10429.991314] iwlwifi 0000:00:14.3: 0xB42398B1 | FSEQ_CNVIO_INIT_VERSION
[10429.991323] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION
[10429.991331] iwlwifi 0000:00:14.3: 0xF2D0BC4B | FSEQ_TOP_CONTENT_VERSION
[10429.991339] iwlwifi 0000:00:14.3: 0x83A73731 | FSEQ_ALIVE_TOKEN
[10429.991348] iwlwifi 0000:00:14.3: 0xAE45C88A | FSEQ_CNVI_ID
[10429.991356] iwlwifi 0000:00:14.3: 0x29C71ED1 | FSEQ_CNVR_ID
[10429.991365] iwlwifi 0000:00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP
[10429.991375] iwlwifi 0000:00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP
[10429.991386] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
[10429.991426] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
[10429.991508] iwlwifi 0000:00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x238f
[10429.991514] iwlwifi 0000:00:14.3: Failed to start INIT ucode: -5
[10429.991518] iwlwifi 0000:00:14.3: Failed to run INIT ucode: -5
[10429.991521] iwlwifi 0000:00:14.3: Failed to start RT ucode: -5
[10429.991525] iwlwifi 0000:00:14.3: Collecting data: trigger 16 fired.
[10430.051414] usb 1-10: device descriptor read/64, error -71
[10430.239765] iwlwifi 0000:00:14.3: Firmware not running - cannot dump error
[10430.267627] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[10430.287463] usb 1-10: device descriptor read/64, error -71
[10430.383647] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[10430.449269] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[10430.468588] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[10430.523426] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[10430.655575] usb 1-10: device descriptor read/64, error -71
[10430.891431] usb 1-10: device descriptor read/64, error -71
[10430.999538] usb usb1-port10: attempt power cycle
[10431.663457] usb 1-10: new full-speed USB device number 8 using xhci_hcd
[10431.663628] usb 1-10: Device not responding to setup address.
[10431.875582] usb 1-10: Device not responding to setup address.
[10432.083443] usb 1-10: device not accepting address 8, error -71
[10432.215432] usb 1-10: new full-speed USB device number 9 using xhci_hcd
[10432.215637] usb 1-10: Device not responding to setup address.
[10432.423619] usb 1-10: Device not responding to setup address.
[10432.631344] usb 1-10: device not accepting address 9, error -71
[10432.631438] usb usb1-port10: unable to enumerate USB device
[10478.593340] wlo1: authenticate with 50:d4:f7:64:41:2c
[10478.594935] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[10478.703470] wlo1: authenticated
[10478.706575] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[10478.721106] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=1)
[10478.724844] wlo1: associated
[10478.735498] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[10660.637093] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2437 MHz, width 1 (2437/0 MHz)
[12493.017809] wlo1: deauthenticating from 50:d4:f7:64:41:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[12493.125717] PM: suspend entry (deep)
[12493.128812] Filesystems sync: 0.003 seconds
[12493.129335] Freezing user space processes ... (elapsed 0.003 seconds) done.
[12493.133368] OOM killer disabled.
[12493.133368] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12493.134597] printk: Suspending console(s) (use no_console_suspend to debug)
[12493.883402] ACPI: EC: interrupt blocked
[12494.036164] ACPI: Preparing to enter system sleep state S3
[12494.040383] ACPI: EC: event blocked
[12494.040384] ACPI: EC: EC stopped
[12494.040386] PM: Saving platform NVS memory
[12494.040464] Disabling non-boot CPUs ...
[12494.041291] IRQ 142: no longer affine to CPU1
[12494.042351] smpboot: CPU 1 is now offline
[12494.045629] IRQ 126: no longer affine to CPU2
[12494.046709] smpboot: CPU 2 is now offline
[12494.050030] IRQ 140: no longer affine to CPU3
[12494.051095] smpboot: CPU 3 is now offline
[12494.054709] IRQ 139: no longer affine to CPU4
[12494.056890] smpboot: CPU 4 is now offline
[12494.060191] IRQ 124: no longer affine to CPU5
[12494.060207] IRQ 141: no longer affine to CPU5
[12494.061259] smpboot: CPU 5 is now offline
[12494.064466] IRQ 122: no longer affine to CPU6
[12494.065516] smpboot: CPU 6 is now offline
[12494.068793] IRQ 137: no longer affine to CPU7
[12494.068800] IRQ 138: no longer affine to CPU7
[12494.069863] smpboot: CPU 7 is now offline
[12494.076199] ACPI: Low-level resume complete
[12494.076289] ACPI: EC: EC started
[12494.076290] PM: Restoring platform NVS memory
[12494.080102] Enabling non-boot CPUs ...
[12494.080159] x86: Booting SMP configuration:
[12494.080160] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12494.080800] microcode: sig=0x806eb, pf=0x80, revision=0xb8
[12494.083801] CPU1 is up
[12494.083832] smpboot: Booting Node 0 Processor 2 APIC 0x4
[12494.086090] CPU2 is up
[12494.086116] smpboot: Booting Node 0 Processor 3 APIC 0x6
[12494.088389] CPU3 is up
[12494.088416] smpboot: Booting Node 0 Processor 4 APIC 0x1
[12494.088918] microcode: sig=0x806eb, pf=0x80, revision=0xde
[12494.089307] CPU4 is up
[12494.089336] smpboot: Booting Node 0 Processor 5 APIC 0x3
[12494.090080] CPU5 is up
[12494.090105] smpboot: Booting Node 0 Processor 6 APIC 0x5
[12494.090885] CPU6 is up
[12494.090910] smpboot: Booting Node 0 Processor 7 APIC 0x7
[12494.091705] CPU7 is up
[12494.094846] ACPI: Waking up from system sleep state S3
[12494.098458] ACPI: EC: interrupt unblocked
[12494.241016] ACPI: EC: event unblocked
[12494.350274] nvme nvme0: 8/0/0 default/read/poll queues
[12494.489832] usb 1-7: reset high-speed USB device number 5 using xhci_hcd
[12494.767602] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[12494.958998] psmouse serio1: synaptics: queried max coordinates: x [..5680], y [..4762]
[12494.989845] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1092..]
[12495.045394] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[12495.195892] acpi LNXPOWER:05: Turning OFF
[12495.195929] acpi LNXPOWER:01: Turning OFF
[12495.196008] OOM killer enabled.
[12495.196008] Restarting tasks ... done.
[12495.202705] nouveau 0000:01:00.0: Enabling HDA controller
[12495.220064] thermal thermal_zone3: failed to read out thermal zone (-61)
[12495.342953] usb 1-10: new full-speed USB device number 10 using xhci_hcd
[12495.351084] PM: suspend exit
[12495.376626] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[12495.471859] usb 1-10: device descriptor read/64, error -71
[12495.491173] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[12495.556382] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[12495.573345] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[12495.709320] usb 1-10: device descriptor read/64, error -71
[12495.946715] usb 1-10: new full-speed USB device number 11 using xhci_hcd
[12496.075537] usb 1-10: device descriptor read/64, error -71
[12496.312975] usb 1-10: device descriptor read/64, error -71
[12496.421459] usb usb1-port10: attempt power cycle
[12497.076979] usb 1-10: new full-speed USB device number 12 using xhci_hcd
[12497.077242] usb 1-10: Device not responding to setup address.
[12497.286198] usb 1-10: Device not responding to setup address.
[12497.495111] usb 1-10: device not accepting address 12, error -71
[12497.623694] usb 1-10: new full-speed USB device number 13 using xhci_hcd
[12497.623943] usb 1-10: Device not responding to setup address.
[12497.832817] usb 1-10: Device not responding to setup address.
[12498.041731] usb 1-10: device not accepting address 13, error -71
[12498.041851] usb usb1-port10: unable to enumerate USB device
[12499.091252] wlo1: authenticate with 50:d4:f7:64:41:2c
[12499.094284] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[12499.134989] wlo1: authenticated
[12499.142348] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[12499.155472] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=1)
[12499.161128] wlo1: associated
[12499.180462] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[12503.916510] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12504.838300] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12540.883273] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12541.907339] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12630.074007] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12631.100051] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12699.911509] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12700.935663] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12742.919594] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12743.841411] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12762.887768] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12763.912661] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12766.883968] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12767.907259] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12769.851033] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12771.182253] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12773.844610] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12775.175763] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12778.043024] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12778.862373] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12785.927878] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12787.259300] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12806.000123] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12807.022644] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12814.088324] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12815.420492] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[12954.993128] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[12955.913267] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[13176.381496] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[13177.098455] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[13254.923096] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[13256.049622] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[13673.338913] wlo1: authenticate with 50:d4:f7:64:41:2c
[13673.346841] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[13673.390168] wlo1: authenticated
[13673.393064] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[13673.406626] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=1)
[13673.411253] wlo1: associated
[13690.877016] perf: interrupt took too long (5119 > 5098), lowering kernel.perf_event_max_sample_rate to 39000
[13795.132094] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 148)
[13795.132094] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 148)
[13795.132095] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132096] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132097] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132098] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132099] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132100] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132124] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.132124] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 320)
[13795.134054] mce: CPU6: Core temperature/speed normal
[13795.134055] mce: CPU2: Core temperature/speed normal
[13795.134055] mce: CPU6: Package temperature/speed normal
[13795.134056] mce: CPU2: Package temperature/speed normal
[13795.134093] mce: CPU4: Package temperature/speed normal
[13795.134093] mce: CPU0: Package temperature/speed normal
[13795.134094] mce: CPU3: Package temperature/speed normal
[13795.134095] mce: CPU1: Package temperature/speed normal
[13795.134096] mce: CPU5: Package temperature/speed normal
[13795.134096] mce: CPU7: Package temperature/speed normal
[14018.394618] ACPI Error: No handler for Region [VRTC] (00000000008209e7) [SystemCMOS] (20190816/evregion-127)
[14018.394638] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exfldio-261)
[14018.394665] No Local Variables are initialized for Method [_Q9A]
[14018.394669] No Arguments are initialized for method [_Q9A]
[14018.394675] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20190816/psparse-529)
[14070.897668] wlo1: deauthenticating from 50:d4:f7:64:41:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[14071.012499] PM: suspend entry (deep)
[14071.018447] Filesystems sync: 0.005 seconds
[14071.019261] Freezing user space processes ... (elapsed 0.008 seconds) done.
[14071.028115] OOM killer disabled.
[14071.028117] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14071.029832] printk: Suspending console(s) (use no_console_suspend to debug)
[14071.760615] ACPI: EC: interrupt blocked
[14071.915528] ACPI: Preparing to enter system sleep state S3
[14071.919758] ACPI: EC: event blocked
[14071.919759] ACPI: EC: EC stopped
[14071.919761] PM: Saving platform NVS memory
[14071.919837] Disabling non-boot CPUs ...
[14071.920669] IRQ 142: no longer affine to CPU1
[14071.922727] smpboot: CPU 1 is now offline
[14071.926200] IRQ 126: no longer affine to CPU2
[14071.927252] smpboot: CPU 2 is now offline
[14071.931895] smpboot: CPU 3 is now offline
[14071.935671] IRQ 139: no longer affine to CPU4
[14071.937859] smpboot: CPU 4 is now offline
[14071.941196] IRQ 124: no longer affine to CPU5
[14071.942292] smpboot: CPU 5 is now offline
[14071.946146] IRQ 122: no longer affine to CPU6
[14071.946167] IRQ 141: no longer affine to CPU6
[14071.947198] smpboot: CPU 6 is now offline
[14071.950799] IRQ 137: no longer affine to CPU7
[14071.950806] IRQ 138: no longer affine to CPU7
[14071.950817] IRQ 140: no longer affine to CPU7
[14071.951851] smpboot: CPU 7 is now offline
[14071.958453] ACPI: Low-level resume complete
[14071.958540] ACPI: EC: EC started
[14071.958541] PM: Restoring platform NVS memory
[14071.962201] Enabling non-boot CPUs ...
[14071.962261] x86: Booting SMP configuration:
[14071.962262] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14071.962904] microcode: sig=0x806eb, pf=0x80, revision=0xb8
[14071.965933] CPU1 is up
[14071.965963] smpboot: Booting Node 0 Processor 2 APIC 0x4
[14071.968222] CPU2 is up
[14071.968248] smpboot: Booting Node 0 Processor 3 APIC 0x6
[14071.970531] CPU3 is up
[14071.970557] smpboot: Booting Node 0 Processor 4 APIC 0x1
[14071.971054] microcode: sig=0x806eb, pf=0x80, revision=0xde
[14071.971440] CPU4 is up
[14071.971469] smpboot: Booting Node 0 Processor 5 APIC 0x3
[14071.972224] CPU5 is up
[14071.972250] smpboot: Booting Node 0 Processor 6 APIC 0x5
[14071.973019] CPU6 is up
[14071.973044] smpboot: Booting Node 0 Processor 7 APIC 0x7
[14071.973835] CPU7 is up
[14071.976975] ACPI: Waking up from system sleep state S3
[14071.980628] ACPI: EC: interrupt unblocked
[14072.127187] ACPI: EC: event unblocked
[14072.239772] nvme nvme0: 8/0/0 default/read/poll queues
[14072.374447] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[14072.650048] usb 1-7: reset high-speed USB device number 5 using xhci_hcd
[14072.846461] psmouse serio1: synaptics: queried max coordinates: x [..5680], y [..4762]
[14072.876809] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1092..]
[14072.926077] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[14073.075626] acpi LNXPOWER:05: Turning OFF
[14073.075662] acpi LNXPOWER:01: Turning OFF
[14073.075736] OOM killer enabled.
[14073.075736] Restarting tasks ...
[14073.088090] nouveau 0000:01:00.0: Enabling HDA controller
[14073.116356] done.
[14073.117741] thermal thermal_zone3: failed to read out thermal zone (-61)
[14073.225723] usb 1-10: new full-speed USB device number 14 using xhci_hcd
[14073.249744] PM: suspend exit
[14073.309786] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[14073.357608] usb 1-10: device descriptor read/64, error -71
[14073.425499] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[14073.490592] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[14073.500599] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[14073.593635] usb 1-10: device descriptor read/64, error -71
[14073.829621] usb 1-10: new full-speed USB device number 15 using xhci_hcd
[14073.957723] usb 1-10: device descriptor read/64, error -71
[14074.193634] usb 1-10: device descriptor read/64, error -71
[14074.301629] usb usb1-port10: attempt power cycle
[14074.953757] usb 1-10: new full-speed USB device number 16 using xhci_hcd
[14074.954006] usb 1-10: Device not responding to setup address.
[14075.161831] usb 1-10: Device not responding to setup address.
[14075.369737] usb 1-10: device not accepting address 16, error -71
[14075.497725] usb 1-10: new full-speed USB device number 17 using xhci_hcd
[14075.497975] usb 1-10: Device not responding to setup address.
[14075.705985] usb 1-10: Device not responding to setup address.
[14075.913488] usb 1-10: device not accepting address 17, error -71
[14075.913614] usb usb1-port10: unable to enumerate USB device
[14076.915028] wlo1: authenticate with 50:d4:f7:64:41:2c
[14076.921594] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[14076.961814] wlo1: authenticated
[14076.965409] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[14076.981546] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=2)
[14076.987052] wlo1: associated
[14077.005118] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[16058.504166] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2432 MHz, width 1 (2432/0 MHz)
[16171.919895] wlo1: deauthenticating from 50:d4:f7:64:41:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[16172.033962] PM: suspend entry (deep)
[16172.039555] Filesystems sync: 0.005 seconds
[16172.041261] Freezing user space processes ... (elapsed 0.026 seconds) done.
[16172.067489] OOM killer disabled.
[16172.067490] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[16172.069513] printk: Suspending console(s) (use no_console_suspend to debug)
[16172.818163] ACPI: EC: interrupt blocked
[16172.973324] ACPI: Preparing to enter system sleep state S3
[16172.977904] ACPI: EC: event blocked
[16172.977906] ACPI: EC: EC stopped
[16172.977907] PM: Saving platform NVS memory
[16172.977994] Disabling non-boot CPUs ...
[16172.978951] IRQ 142: no longer affine to CPU1
[16172.980004] smpboot: CPU 1 is now offline
[16172.983607] IRQ 126: no longer affine to CPU2
[16172.984668] smpboot: CPU 2 is now offline
[16172.988384] IRQ 140: no longer affine to CPU3
[16172.989441] smpboot: CPU 3 is now offline
[16172.995086] smpboot: CPU 4 is now offline
[16172.998215] IRQ 124: no longer affine to CPU5
[16172.998231] IRQ 141: no longer affine to CPU5
[16172.999390] smpboot: CPU 5 is now offline
[16173.002562] IRQ 122: no longer affine to CPU6
[16173.002578] IRQ 137: no longer affine to CPU6
[16173.003682] smpboot: CPU 6 is now offline
[16173.007097] IRQ 138: no longer affine to CPU7
[16173.007106] IRQ 139: no longer affine to CPU7
[16173.008186] smpboot: CPU 7 is now offline
[16173.014845] ACPI: Low-level resume complete
[16173.014934] ACPI: EC: EC started
[16173.014935] PM: Restoring platform NVS memory
[16173.018578] Enabling non-boot CPUs ...
[16173.018639] x86: Booting SMP configuration:
[16173.018641] smpboot: Booting Node 0 Processor 1 APIC 0x2
[16173.019286] microcode: sig=0x806eb, pf=0x80, revision=0xb8
[16173.022299] CPU1 is up
[16173.022331] smpboot: Booting Node 0 Processor 2 APIC 0x4
[16173.024573] CPU2 is up
[16173.024600] smpboot: Booting Node 0 Processor 3 APIC 0x6
[16173.026882] CPU3 is up
[16173.026908] smpboot: Booting Node 0 Processor 4 APIC 0x1
[16173.027384] microcode: sig=0x806eb, pf=0x80, revision=0xde
[16173.027770] CPU4 is up
[16173.027800] smpboot: Booting Node 0 Processor 5 APIC 0x3
[16173.028543] CPU5 is up
[16173.028568] smpboot: Booting Node 0 Processor 6 APIC 0x5
[16173.029325] CPU6 is up
[16173.029352] smpboot: Booting Node 0 Processor 7 APIC 0x7
[16173.030132] CPU7 is up
[16173.033275] ACPI: Waking up from system sleep state S3
[16173.036948] ACPI: EC: interrupt unblocked
[16173.180832] ACPI: EC: event unblocked
[16173.292886] nvme nvme0: 8/0/0 default/read/poll queues
[16173.427722] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[16173.703793] usb 1-7: reset high-speed USB device number 5 using xhci_hcd
[16173.904252] psmouse serio1: synaptics: queried max coordinates: x [..5680], y [..4762]
[16173.935109] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1092..]
[16173.979451] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[16174.129580] acpi LNXPOWER:05: Turning OFF
[16174.129616] acpi LNXPOWER:01: Turning OFF
[16174.129690] OOM killer enabled.
[16174.129691] Restarting tasks ...
[16174.136010] nouveau 0000:01:00.0: Enabling HDA controller
[16174.146034] done.
[16174.146561] thermal thermal_zone3: failed to read out thermal zone (-61)
[16174.271257] PM: suspend exit
[16174.275134] usb 1-10: new full-speed USB device number 18 using xhci_hcd
[16174.297927] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[16174.403230] usb 1-10: device descriptor read/64, error -71
[16174.424229] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[16174.489189] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[16174.500943] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[16174.643336] usb 1-10: device descriptor read/64, error -71
[16174.879238] usb 1-10: new full-speed USB device number 19 using xhci_hcd
[16175.007272] usb 1-10: device descriptor read/64, error -71
[16175.243541] usb 1-10: device descriptor read/64, error -71
[16175.351514] usb usb1-port10: attempt power cycle
[16176.003422] usb 1-10: new full-speed USB device number 20 using xhci_hcd
[16176.003675] usb 1-10: Device not responding to setup address.
[16176.211588] usb 1-10: Device not responding to setup address.
[16176.419221] usb 1-10: device not accepting address 20, error -71
[16176.547154] usb 1-10: new full-speed USB device number 21 using xhci_hcd
[16176.547406] usb 1-10: Device not responding to setup address.
[16176.755577] usb 1-10: Device not responding to setup address.
[16176.963422] usb 1-10: device not accepting address 21, error -71
[16176.963541] usb usb1-port10: unable to enumerate USB device
[16178.059068] wlo1: authenticate with 50:d4:f7:64:41:2c
[16178.066371] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[16178.107119] wlo1: authenticated
[16178.111211] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[16178.125269] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=1)
[16178.135336] wlo1: associated
[16178.153382] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[16359.991808] wlo1: AP 50:d4:f7:64:41:2c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
[17489.455285] nouveau 0000:01:00.0: Enabling HDA controller
[17523.375116] nouveau 0000:01:00.0: Enabling HDA controller
[18486.981420] ACPI Error: No handler for Region [VRTC] (00000000008209e7) [SystemCMOS] (20190816/evregion-127)
[18486.981426] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exfldio-261)
[18486.981432] No Local Variables are initialized for Method [_Q9A]
[18486.981433] No Arguments are initialized for method [_Q9A]
[18486.981435] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20190816/psparse-529)
[18510.725242] mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 154)
[18510.725243] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 154)
[18510.725244] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725245] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725245] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725246] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725276] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725277] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725278] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.725278] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 326)
[18510.745208] mce: CPU6: Core temperature/speed normal
[18510.745209] mce: CPU5: Package temperature/speed normal
[18510.745210] mce: CPU3: Package temperature/speed normal
[18510.745211] mce: CPU2: Core temperature/speed normal
[18510.745212] mce: CPU1: Package temperature/speed normal
[18510.745213] mce: CPU7: Package temperature/speed normal
[18510.745214] mce: CPU0: Package temperature/speed normal
[18510.745214] mce: CPU4: Package temperature/speed normal
[18510.745215] mce: CPU2: Package temperature/speed normal
[18510.745216] mce: CPU6: Package temperature/speed normal
[19114.396542] nouveau 0000:01:00.0: Enabling HDA controller
[19122.268738] nouveau 0000:01:00.0: Enabling HDA controller

 

 

Értékelés: 

0
Még nincs értékelve

Először is nagyon köszönöm a

#9 No, akkor irány egy szervíz, mert vagy állandó túlmelegedés van, vagy lehet hibás a proci. Jó esetben csak újra kell pasztázni. Ez a legfontosabb.

Azután rátérhetünk a többire.

(Secure boot kikapcsolása, initframs tömöritési gond megoldása)

Értékelés: 

0
Még nincs értékelve

Először is nagyon köszönöm a

#10 Köszönöm! Ez problémás, mert 1000 km-re vagyok a garancia helyétől, de akkor kénytelen leszek. Az initramfs problémát megoldottam, a secure boot nem volt bekapcsolva. A hibaüzenetek egy része eltűnt a dmesg kimenetéből, egyelőre újra működik a bluetooth, de több hibaüzenet van vele kapcsolatban:

 

    5.583569] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    5.648903] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[    5.657817] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[    6.255855] Bluetooth: hci0: Waiting for firmware download to complete
[    6.256649] Bluetooth: hci0: Firmware loaded in 1451206 usecs
[    6.256747] Bluetooth: hci0: Waiting for device to boot
[    6.269667] Bluetooth: hci0: Device booted in 12666 usecs
[    6.270076] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[    6.272705] Bluetooth: hci0: Applying Intel DDC parameters completed
[    6.344264] NET: Registered protocol family 38
[    7.148202] Bluetooth: RFCOMM TTY layer initialized
[    7.148208] Bluetooth: RFCOMM socket layer initialized
[    7.148211] Bluetooth: RFCOMM ver 1.11
[    9.226968] wlo1: authenticate with 50:d4:f7:64:41:2c
[    9.235730] wlo1: send auth to 50:d4:f7:64:41:2c (try 1/3)
[    9.275799] wlo1: authenticated
[    9.276760] wlo1: associate with 50:d4:f7:64:41:2c (try 1/3)
[    9.294402] wlo1: RX AssocResp from 50:d4:f7:64:41:2c (capab=0x411 status=0 aid=2)
[    9.300339] wlo1: associated
[    9.349518] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   64.908753] Bluetooth: hci0: HCI reset during shutdown failed
[   66.166781] debugfs: File 'le_min_key_size' in directory 'hci0' already present!
[   66.166791] debugfs: File 'le_max_key_size' in directory 'hci0' already present!
[  191.048268] ACPI Error: No handler for Region [VRTC] (00000000b5f0d040) [SystemCMOS] (20190816/evregion-127)
[  191.048281] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exfldio-261)
[  191.048299] No Local Variables are initialized for Method [_Q9A]
[  191.048302] No Arguments are initialized for method [_Q9A]
[  191.048306] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q9A due to previous error (AE_NOT_EXIST) (20190816/psparse-529)
[  378.045058] input: SRS-XB12 (AVRCP) as /devices/virtual/input/input19
martin@martin-PS42-Modern-8RA:~$

 

Értékelés: 

0
Még nincs értékelve

Először is nagyon köszönöm a

#11 Miért, ez még garanciális? Egyébként könnyen lehet hogy nem érvényesitik, mert ez a gép Windowsal volt kiadva. Elmondod, hogy hibákat mutat a Linuix, elhajtanak a pi..ba.

Közelebb nincs szervíz? Olyan kis cég, ahol használt notikat árulnak jellemzően nagyáruház bérelt helyén, nincs? Azok foglakoznak notikkal is. Meg kellene oldani a proci ügyet, mert egy csomó hiba lehet hogy ezért jelenik meg. Ha az megoldódik, attól lehet, hogy sok olyan is megoldódik, amikkel most lehetne foglalkozni, patkolgatni, de minek energiát fektetni bele, hiszen a proci a fő gond, a szó szoros értelmében fő.

Értékelés: 

0
Még nincs értékelve
Koppány képe

Először is nagyon köszönöm a

#12 Emlékszem, valamelyik fórumtársunknak főtt a procija, de ott nem hardveres gond volt. Nem találom a témát, de úgyemlékszem, hogy volt megoldás.

Értékelés: 

0
Még nincs értékelve

Először is nagyon köszönöm a

#13 Ott csak fájlrendszer sérülés volt, és magas CPU használat. Itt viszont az látszik, hogy a CPU le van skálázva, mert folyamatosan túlmelegedik. És szívja is valami a tápot rendesen, az USB-s hibaüzenetek erről szólnak. Az is lehet, hogy a kábelek csatlakozásával is gond van a gépen belül. Venti megy egyáltalán?

Mindenképpen ajánlott szervizben megnézetni belülről, ez a gép nagyon beteg.

Értékelés: 

0
Még nincs értékelve

Először is nagyon köszönöm a

#14 Kívülről úgy néz ki, mintha 2 nagyobb ventillátor lenne benne, de egyértelműen csak egy forog. Eddig nem tűnt fel, mert normál használat mellett szinte hangtalan. A bluetooth viszont most 3 órája működik, mióta az initramfs-t megmókoltam. Úgy néz ki tényleg a venti lesz a gond. Nagyon köszönöm!

Értékelés: 

0
Még nincs értékelve
kimarite képe

Bluetooth: hci0: HCI reset during shutdown failed

#11 Ha ezeket futtatod, megjavul - hosszú időre (*)?

sudo hciconfig hci0 down
sudo modprobe -r btusb
sudo modprobe btusb
sudo hciconfig hci0 up

#15 jó ...mióta az initramfs-t megmókoltam

Ez mi volt pontosan?

Értékelés: 

0
Még nincs értékelve

Bluetooth: hci0: HCI reset during shutdown failed

#16 Az initramfs hibaüzenetnél ezt csináltam végig:

https://forums.linuxmint.com/viewtopic.php?t=323152

martin@martin-PS42-Modern-8RA:~$ sudo hciconfig hci0 up
Can't get device info: No such device

Mielőtt lefuttattam, volt bluetooth, most ez a parancs nem kapcsolja vissza.

 

Értékelés: 

0
Még nincs értékelve
kimarite képe

Bluetooth: hci0: HCI reset during shutdown failed

#17 Az initramfs hibaüzenetnél ezt csináltam végig:

A módszert valahol T.István is leírta. Kösz

martin@martin-PS42-Modern-8RA:~$ sudo hciconfig hci0 up
Can't get device info: No such device

Mielőtt lefuttattam, volt bluetooth, most ez a parancs nem kapcsolja vissza.

Ebédnél is az utolsó fogással kezdesz? :)
4 parancssor: sorban kéne... (fentről lefelé).
Az izraeliek olvassák jobbról balra a szöveget. :)

Értékelés: 

0
Még nincs értékelve
kimarite képe

Bluetooth: hci0: HCI reset during shutdown failed

#18 Az eszköz nevének listázása (hci0, hci1, stb.):

hciconfig list

Azt hiszem, de nincs ilyen eszközöm.

Értékelés: 

0
Még nincs értékelve

Bluetooth: hci0: HCI reset during shutdown failed

#18 Végigcsináltam a parancsokat sorban, nyilván nem csak az utolsót. Az elsővel leválasztotta, a többit minden megjegyzés nélkül megcsinálta, azt itolsónál meg a bemásolt hibaüzenetet adta ki. Nem tudom, ebből hogyan következik, hogy csak azt csináltam meg.:)

Értékelés: 

0
Még nincs értékelve

Bluetooth: hci0: HCI reset during shutdown failed

#18 A pastebint jegyeztem, legközelebb azt használom.

Értékelés: 

0
Még nincs értékelve

Bluetooth: hci0: HCI reset during shutdown failed

#21 Szerviz, szervíz, szervíz. Vagy valaki, ha más nem. Szét kell szedni, kisöpörni a port, pasztázni, esetleg BT/Wifi modul csatlakozóit tisztítani, meg amit még lehet, csatlakozókat, kis szalagkábelek kontakjait. Amíg nincs hardveresen rendben, addig nem fog rendesen működni.

Értékelés: 

0
Még nincs értékelve

Bluetooth: hci0: HCI reset during shutdown failed

#22 Ezt már akkor tudomásul vettem, amikor megállapítottuk, hogy nem működik a fél hűtés. Nem is számítok rá, hogy csak szoftveresen megjavuljon.

Értékelés: 

0
Még nincs értékelve
kimarite képe

Bluetooth: hci0: HCI reset during shutdown failed

#20 Nem tudom, ebből hogyan következik, hogy csak azt csináltam meg.:)

Láttunk már hasonlót bőven (és mi is voltunk kezdők) ;)
Hibaüzenet volt az első három parancssornál? Célszerű pastebinre tenni az összeset (máskor).

A kimenetben a hci0 szerepel? Ezt mutattam a parancssorokban. Ha nem ez szerepel, be kell helyettesíteni.

hciconfig list

Ahogy látom, más gond is van. Sok sikert!

Értékelés: 

0
Még nincs értékelve

Bluetooth: hci0: HCI reset during shutdown failed

#24 Az első 3 parancsnál nem volt hibaüzenet, csak amikor az utolsóval vissza kellett kapcsolni, akkor nem talált eszközt. Az első parancsot követően eltűnt a tálcáról a bluetooth ikon. De hci0-ként ismeri fel a "hciconfig list" paranccsal.

Értékelés: 

0
Még nincs értékelve
kimarite képe

Bluetooth: hci0: HCI reset during shutdown failed

#25 Fura mindesetre.

Értékelés: 

0
Még nincs értékelve