Linux Mint 18.3 KDE képernyőkímélő rendellenesen működik

Sturcz Sándor képe

Fórum: 

Tisztelt tagok!

Asus K50IN típusú laptopon fenti verzió 2percen belül, ha nincs mozgatva a kurzor elsötétül a képernyő és ujabb mozgatásra csak a kurzort jelenití meg, amely mogatására sem jelenik meg a képernyő. Kélek benneteket hogy segítsetek.

Köszönöm előre is Sturcz Sándor.

Sturcz Sándor képe

Képernyőkímélő rendellenes müködése

Tisztelt Kimarite!

1 hónapja használom. Alkalmazások müködnek. Nekem az Ubuntu Pastebint telepiteni sok idő. Kérlek adj egy kis tanulóidőt.

Nagyon szépen köszönöm

Sturcz Sanyi.

Értékelés: 

0
Még nincs értékelve
Sturcz Sándor képe

kimenet

sturcz@sturcz-K50IN ~ $ inxi -z
CPU~Dual core Pentium T4300 (-MCP-) speed/max~1200/2100 MHz Kernel~4.10.0-38-generic x86_64 Up~3 min Mem~445.4/3005.8MB HDD~250.1GB(7.4% used) Procs~156 Client~Shell inxi~2.2.35  
sturcz@sturcz-K50IN ~ $ inxi -Fz
System:    Host: sturcz-K50IN Kernel: 4.10.0-38-generic x86_64 (64 bit)
           Desktop: KDE Plasma 5.8.8 Distro: Linux Mint 18.3 Sylvia
Machine:   System: ASUSTeK (portable) product: K50IN v: 1.0
           Mobo: ASUSTeK model: K50IN v: 1.0
           Bios: American Megatrends v: 217 date: 08/26/2009
CPU:       Dual core Pentium T4300 (-MCP-) cache: 1024 KB
           clock speeds: max: 2100 MHz 1: 1600 MHz 2: 1600 MHz
Graphics:  Card: NVIDIA C79 [GeForce G102M]
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.05hz
           GLX Renderer: Gallium 0.4 on NVAC GLX Version: 3.0 Mesa 17.0.7
Audio:     Card NVIDIA MCP79 High Definition Audio driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp3s0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
           driver: ath9k
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 250.1GB (7.4% used)
           ID-1: /dev/sda model: Hitachi_HTS54322 size: 250.1GB
Partition: ID-1: / size: 29G used: 15G (55%) fs: ext4 dev: /dev/sda9
           ID-2: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 48.0C mobo: N/A gpu: 53.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 151 Uptime: 5 min Memory: 444.7/3005.8MB
           Client: Shell (bash) inxi: 2.2.35
sturcz@sturcz-K50IN ~ $ demsg
Nem található „demsg” nevű parancs, talán erre gondolt:
 „dmesg” parancs a(z) „util-linux” (main) csomagból
demsg: a parancs nem található
sturcz@sturcz-K50IN ~ $ dmesg
[    0.000000] Linux version 4.10.0-38-generic (buildd@lgw01-amd64-059) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #42~16.04.1-Ubuntu SMP Tue Oct 10 16:32:20 UTC 2017 (Ubuntu 4.10.0-38.42~16.04.1-generic 4.10.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=a1d4ba4c-6455-4461-b88c-005d06c92b5f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffa7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa8000-0x00000000bffaffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbfeff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffbff00-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff700000-0x000000011fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ASUSTeK Computer Inc.  K50IN                /K50IN      , BIOS 217     08/26/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbffa8 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9a93400ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9a9340098000] 98000 size 24576
[    0.000000] BRK [0x5ee28000, 0x5ee28fff] PGTABLE
[    0.000000] BRK [0x5ee29000, 0x5ee29fff] PGTABLE
[    0.000000] BRK [0x5ee2a000, 0x5ee2afff] PGTABLE
[    0.000000] BRK [0x5ee2b000, 0x5ee2bfff] PGTABLE
[    0.000000] BRK [0x5ee2c000, 0x5ee2cfff] PGTABLE
[    0.000000] BRK [0x5ee2d000, 0x5ee2dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32b32000-0x35590fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA180 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000BFFB0100 00007C (v01 _ASUS_ Notebook 20090826 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFB0290 0000F4 (v03 082609 FACP1156 20090826 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFB06F0 00CCAD (v01 K50IN  K50IN000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFBFF00 000040
[    0.000000] ACPI: FACS 0x00000000BFFBFF00 000040
[    0.000000] ACPI: APIC 0x00000000BFFB0390 000080 (v01 082609 APIC1156 20090826 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFB0450 00003C (v01 082609 OEMMCFG  20090826 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BFFB0490 000176 (v01 _ASUS_ Notebook 20090826 MSFT 00000097)
[    0.000000] ACPI: WDRT 0x00000000BFFB0610 000047 (v01 082609 NV-WDRT  20090826 MSFT 00000097)
[    0.000000] ACPI: ECDT 0x00000000BFFB0690 000054 (v01 082609 OEMECDT  20090826 MSFT 00000097)
[    0.000000] ACPI: DBGP 0x00000000BFFB0410 000034 (v01 082609 DBGP1156 20090826 MSFT 00000097)
[    0.000000] ACPI: BOOT 0x00000000BFFB0660 000028 (v01 082609 BOOT1156 20090826 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFBFF40 000078 (v01 082609 OEMB1156 20090826 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BFFBF6F0 000038 (v01 082609 OEMHPET0 20090826 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BFFC0D30 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffa7fff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbff7d000-0xbffa7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bffa7fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffa7fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffa7fff]
[    0.000000] On node 0 totalpages: 786245
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782248 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9a93ffa00000 s107992 r8192 d31272 u524288
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773937
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=a1d4ba4c-6455-4461-b88c-005d06c92b5f ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3030856K/3144980K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 114124K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2099.931 MHz processor
[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.86 BogoMIPS (lpj=8399724)
[    0.004024] pid_max: default: 32768 minimum: 301
[    0.004045] ACPI: Core revision 20160930
[    0.026583] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.026651] Security Framework initialized
[    0.026653] Yama: becoming mindful.
[    0.026684] AppArmor: AppArmor initialized
[    0.027306] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029970] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031253] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031264] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031864] CPU: Physical Processor ID: 0
[    0.031866] CPU: Processor Core ID: 0
[    0.031869] mce: CPU supports 6 MCE banks
[    0.031881] CPU0: Thermal monitoring enabled (TM2)
[    0.031886] process: using mwait in idle threads
[    0.031893] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.031894] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.032213] Freeing SMP alternatives memory: 32K
[    0.036014] ftrace: allocating 34229 entries in 134 pages
[    0.056208] smpboot: Max logical packages: 2
[    0.056712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.100000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.100000] ... version:                2
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      2
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             000000007fffffff
[    0.100000] ... fixed-purpose events:   3
[    0.100000] ... event mask:             0000000700000003
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] smp: Bringing up secondary CPUs ...
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.100097] smp: Brought up 1 node, 2 CPUs
[    0.100097] smpboot: Total of 2 processors activated (8399.72 BogoMIPS)
[    0.101780] devtmpfs: initialized
[    0.101780] x86/mm: Memory block size: 128MB
[    0.108419] evm: security.selinux
[    0.108421] evm: security.SMACK64
[    0.108422] evm: security.SMACK64EXEC
[    0.108423] evm: security.SMACK64TRANSMUTE
[    0.108424] evm: security.SMACK64MMAP
[    0.108425] evm: security.ima
[    0.108427] evm: security.capability
[    0.108564] PM: Registering ACPI NVS region [mem 0xbffa8000-0xbffaffff] (32768 bytes)
[    0.108567] PM: Registering ACPI NVS region [mem 0xbffbff00-0xbffeffff] (196864 bytes)
[    0.108691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108710] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.108792] pinctrl core: initialized pinctrl subsystem
[    0.109061] RTC time: 18:56:39, date: 01/23/20
[    0.109253] NET: Registered protocol family 16
[    0.120008] cpuidle: using governor ladder
[    0.132006] cpuidle: using governor menu
[    0.132010] PCCT header not found.
[    0.132078] Simple Boot Flag at 0xef set to 0x1
[    0.132097] ACPI: bus type PCI registered
[    0.132100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.132238] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[    0.132241] PCI: not using MMCONFIG
[    0.132243] PCI: Using configuration type 1 for base access
[    0.132301] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.132301] mtrr: probably your BIOS does not setup all CPUs.
[    0.132301] mtrr: corrected configuration.
[    0.144080] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.144162] ACPI: Added _OSI(Module Device)
[    0.144164] ACPI: Added _OSI(Processor Device)
[    0.144166] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.144167] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144173] ACPI : EC: EC started
[    0.144175] ACPI : EC: interrupt blocked
[    0.146019] ACPI: \: Used as first EC
[    0.146022] ACPI: \: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.146025] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.148049] ACPI: Executed 1 blocks of module-level executable AML code
[    0.155565] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.156519] ACPI: Dynamic OEM Table Load:
[    0.156531] ACPI: SSDT 0xFFFF9A93FB9E7800 000206 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.156975] ACPI: Dynamic OEM Table Load:
[    0.156987] ACPI: SSDT 0xFFFF9A93FB9F3800 0007FB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.157819] ACPI: Dynamic OEM Table Load:
[    0.157828] ACPI: SSDT 0xFFFF9A93FB9BD900 0000CC (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.158115] ACPI: Dynamic OEM Table Load:
[    0.158124] ACPI: SSDT 0xFFFF9A93FB9CE300 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.159172] ACPI : EC: EC stopped
[    0.159174] ACPI : EC: EC started
[    0.159175] ACPI : EC: interrupt blocked
[    0.160224] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.160228] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.160231] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.160232] ACPI: Interpreter enabled
[    0.160276] ACPI: (supports S0 S3 S4 S5)
[    0.160278] ACPI: Using IOAPIC for interrupt routing
[    0.160340] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[    0.162180] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[    0.162199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.179801] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.179812] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.180202] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[    0.180375] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.180379] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.180382] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[    0.180385] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.180415] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
[    0.180885] PCI host bridge to bus 0000:00
[    0.180889] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.180892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.180895] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.180897] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.180900] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff window]
[    0.180903] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfebfffff window]
[    0.180906] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.180927] pci 0000:00:00.0: [10de:0a83] type 00 class 0x060000
[    0.181177] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
[    0.181430] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
[    0.181445] pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.181633] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
[    0.181840] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
[    0.181858] pci 0000:00:03.2: reg 0x10: [io  0x4900-0x493f]
[    0.181889] pci 0000:00:03.2: reg 0x20: [io  0x4d00-0x4d3f]
[    0.181899] pci 0000:00:03.2: reg 0x24: [io  0x4e00-0x4e3f]
[    0.181948] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.182020] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.182109] pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
[    0.182362] pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
[    0.182387] pci 0000:00:03.5: reg 0x10: [mem 0xfae80000-0xfaefffff]
[    0.182645] pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
[    0.182662] pci 0000:00:04.0: reg 0x10: [mem 0xfae7f000-0xfae7ffff]
[    0.182738] pci 0000:00:04.0: supports D1 D2
[    0.182741] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.182813] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.182904] pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
[    0.182922] pci 0000:00:04.1: reg 0x10: [mem 0xfae7ec00-0xfae7ecff]
[    0.183006] pci 0000:00:04.1: supports D1 D2
[    0.183008] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183077] pci 0000:00:04.1: System wakeup disabled by ACPI
[    0.183175] pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
[    0.183192] pci 0000:00:08.0: reg 0x10: [mem 0xfae78000-0xfae7bfff]
[    0.183268] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.183336] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.183420] pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
[    0.183534] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.183625] pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
[    0.183642] pci 0000:00:0b.0: reg 0x10: [io  0xc080-0xc087]
[    0.183651] pci 0000:00:0b.0: reg 0x14: [io  0xc000-0xc003]
[    0.183660] pci 0000:00:0b.0: reg 0x18: [io  0xbc00-0xbc07]
[    0.183669] pci 0000:00:0b.0: reg 0x1c: [io  0xb880-0xb883]
[    0.183678] pci 0000:00:0b.0: reg 0x20: [io  0xb800-0xb80f]
[    0.183687] pci 0000:00:0b.0: reg 0x24: [mem 0xfae7c000-0xfae7dfff]
[    0.183871] pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
[    0.183938] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184135] pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
[    0.184380] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184480] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.184600] pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
[    0.184842] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184941] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.185133] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[    0.185143] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.185146] pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.185149] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.185152] pci 0000:00:09.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.185155] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xfbffffff window] (subtractive decode)
[    0.185158] pci 0000:00:09.0:   bridge window [mem 0xfe000000-0xfebfffff window] (subtractive decode)
[    0.185249] pci 0000:02:00.0: [10de:0873] type 00 class 0x030000
[    0.185269] pci 0000:02:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.185285] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.185299] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[    0.185309] pci 0000:02:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.185321] pci 0000:02:00.0: reg 0x30: [mem 0xfafe0000-0xfaffffff pref]
[    0.185488] pci 0000:00:10.0: PCI bridge to [bus 02]
[    0.185495] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.185499] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.185505] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.185654] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.185677] pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.185711] pci 0000:03:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
[    0.185749] pci 0000:03:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[    0.185853] pci 0000:03:00.0: supports D1 D2
[    0.185856] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.185965] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.185981] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.185997] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.186007] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.186170] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[    0.186198] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[    0.186332] pci 0000:04:00.0: supports D1
[    0.186335] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.196033] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.196056] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.197570] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.197778] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.197984] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.198187] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.198392] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[    0.198595] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.198798] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.199002] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.199205] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.199409] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.199613] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.199817] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.200034] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.200241] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.200445] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.200650] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.200858] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *9
[    0.201061] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.201267] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.201471] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.201678] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[    0.201882] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.202086] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.202291] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.202495] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.202704] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.202909] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.203112] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.203316] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.203520] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.203724] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.203928] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.204149] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
[    0.204362] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.204565] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.204772] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.204977] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *9
[    0.205183] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
[    0.205394] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
[    0.205604] ACPI: PCI Interrupt Link [LSA0] (IRQs *5)
[    0.205833] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.206035] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.206237] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.206441] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
[    0.206645] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.206848] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.207056] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
[    0.207268] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
[    0.207477] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[    0.207682] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[    0.208229] ACPI : EC: interrupt unblocked
[    0.208242] ACPI : EC: event unblocked
[    0.208275] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.208278] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.209073] SCSI subsystem initialized
[    0.209098] libata version 3.00 loaded.
[    0.209098] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.209098] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.209098] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.209098] vgaarb: loaded
[    0.209098] ACPI: bus type USB registered
[    0.209098] usbcore: registered new interface driver usbfs
[    0.209098] usbcore: registered new interface driver hub
[    0.209098] usbcore: registered new device driver usb
[    0.209098] PCI: Using ACPI for IRQ routing
[    0.209098] PCI: pci_cache_line_size set to 64 bytes
[    0.209181] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.209184] e820: reserve RAM buffer [mem 0xbffa8000-0xbfffffff]
[    0.209403] NetLabel: Initializing
[    0.209405] NetLabel:  domain hash size = 128
[    0.209406] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.209442] NetLabel:  unlabeled traffic allowed by default
[    0.209487] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.209487] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.209487] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.212032] clocksource: Switched to clocksource hpet
[    0.233374] VFS: Disk quotas dquot_6.6.0
[    0.233418] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.233662] AppArmor: AppArmor Filesystem Enabled
[    0.233775] pnp: PnP ACPI init
[    0.234029] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.234171] pnp 00:01: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.234878] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.234882] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.234886] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.234889] system 00:02: [io  0x4080-0x40ff] has been reserved
[    0.234893] system 00:02: [io  0x4400-0x447f] has been reserved
[    0.234896] system 00:02: [io  0x4480-0x44ff] has been reserved
[    0.234899] system 00:02: [io  0x4800-0x487f] has been reserved
[    0.234903] system 00:02: [io  0x4880-0x48ff] has been reserved
[    0.234907] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.234910] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.234914] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[    0.234923] system 00:02: [mem 0xfefe2000-0xfefe3fff] has been reserved
[    0.234926] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.234930] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.234933] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.234940] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235089] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.235242] system 00:04: [io  0x0250-0x0253] has been reserved
[    0.235246] system 00:04: [io  0x0256-0x025f] has been reserved
[    0.235250] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.235254] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.235260] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235401] system 00:05: [io  0x0260-0x026f] has been reserved
[    0.235407] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235549] system 00:06: [io  0x5000-0x507f] has been reserved
[    0.235553] system 00:06: [io  0x5080-0x50ff] has been reserved
[    0.235558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235726] system 00:07: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.235732] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236201] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.236204] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.236208] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.236211] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.236215] system 00:08: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.236221] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.237671] pnp: PnP ACPI: found 9 devices
[    0.246567] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.246643] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.246658] pci 0000:00:10.0: PCI bridge to [bus 02]
[    0.246662] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.246668] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.246673] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.246680] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.246686] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.246698] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.246719] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.246731] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.246754] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.246757] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.246760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246763] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.246766] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfbffffff window]
[    0.246769] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.246772] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.246775] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.246778] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246781] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.246784] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xfbffffff window]
[    0.246787] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.246790] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.246793] pci_bus 0000:02: resource 1 [mem 0xfaf00000-0xfbffffff]
[    0.246795] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.246798] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.246801] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.246804] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.246985] NET: Registered protocol family 2
[    0.247335] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.247505] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.247707] TCP: Hash tables configured (established 32768 bind 32768)
[    0.247795] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.247833] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.247994] NET: Registered protocol family 1
[    0.248578] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.308515] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.308741] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.308752] PCI: CLS 64 bytes, default 64
[    0.308859] Unpacking initramfs...
[    1.836813] Freeing initrd memory: 43388K
[    1.837194] Scanning for low memory corruption every 60 seconds
[    1.837853] audit: initializing netlink subsys (disabled)
[    1.837978] audit: type=2000 audit(1579805800.836:1): initialized
[    1.838666] Initialise system trusted keyrings
[    1.838825] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.842937] zbud: loaded
[    1.844057] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.844562] fuse init (API version 7.26)
[    1.847062] Key type asymmetric registered
[    1.847066] Asymmetric key parser 'x509' registered
[    1.847167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.847226] io scheduler noop registered
[    1.847228] io scheduler deadline registered
[    1.847247] io scheduler cfq registered (default)
[    1.847953] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 21
[    1.848521] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 20
[    1.848798] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.848799] vesafb: scrolling: redraw
[    1.848802] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.848825] vesafb: framebuffer at 0xf9000000, mapped to 0xffffbf0000c00000, using 1216k, total 1216k
[    1.849015] Console: switching to colour frame buffer device 80x30
[    1.849039] fb0: VESA VGA frame buffer device
[    1.849069] intel_idle: does not run on family 6 model 23
[    1.849268] ACPI: AC Adapter [AC0] (off-line)
[    1.849453] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.849458] ACPI: Power Button [PWRB]
[    1.849544] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.849554] ACPI: Sleep Button [SLPB]
[    1.850941] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.850948] ACPI: Lid Switch [LID]
[    1.851037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.851040] ACPI: Power Button [PWRF]
[    1.851891] Monitor-Mwait will be used to enter C-1 state
[    1.851907] Monitor-Mwait will be used to enter C-2 state
[    1.851921] Monitor-Mwait will be used to enter C-3 state
[    1.851932] tsc: Marking TSC unstable due to TSC halts in idle
[    1.854894] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.855346] thermal LNXTHERM:00: registered as thermal_zone0
[    1.855349] ACPI: Thermal Zone [THRM] (36 C)
[    1.855671] GHES: HEST is not enabled!
[    1.856110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.860588] Linux agpgart interface v0.103
[    1.864662] loop: module loaded
[    1.865104] libphy: Fixed MDIO Bus: probed
[    1.865106] tun: Universal TUN/TAP device driver, 1.6
[    1.865108] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.865235] PPP generic driver version 2.4.2
[    1.865336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.865342] ehci-pci: EHCI PCI platform driver
[    1.865591] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.865603] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.865617] ehci-pci 0000:00:04.1: debug port 1
[    1.865672] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.865699] ehci-pci 0000:00:04.1: irq 22, io mem 0xfae7ec00
[    1.875463] random: fast init done
[    1.880038] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.880150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.880154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.880157] usb usb1: Product: EHCI Host Controller
[    1.880160] usb usb1: Manufacturer: Linux 4.10.0-38-generic ehci_hcd
[    1.880162] usb usb1: SerialNumber: 0000:00:04.1
[    1.880430] hub 1-0:1.0: USB hub found
[    1.880446] hub 1-0:1.0: 8 ports detected
[    1.883175] ehci-platform: EHCI generic platform driver
[    1.883210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.883218] ohci-pci: OHCI PCI platform driver
[    1.883393] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.883403] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.883443] ohci-pci 0000:00:04.0: irq 23, io mem 0xfae7f000
[    1.890496] ACPI: Battery Slot [BAT0] (battery present)
[    1.942092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.942096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.942099] usb usb2: Product: OHCI PCI host controller
[    1.942102] usb usb2: Manufacturer: Linux 4.10.0-38-generic ohci_hcd
[    1.942105] usb usb2: SerialNumber: 0000:00:04.0
[    1.942374] hub 2-0:1.0: USB hub found
[    1.942388] hub 2-0:1.0: 8 ports detected
[    1.945092] ohci-platform: OHCI generic platform driver
[    1.945119] uhci_hcd: USB Universal Host Controller Interface driver
[    1.945262] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.948793] i8042: Detected active multiplexing controller, rev 1.1
[    1.951212] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.951221] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.951297] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.951363] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.951428] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.951751] mousedev: PS/2 mouse device common for all mice
[    1.952292] rtc_cmos 00:03: RTC can wake from S4
[    1.952629] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.952685] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.952700] i2c /dev entries driver
[    1.952826] device-mapper: uevent: version 1.0.3
[    1.953037] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.953093] ledtrig-cpu: registered to indicate activity on CPUs
[    1.953728] NET: Registered protocol family 10
[    1.962355] Segment Routing with IPv6
[    1.962395] NET: Registered protocol family 17
[    1.962416] Key type dns_resolver registered
[    1.962864] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[    1.962959] microcode: Microcode Update Driver: v2.2.
[    1.963278] registered taskstats version 1
[    1.963299] Loading compiled-in X.509 certificates
[    1.969435] Loaded X.509 cert 'Build time autogenerated kernel key: 0e953fd717aa51b8d9e0128dd1af1f8370b86949'
[    1.969482] zswap: loaded using pool lzo/zbud
[    1.973702] Key type big_key registered
[    1.973709] Key type trusted registered
[    1.977593] Key type encrypted registered
[    1.977600] AppArmor: AppArmor sha1 policy hashing enabled
[    1.977605] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.977657] evm: HMAC attrs: 0x1
[    1.978061]   Magic number: 4:498:949
[    1.978087] mdio_bus fixed-0: hash matches
[    1.978138] tty tty6: hash matches
[    1.978213] memory memory2: hash matches
[    1.978331] rtc_cmos 00:03: setting system clock to 2020-01-23 18:56:41 UTC (1579805801)
[    1.979626] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.979627] EDD information not available.
[    1.979676] PM: Hibernation image not present or could not be loaded.
[    1.983042] Freeing unused kernel memory: 2228K
[    1.983045] Write protecting the kernel read-only data: 14336k
[    1.984324] Freeing unused kernel memory: 1156K
[    1.985367] Freeing unused kernel memory: 268K
[    1.996330] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.996563] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.092305] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    2.095415] wmi: Mapper loaded
[    2.105902] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.119719] ahci 0000:00:0b.0: version 3.0
[    2.119995] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 5
[    2.120117] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    2.120227] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.120230] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[    2.120789] scsi host0: ahci
[    2.120968] scsi host1: ahci
[    2.121041] ata1: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c100 irq 24
[    2.121043] ata2: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c180 irq 24
[    2.129448] [drm] Initialized
[    2.129611] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.129633] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.129925] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    2.130352] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffbf0000671000, 90:e6:ba:1f:ed:67, XID 18000000 IRQ 25
[    2.130354] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    2.175397] acpi device:23: registered as cooling_device2
[    2.180327] acpi device:24: registered as cooling_device3
[    2.180428] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:00/input/input9
[    2.201593] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.216378] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.218556] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[    2.218646] checking generic (f9000000 130000) vs hw (e0000000 10000000)
[    2.218647] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[    2.218648] fb: switching to nouveaufb from VESA VGA
[    2.218684] Console: switching to colour dummy device 80x25
[    2.218914] nouveau 0000:02:00.0: NVIDIA MCP79/MCP7A (0ac980b1)
[    2.234300] nouveau 0000:02:00.0: bios: version 62.79.71.00.01
[    2.255574] nouveau 0000:02:00.0: fb: 512 MiB stolen system memory
[    2.311676] [TTM] Zone  kernel: Available graphics memory: 1538964 kiB
[    2.311677] [TTM] Initializing pool allocator
[    2.311684] [TTM] Initializing DMA pool allocator
[    2.311706] nouveau 0000:02:00.0: DRM: VRAM: 512 MiB
[    2.311707] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[    2.311712] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[    2.311714] nouveau 0000:02:00.0: DRM: DCB version 4.0
[    2.311716] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000323 00010034
[    2.311719] nouveau 0000:02:00.0: DRM: DCB outp 01: 02011300 0000001e
[    2.311721] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[    2.311723] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[    2.316351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.316352] [drm] Driver supports precise vblank timestamp query.
[    2.316457] nouveau 0000:02:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.327150] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[    2.373906] nouveau 0000:02:00.0: DRM: allocated 1366x768 fb: 0x50000, bo ffff9a9375392800
[    2.376564] fbcon: nouveaufb (fb0) is primary device
[    2.376735] Console: switching to colour frame buffer device 170x48
[    2.376770] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[    2.408052] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[    2.408224] usb 1-5: New USB device found, idVendor=04f2, idProduct=b071
[    2.408226] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.408228] usb 1-5: Product: CNF7129
[    2.408230] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
[    2.408231] usb 1-5: SerialNumber: SN0001
[    2.436962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.436982] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.439503] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LC01, max UDMA/100
[    2.442501] ata2.00: configured for UDMA/100
[    2.445177] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[    2.445179] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.446558] ata1.00: configured for UDMA/133
[    2.446807] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 C40C PQ: 0 ANSI: 5
[    2.476282] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.476446] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.476465] sd 0:0:0:0: [sda] Write Protect is off
[    2.476467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.476493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.478535] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LC01 PQ: 0 ANSI: 5
[    2.503743] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.503745] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.503950] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.504335] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.574659]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.575368] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.848043] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e44ef57dfe, max_idle_ns: 440795250155 ns
[    3.106302] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    3.146790] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    3.186820] psmouse serio4: elantech: Elan sample query result 19, 00, 00
[    3.324539] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[    4.192028] raid6: sse2x1   gen()  3226 MB/s
[    4.240014] raid6: sse2x1   xor()  3444 MB/s
[    4.288022] raid6: sse2x2   gen()  4039 MB/s
[    4.336015] raid6: sse2x2   xor()  4195 MB/s
[    4.384009] raid6: sse2x4   gen()  5970 MB/s
[    4.432012] raid6: sse2x4   xor()  4766 MB/s
[    4.432014] raid6: using algorithm sse2x4 gen() 5970 MB/s
[    4.432015] raid6: .... xor() 4766 MB/s, rmw enabled
[    4.432016] raid6: using ssse3x2 recovery algorithm
[    4.433798] xor: measuring software checksum speed
[    4.472012]    prefetch64-sse:  8652.000 MB/sec
[    4.512009]    generic_sse:  7642.000 MB/sec
[    4.512010] xor: using function: prefetch64-sse (8652.000 MB/sec)
[    4.534165] Btrfs loaded, crc32c=crc32c-generic
[    5.034745] random: crng init done
[    6.417194] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    7.558021] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    7.558188] systemd[1]: Detected architecture x86-64.
[    7.563739] systemd[1]: Set hostname to <sturcz-K50IN>.
[    9.501930] systemd[1]: Listening on Journal Audit Socket.
[    9.502050] systemd[1]: Listening on LVM2 metadata daemon socket.
[    9.502108] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.502139] systemd[1]: Reached target Remote File Systems (Pre).
[    9.502305] systemd[1]: Created slice System Slice.
[    9.502377] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.502400] systemd[1]: Reached target Encrypted Volumes.
[   10.294901] lp: driver loaded but no devices found
[   10.325763] ppdev: user-space parallel port driver
[   20.263878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[   20.284244] systemd-journald[325]: Received request to flush runtime journal from PID 1
[   20.455075] asus_laptop: Asus Laptop Support version 0.42
[   20.455219] asus_laptop: BSTS called, 0xb700 returned
[   20.455233] asus_laptop:   K50IN model detected
[   20.459666] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input15
[   20.531059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.536589] i2c i2c-7: nForce2 SMBus adapter at 0x4d00
[   20.536598] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20160930/utaddress-247)
[   20.536605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.671104] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   20.671117] snd_hda_intel 0000:00:08.0: Disabling MSI
[   20.869640] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[   20.916709] ath: phy0: Enable LNA combining
[   20.922448] intel_powerclamp: No package C-state available
[   20.923921] ath: EEPROM regdomain: 0x60
[   20.923924] ath: EEPROM indicates we should expect a direct regpair map
[   20.923927] ath: Country alpha2 being used: 00
[   20.923928] ath: Regpair used: 0x60
[   20.958507] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.959713] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbf0000d70000, irq=18
[   21.083311] media: Linux media interface: v0.10
[   21.091864] Linux video capture interface: v2.00
[   21.155388] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   21.181719] uvcvideo 1-5:1.0: Entity type for entity Extension 5 was not initialized!
[   21.181724] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   21.181726] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[   21.181728] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   21.181867] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input16
[   21.182396] usbcore: registered new interface driver uvcvideo
[   21.182398] USB Video Class driver (1.1.1)
[   21.345372] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   21.656086] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   21.656091] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   21.656095] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   21.656097] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   21.656100] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   21.656104] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   21.656107] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   22.508230] Adding 3143676k swap on /dev/sda5.  Priority:-1 extents:1 across:3143676k FS
[   22.537607] audit: type=1400 audit(1579805822.056:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=702 comm="apparmor_parser"
[   22.537612] audit: type=1400 audit(1579805822.056:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
[   22.537614] audit: type=1400 audit(1579805822.056:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=702 comm="apparmor_parser"
[   22.537615] audit: type=1400 audit(1579805822.056:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
[   22.540077] audit: type=1400 audit(1579805822.056:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
[   22.542771] audit: type=1400 audit(1579805822.060:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=704 comm="apparmor_parser"
[   22.542775] audit: type=1400 audit(1579805822.060:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=704 comm="apparmor_parser"
[   22.542776] audit: type=1400 audit(1579805822.060:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=704 comm="apparmor_parser"
[   22.542777] audit: type=1400 audit(1579805822.060:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=704 comm="apparmor_parser"
[   22.542779] audit: type=1400 audit(1579805822.060:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=704 comm="apparmor_parser"
[   22.794191] cgroup: new mount options do not match the existing superblock, will be ignored
[   23.177639] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   23.177738] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
[   26.668215] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   26.681833] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   26.690113] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.701380] r8169 0000:03:00.0 enp3s0: link down
[   26.701442] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.899962] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   29.046796] wlp4s0: authenticate with c0:9f:e1:91:2c:aa
[   29.064177] wlp4s0: send auth to c0:9f:e1:91:2c:aa (try 1/3)
[   29.067690] wlp4s0: authenticated
[   29.068095] wlp4s0: associate with c0:9f:e1:91:2c:aa (try 1/3)
[   29.075854] wlp4s0: RX AssocResp from c0:9f:e1:91:2c:aa (capab=0x1411 status=0 aid=1)
[   29.075983] wlp4s0: associated
[   29.076085] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   29.079693] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by c0:9f:e1:91:2c:aa
sturcz@sturcz-K50IN ~ $ ^C
sturcz@sturcz-K50IN ~ $ c                                                                                                                                               
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                       

Értékelés: 

0
Még nincs értékelve
Sturcz Sándor képe

kimenet

sturcz@sturcz-K50IN ~ $ inxi -z
CPU~Dual core Pentium T4300 (-MCP-) speed/max~1200/2100 MHz Kernel~4.10.0-38-generic x86_64 Up~3 min Mem~445.4/3005.8MB HDD~250.1GB(7.4% used) Procs~156 Client~Shell inxi~2.2.35  
sturcz@sturcz-K50IN ~ $ inxi -Fz
System:    Host: sturcz-K50IN Kernel: 4.10.0-38-generic x86_64 (64 bit)
           Desktop: KDE Plasma 5.8.8 Distro: Linux Mint 18.3 Sylvia
Machine:   System: ASUSTeK (portable) product: K50IN v: 1.0
           Mobo: ASUSTeK model: K50IN v: 1.0
           Bios: American Megatrends v: 217 date: 08/26/2009
CPU:       Dual core Pentium T4300 (-MCP-) cache: 1024 KB
           clock speeds: max: 2100 MHz 1: 1600 MHz 2: 1600 MHz
Graphics:  Card: NVIDIA C79 [GeForce G102M]
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.05hz
           GLX Renderer: Gallium 0.4 on NVAC GLX Version: 3.0 Mesa 17.0.7
Audio:     Card NVIDIA MCP79 High Definition Audio driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp3s0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
           driver: ath9k
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 250.1GB (7.4% used)
           ID-1: /dev/sda model: Hitachi_HTS54322 size: 250.1GB
Partition: ID-1: / size: 29G used: 15G (55%) fs: ext4 dev: /dev/sda9
           ID-2: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 48.0C mobo: N/A gpu: 53.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 151 Uptime: 5 min Memory: 444.7/3005.8MB
           Client: Shell (bash) inxi: 2.2.35
sturcz@sturcz-K50IN ~ $ demsg
Nem található „demsg” nevű parancs, talán erre gondolt:
 „dmesg” parancs a(z) „util-linux” (main) csomagból
demsg: a parancs nem található
sturcz@sturcz-K50IN ~ $ dmesg
[    0.000000] Linux version 4.10.0-38-generic (buildd@lgw01-amd64-059) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #42~16.04.1-Ubuntu SMP Tue Oct 10 16:32:20 UTC 2017 (Ubuntu 4.10.0-38.42~16.04.1-generic 4.10.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=a1d4ba4c-6455-4461-b88c-005d06c92b5f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffa7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa8000-0x00000000bffaffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbfeff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffbff00-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff700000-0x000000011fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ASUSTeK Computer Inc.  K50IN                /K50IN      , BIOS 217     08/26/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbffa8 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9a93400ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9a9340098000] 98000 size 24576
[    0.000000] BRK [0x5ee28000, 0x5ee28fff] PGTABLE
[    0.000000] BRK [0x5ee29000, 0x5ee29fff] PGTABLE
[    0.000000] BRK [0x5ee2a000, 0x5ee2afff] PGTABLE
[    0.000000] BRK [0x5ee2b000, 0x5ee2bfff] PGTABLE
[    0.000000] BRK [0x5ee2c000, 0x5ee2cfff] PGTABLE
[    0.000000] BRK [0x5ee2d000, 0x5ee2dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32b32000-0x35590fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA180 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000BFFB0100 00007C (v01 _ASUS_ Notebook 20090826 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFB0290 0000F4 (v03 082609 FACP1156 20090826 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFB06F0 00CCAD (v01 K50IN  K50IN000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFBFF00 000040
[    0.000000] ACPI: FACS 0x00000000BFFBFF00 000040
[    0.000000] ACPI: APIC 0x00000000BFFB0390 000080 (v01 082609 APIC1156 20090826 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFB0450 00003C (v01 082609 OEMMCFG  20090826 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BFFB0490 000176 (v01 _ASUS_ Notebook 20090826 MSFT 00000097)
[    0.000000] ACPI: WDRT 0x00000000BFFB0610 000047 (v01 082609 NV-WDRT  20090826 MSFT 00000097)
[    0.000000] ACPI: ECDT 0x00000000BFFB0690 000054 (v01 082609 OEMECDT  20090826 MSFT 00000097)
[    0.000000] ACPI: DBGP 0x00000000BFFB0410 000034 (v01 082609 DBGP1156 20090826 MSFT 00000097)
[    0.000000] ACPI: BOOT 0x00000000BFFB0660 000028 (v01 082609 BOOT1156 20090826 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFBFF40 000078 (v01 082609 OEMB1156 20090826 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BFFBF6F0 000038 (v01 082609 OEMHPET0 20090826 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BFFC0D30 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffa7fff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbff7d000-0xbffa7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bffa7fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffa7fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffa7fff]
[    0.000000] On node 0 totalpages: 786245
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782248 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9a93ffa00000 s107992 r8192 d31272 u524288
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773937
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=a1d4ba4c-6455-4461-b88c-005d06c92b5f ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3030856K/3144980K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 114124K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2099.931 MHz processor
[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.86 BogoMIPS (lpj=8399724)
[    0.004024] pid_max: default: 32768 minimum: 301
[    0.004045] ACPI: Core revision 20160930
[    0.026583] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.026651] Security Framework initialized
[    0.026653] Yama: becoming mindful.
[    0.026684] AppArmor: AppArmor initialized
[    0.027306] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029970] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031253] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031264] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031864] CPU: Physical Processor ID: 0
[    0.031866] CPU: Processor Core ID: 0
[    0.031869] mce: CPU supports 6 MCE banks
[    0.031881] CPU0: Thermal monitoring enabled (TM2)
[    0.031886] process: using mwait in idle threads
[    0.031893] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.031894] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.032213] Freeing SMP alternatives memory: 32K
[    0.036014] ftrace: allocating 34229 entries in 134 pages
[    0.056208] smpboot: Max logical packages: 2
[    0.056712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.100000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.100000] ... version:                2
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      2
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             000000007fffffff
[    0.100000] ... fixed-purpose events:   3
[    0.100000] ... event mask:             0000000700000003
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] smp: Bringing up secondary CPUs ...
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.100097] smp: Brought up 1 node, 2 CPUs
[    0.100097] smpboot: Total of 2 processors activated (8399.72 BogoMIPS)
[    0.101780] devtmpfs: initialized
[    0.101780] x86/mm: Memory block size: 128MB
[    0.108419] evm: security.selinux
[    0.108421] evm: security.SMACK64
[    0.108422] evm: security.SMACK64EXEC
[    0.108423] evm: security.SMACK64TRANSMUTE
[    0.108424] evm: security.SMACK64MMAP
[    0.108425] evm: security.ima
[    0.108427] evm: security.capability
[    0.108564] PM: Registering ACPI NVS region [mem 0xbffa8000-0xbffaffff] (32768 bytes)
[    0.108567] PM: Registering ACPI NVS region [mem 0xbffbff00-0xbffeffff] (196864 bytes)
[    0.108691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108710] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.108792] pinctrl core: initialized pinctrl subsystem
[    0.109061] RTC time: 18:56:39, date: 01/23/20
[    0.109253] NET: Registered protocol family 16
[    0.120008] cpuidle: using governor ladder
[    0.132006] cpuidle: using governor menu
[    0.132010] PCCT header not found.
[    0.132078] Simple Boot Flag at 0xef set to 0x1
[    0.132097] ACPI: bus type PCI registered
[    0.132100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.132238] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[    0.132241] PCI: not using MMCONFIG
[    0.132243] PCI: Using configuration type 1 for base access
[    0.132301] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.132301] mtrr: probably your BIOS does not setup all CPUs.
[    0.132301] mtrr: corrected configuration.
[    0.144080] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.144162] ACPI: Added _OSI(Module Device)
[    0.144164] ACPI: Added _OSI(Processor Device)
[    0.144166] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.144167] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144173] ACPI : EC: EC started
[    0.144175] ACPI : EC: interrupt blocked
[    0.146019] ACPI: \: Used as first EC
[    0.146022] ACPI: \: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.146025] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.148049] ACPI: Executed 1 blocks of module-level executable AML code
[    0.155565] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.156519] ACPI: Dynamic OEM Table Load:
[    0.156531] ACPI: SSDT 0xFFFF9A93FB9E7800 000206 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.156975] ACPI: Dynamic OEM Table Load:
[    0.156987] ACPI: SSDT 0xFFFF9A93FB9F3800 0007FB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.157819] ACPI: Dynamic OEM Table Load:
[    0.157828] ACPI: SSDT 0xFFFF9A93FB9BD900 0000CC (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.158115] ACPI: Dynamic OEM Table Load:
[    0.158124] ACPI: SSDT 0xFFFF9A93FB9CE300 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.159172] ACPI : EC: EC stopped
[    0.159174] ACPI : EC: EC started
[    0.159175] ACPI : EC: interrupt blocked
[    0.160224] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.160228] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.160231] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.160232] ACPI: Interpreter enabled
[    0.160276] ACPI: (supports S0 S3 S4 S5)
[    0.160278] ACPI: Using IOAPIC for interrupt routing
[    0.160340] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[    0.162180] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[    0.162199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.179801] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.179812] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.180202] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[    0.180375] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.180379] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.180382] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[    0.180385] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.180415] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
[    0.180885] PCI host bridge to bus 0000:00
[    0.180889] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.180892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.180895] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.180897] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.180900] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff window]
[    0.180903] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfebfffff window]
[    0.180906] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.180927] pci 0000:00:00.0: [10de:0a83] type 00 class 0x060000
[    0.181177] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
[    0.181430] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
[    0.181445] pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.181633] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
[    0.181840] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
[    0.181858] pci 0000:00:03.2: reg 0x10: [io  0x4900-0x493f]
[    0.181889] pci 0000:00:03.2: reg 0x20: [io  0x4d00-0x4d3f]
[    0.181899] pci 0000:00:03.2: reg 0x24: [io  0x4e00-0x4e3f]
[    0.181948] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.182020] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.182109] pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
[    0.182362] pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
[    0.182387] pci 0000:00:03.5: reg 0x10: [mem 0xfae80000-0xfaefffff]
[    0.182645] pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
[    0.182662] pci 0000:00:04.0: reg 0x10: [mem 0xfae7f000-0xfae7ffff]
[    0.182738] pci 0000:00:04.0: supports D1 D2
[    0.182741] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.182813] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.182904] pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
[    0.182922] pci 0000:00:04.1: reg 0x10: [mem 0xfae7ec00-0xfae7ecff]
[    0.183006] pci 0000:00:04.1: supports D1 D2
[    0.183008] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183077] pci 0000:00:04.1: System wakeup disabled by ACPI
[    0.183175] pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
[    0.183192] pci 0000:00:08.0: reg 0x10: [mem 0xfae78000-0xfae7bfff]
[    0.183268] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.183336] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.183420] pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
[    0.183534] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.183625] pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
[    0.183642] pci 0000:00:0b.0: reg 0x10: [io  0xc080-0xc087]
[    0.183651] pci 0000:00:0b.0: reg 0x14: [io  0xc000-0xc003]
[    0.183660] pci 0000:00:0b.0: reg 0x18: [io  0xbc00-0xbc07]
[    0.183669] pci 0000:00:0b.0: reg 0x1c: [io  0xb880-0xb883]
[    0.183678] pci 0000:00:0b.0: reg 0x20: [io  0xb800-0xb80f]
[    0.183687] pci 0000:00:0b.0: reg 0x24: [mem 0xfae7c000-0xfae7dfff]
[    0.183871] pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
[    0.183938] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184135] pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
[    0.184380] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184480] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.184600] pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
[    0.184842] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184941] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.185133] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[    0.185143] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.185146] pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.185149] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.185152] pci 0000:00:09.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.185155] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xfbffffff window] (subtractive decode)
[    0.185158] pci 0000:00:09.0:   bridge window [mem 0xfe000000-0xfebfffff window] (subtractive decode)
[    0.185249] pci 0000:02:00.0: [10de:0873] type 00 class 0x030000
[    0.185269] pci 0000:02:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.185285] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.185299] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[    0.185309] pci 0000:02:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.185321] pci 0000:02:00.0: reg 0x30: [mem 0xfafe0000-0xfaffffff pref]
[    0.185488] pci 0000:00:10.0: PCI bridge to [bus 02]
[    0.185495] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.185499] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.185505] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.185654] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.185677] pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.185711] pci 0000:03:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
[    0.185749] pci 0000:03:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[    0.185853] pci 0000:03:00.0: supports D1 D2
[    0.185856] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.185965] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.185981] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.185997] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.186007] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.186170] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[    0.186198] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[    0.186332] pci 0000:04:00.0: supports D1
[    0.186335] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.196033] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.196056] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.197570] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.197778] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.197984] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.198187] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.198392] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[    0.198595] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.198798] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.199002] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.199205] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.199409] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.199613] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.199817] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.200034] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.200241] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.200445] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.200650] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.200858] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *9
[    0.201061] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.201267] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.201471] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.201678] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[    0.201882] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.202086] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.202291] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.202495] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.202704] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.202909] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.203112] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.203316] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.203520] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.203724] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.203928] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.204149] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
[    0.204362] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.204565] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.204772] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.204977] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *9
[    0.205183] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
[    0.205394] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
[    0.205604] ACPI: PCI Interrupt Link [LSA0] (IRQs *5)
[    0.205833] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.206035] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.206237] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.206441] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
[    0.206645] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.206848] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.207056] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
[    0.207268] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
[    0.207477] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[    0.207682] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[    0.208229] ACPI : EC: interrupt unblocked
[    0.208242] ACPI : EC: event unblocked
[    0.208275] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.208278] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.209073] SCSI subsystem initialized
[    0.209098] libata version 3.00 loaded.
[    0.209098] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.209098] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.209098] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.209098] vgaarb: loaded
[    0.209098] ACPI: bus type USB registered
[    0.209098] usbcore: registered new interface driver usbfs
[    0.209098] usbcore: registered new interface driver hub
[    0.209098] usbcore: registered new device driver usb
[    0.209098] PCI: Using ACPI for IRQ routing
[    0.209098] PCI: pci_cache_line_size set to 64 bytes
[    0.209181] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.209184] e820: reserve RAM buffer [mem 0xbffa8000-0xbfffffff]
[    0.209403] NetLabel: Initializing
[    0.209405] NetLabel:  domain hash size = 128
[    0.209406] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.209442] NetLabel:  unlabeled traffic allowed by default
[    0.209487] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.209487] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.209487] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.212032] clocksource: Switched to clocksource hpet
[    0.233374] VFS: Disk quotas dquot_6.6.0
[    0.233418] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.233662] AppArmor: AppArmor Filesystem Enabled
[    0.233775] pnp: PnP ACPI init
[    0.234029] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.234171] pnp 00:01: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.234878] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.234882] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.234886] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.234889] system 00:02: [io  0x4080-0x40ff] has been reserved
[    0.234893] system 00:02: [io  0x4400-0x447f] has been reserved
[    0.234896] system 00:02: [io  0x4480-0x44ff] has been reserved
[    0.234899] system 00:02: [io  0x4800-0x487f] has been reserved
[    0.234903] system 00:02: [io  0x4880-0x48ff] has been reserved
[    0.234907] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.234910] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.234914] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[    0.234923] system 00:02: [mem 0xfefe2000-0xfefe3fff] has been reserved
[    0.234926] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.234930] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.234933] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.234940] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235089] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.235242] system 00:04: [io  0x0250-0x0253] has been reserved
[    0.235246] system 00:04: [io  0x0256-0x025f] has been reserved
[    0.235250] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.235254] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.235260] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235401] system 00:05: [io  0x0260-0x026f] has been reserved
[    0.235407] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235549] system 00:06: [io  0x5000-0x507f] has been reserved
[    0.235553] system 00:06: [io  0x5080-0x50ff] has been reserved
[    0.235558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235726] system 00:07: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.235732] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236201] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.236204] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.236208] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.236211] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.236215] system 00:08: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.236221] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.237671] pnp: PnP ACPI: found 9 devices
[    0.246567] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.246643] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.246658] pci 0000:00:10.0: PCI bridge to [bus 02]
[    0.246662] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.246668] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.246673] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.246680] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.246686] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.246698] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.246719] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.246731] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.246754] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.246757] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.246760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246763] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.246766] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfbffffff window]
[    0.246769] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.246772] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.246775] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.246778] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246781] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.246784] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xfbffffff window]
[    0.246787] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.246790] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.246793] pci_bus 0000:02: resource 1 [mem 0xfaf00000-0xfbffffff]
[    0.246795] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.246798] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.246801] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.246804] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.246985] NET: Registered protocol family 2
[    0.247335] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.247505] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.247707] TCP: Hash tables configured (established 32768 bind 32768)
[    0.247795] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.247833] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.247994] NET: Registered protocol family 1
[    0.248578] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.308515] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.308741] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.308752] PCI: CLS 64 bytes, default 64
[    0.308859] Unpacking initramfs...
[    1.836813] Freeing initrd memory: 43388K
[    1.837194] Scanning for low memory corruption every 60 seconds
[    1.837853] audit: initializing netlink subsys (disabled)
[    1.837978] audit: type=2000 audit(1579805800.836:1): initialized
[    1.838666] Initialise system trusted keyrings
[    1.838825] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.842937] zbud: loaded
[    1.844057] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.844562] fuse init (API version 7.26)
[    1.847062] Key type asymmetric registered
[    1.847066] Asymmetric key parser 'x509' registered
[    1.847167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.847226] io scheduler noop registered
[    1.847228] io scheduler deadline registered
[    1.847247] io scheduler cfq registered (default)
[    1.847953] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 21
[    1.848521] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 20
[    1.848798] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.848799] vesafb: scrolling: redraw
[    1.848802] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.848825] vesafb: framebuffer at 0xf9000000, mapped to 0xffffbf0000c00000, using 1216k, total 1216k
[    1.849015] Console: switching to colour frame buffer device 80x30
[    1.849039] fb0: VESA VGA frame buffer device
[    1.849069] intel_idle: does not run on family 6 model 23
[    1.849268] ACPI: AC Adapter [AC0] (off-line)
[    1.849453] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.849458] ACPI: Power Button [PWRB]
[    1.849544] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.849554] ACPI: Sleep Button [SLPB]
[    1.850941] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.850948] ACPI: Lid Switch [LID]
[    1.851037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.851040] ACPI: Power Button [PWRF]
[    1.851891] Monitor-Mwait will be used to enter C-1 state
[    1.851907] Monitor-Mwait will be used to enter C-2 state
[    1.851921] Monitor-Mwait will be used to enter C-3 state
[    1.851932] tsc: Marking TSC unstable due to TSC halts in idle
[    1.854894] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.855346] thermal LNXTHERM:00: registered as thermal_zone0
[    1.855349] ACPI: Thermal Zone [THRM] (36 C)
[    1.855671] GHES: HEST is not enabled!
[    1.856110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.860588] Linux agpgart interface v0.103
[    1.864662] loop: module loaded
[    1.865104] libphy: Fixed MDIO Bus: probed
[    1.865106] tun: Universal TUN/TAP device driver, 1.6
[    1.865108] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.865235] PPP generic driver version 2.4.2
[    1.865336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.865342] ehci-pci: EHCI PCI platform driver
[    1.865591] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.865603] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.865617] ehci-pci 0000:00:04.1: debug port 1
[    1.865672] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.865699] ehci-pci 0000:00:04.1: irq 22, io mem 0xfae7ec00
[    1.875463] random: fast init done
[    1.880038] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.880150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.880154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.880157] usb usb1: Product: EHCI Host Controller
[    1.880160] usb usb1: Manufacturer: Linux 4.10.0-38-generic ehci_hcd
[    1.880162] usb usb1: SerialNumber: 0000:00:04.1
[    1.880430] hub 1-0:1.0: USB hub found
[    1.880446] hub 1-0:1.0: 8 ports detected
[    1.883175] ehci-platform: EHCI generic platform driver
[    1.883210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.883218] ohci-pci: OHCI PCI platform driver
[    1.883393] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.883403] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.883443] ohci-pci 0000:00:04.0: irq 23, io mem 0xfae7f000
[    1.890496] ACPI: Battery Slot [BAT0] (battery present)
[    1.942092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.942096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.942099] usb usb2: Product: OHCI PCI host controller
[    1.942102] usb usb2: Manufacturer: Linux 4.10.0-38-generic ohci_hcd
[    1.942105] usb usb2: SerialNumber: 0000:00:04.0
[    1.942374] hub 2-0:1.0: USB hub found
[    1.942388] hub 2-0:1.0: 8 ports detected
[    1.945092] ohci-platform: OHCI generic platform driver
[    1.945119] uhci_hcd: USB Universal Host Controller Interface driver
[    1.945262] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.948793] i8042: Detected active multiplexing controller, rev 1.1
[    1.951212] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.951221] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.951297] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.951363] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.951428] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.951751] mousedev: PS/2 mouse device common for all mice
[    1.952292] rtc_cmos 00:03: RTC can wake from S4
[    1.952629] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.952685] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.952700] i2c /dev entries driver
[    1.952826] device-mapper: uevent: version 1.0.3
[    1.953037] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.953093] ledtrig-cpu: registered to indicate activity on CPUs
[    1.953728] NET: Registered protocol family 10
[    1.962355] Segment Routing with IPv6
[    1.962395] NET: Registered protocol family 17
[    1.962416] Key type dns_resolver registered
[    1.962864] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[    1.962959] microcode: Microcode Update Driver: v2.2.
[    1.963278] registered taskstats version 1
[    1.963299] Loading compiled-in X.509 certificates
[    1.969435] Loaded X.509 cert 'Build time autogenerated kernel key: 0e953fd717aa51b8d9e0128dd1af1f8370b86949'
[    1.969482] zswap: loaded using pool lzo/zbud
[    1.973702] Key type big_key registered
[    1.973709] Key type trusted registered
[    1.977593] Key type encrypted registered
[    1.977600] AppArmor: AppArmor sha1 policy hashing enabled
[    1.977605] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.977657] evm: HMAC attrs: 0x1
[    1.978061]   Magic number: 4:498:949
[    1.978087] mdio_bus fixed-0: hash matches
[    1.978138] tty tty6: hash matches
[    1.978213] memory memory2: hash matches
[    1.978331] rtc_cmos 00:03: setting system clock to 2020-01-23 18:56:41 UTC (1579805801)
[    1.979626] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.979627] EDD information not available.
[    1.979676] PM: Hibernation image not present or could not be loaded.
[    1.983042] Freeing unused kernel memory: 2228K
[    1.983045] Write protecting the kernel read-only data: 14336k
[    1.984324] Freeing unused kernel memory: 1156K
[    1.985367] Freeing unused kernel memory: 268K
[    1.996330] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.996563] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.092305] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    2.095415] wmi: Mapper loaded
[    2.105902] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.119719] ahci 0000:00:0b.0: version 3.0
[    2.119995] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 5
[    2.120117] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    2.120227] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.120230] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[    2.120789] scsi host0: ahci
[    2.120968] scsi host1: ahci
[    2.121041] ata1: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c100 irq 24
[    2.121043] ata2: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c180 irq 24
[    2.129448] [drm] Initialized
[    2.129611] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.129633] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.129925] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    2.130352] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffbf0000671000, 90:e6:ba:1f:ed:67, XID 18000000 IRQ 25
[    2.130354] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    2.175397] acpi device:23: registered as cooling_device2
[    2.180327] acpi device:24: registered as cooling_device3
[    2.180428] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:00/input/input9
[    2.201593] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.216378] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.218556] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[    2.218646] checking generic (f9000000 130000) vs hw (e0000000 10000000)
[    2.218647] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[    2.218648] fb: switching to nouveaufb from VESA VGA
[    2.218684] Console: switching to colour dummy device 80x25
[    2.218914] nouveau 0000:02:00.0: NVIDIA MCP79/MCP7A (0ac980b1)
[    2.234300] nouveau 0000:02:00.0: bios: version 62.79.71.00.01
[    2.255574] nouveau 0000:02:00.0: fb: 512 MiB stolen system memory
[    2.311676] [TTM] Zone  kernel: Available graphics memory: 1538964 kiB
[    2.311677] [TTM] Initializing pool allocator
[    2.311684] [TTM] Initializing DMA pool allocator
[    2.311706] nouveau 0000:02:00.0: DRM: VRAM: 512 MiB
[    2.311707] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[    2.311712] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[    2.311714] nouveau 0000:02:00.0: DRM: DCB version 4.0
[    2.311716] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000323 00010034
[    2.311719] nouveau 0000:02:00.0: DRM: DCB outp 01: 02011300 0000001e
[    2.311721] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[    2.311723] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[    2.316351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.316352] [drm] Driver supports precise vblank timestamp query.
[    2.316457] nouveau 0000:02:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.327150] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[    2.373906] nouveau 0000:02:00.0: DRM: allocated 1366x768 fb: 0x50000, bo ffff9a9375392800
[    2.376564] fbcon: nouveaufb (fb0) is primary device
[    2.376735] Console: switching to colour frame buffer device 170x48
[    2.376770] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[    2.408052] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[    2.408224] usb 1-5: New USB device found, idVendor=04f2, idProduct=b071
[    2.408226] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.408228] usb 1-5: Product: CNF7129
[    2.408230] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
[    2.408231] usb 1-5: SerialNumber: SN0001
[    2.436962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.436982] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.439503] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LC01, max UDMA/100
[    2.442501] ata2.00: configured for UDMA/100
[    2.445177] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[    2.445179] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.446558] ata1.00: configured for UDMA/133
[    2.446807] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 C40C PQ: 0 ANSI: 5
[    2.476282] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.476446] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.476465] sd 0:0:0:0: [sda] Write Protect is off
[    2.476467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.476493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.478535] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LC01 PQ: 0 ANSI: 5
[    2.503743] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.503745] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.503950] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.504335] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.574659]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.575368] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.848043] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e44ef57dfe, max_idle_ns: 440795250155 ns
[    3.106302] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    3.146790] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    3.186820] psmouse serio4: elantech: Elan sample query result 19, 00, 00
[    3.324539] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[    4.192028] raid6: sse2x1   gen()  3226 MB/s
[    4.240014] raid6: sse2x1   xor()  3444 MB/s
[    4.288022] raid6: sse2x2   gen()  4039 MB/s
[    4.336015] raid6: sse2x2   xor()  4195 MB/s
[    4.384009] raid6: sse2x4   gen()  5970 MB/s
[    4.432012] raid6: sse2x4   xor()  4766 MB/s
[    4.432014] raid6: using algorithm sse2x4 gen() 5970 MB/s
[    4.432015] raid6: .... xor() 4766 MB/s, rmw enabled
[    4.432016] raid6: using ssse3x2 recovery algorithm
[    4.433798] xor: measuring software checksum speed
[    4.472012]    prefetch64-sse:  8652.000 MB/sec
[    4.512009]    generic_sse:  7642.000 MB/sec
[    4.512010] xor: using function: prefetch64-sse (8652.000 MB/sec)
[    4.534165] Btrfs loaded, crc32c=crc32c-generic
[    5.034745] random: crng init done
[    6.417194] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    7.558021] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    7.558188] systemd[1]: Detected architecture x86-64.
[    7.563739] systemd[1]: Set hostname to <sturcz-K50IN>.
[    9.501930] systemd[1]: Listening on Journal Audit Socket.
[    9.502050] systemd[1]: Listening on LVM2 metadata daemon socket.
[    9.502108] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.502139] systemd[1]: Reached target Remote File Systems (Pre).
[    9.502305] systemd[1]: Created slice System Slice.
[    9.502377] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.502400] systemd[1]: Reached target Encrypted Volumes.
[   10.294901] lp: driver loaded but no devices found
[   10.325763] ppdev: user-space parallel port driver
[   20.263878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[   20.284244] systemd-journald[325]: Received request to flush runtime journal from PID 1
[   20.455075] asus_laptop: Asus Laptop Support version 0.42
[   20.455219] asus_laptop: BSTS called, 0xb700 returned
[   20.455233] asus_laptop:   K50IN model detected
[   20.459666] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input15
[   20.531059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.536589] i2c i2c-7: nForce2 SMBus adapter at 0x4d00
[   20.536598] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20160930/utaddress-247)
[   20.536605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.671104] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   20.671117] snd_hda_intel 0000:00:08.0: Disabling MSI
[   20.869640] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[   20.916709] ath: phy0: Enable LNA combining
[   20.922448] intel_powerclamp: No package C-state available
[   20.923921] ath: EEPROM regdomain: 0x60
[   20.923924] ath: EEPROM indicates we should expect a direct regpair map
[   20.923927] ath: Country alpha2 being used: 00
[   20.923928] ath: Regpair used: 0x60
[   20.958507] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.959713] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbf0000d70000, irq=18
[   21.083311] media: Linux media interface: v0.10
[   21.091864] Linux video capture interface: v2.00
[   21.155388] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   21.181719] uvcvideo 1-5:1.0: Entity type for entity Extension 5 was not initialized!
[   21.181724] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   21.181726] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[   21.181728] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   21.181867] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input16
[   21.182396] usbcore: registered new interface driver uvcvideo
[   21.182398] USB Video Class driver (1.1.1)
[   21.345372] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   21.656086] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   21.656091] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   21.656095] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   21.656097] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   21.656100] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   21.656104] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   21.656107] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   22.508230] Adding 3143676k swap on /dev/sda5.  Priority:-1 extents:1 across:3143676k FS
[   22.537607] audit: type=1400 audit(1579805822.056:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=702 comm="apparmor_parser"
[   22.537612] audit: type=1400 audit(1579805822.056:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
[   22.537614] audit: type=1400 audit(1579805822.056:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=702 comm="apparmor_parser"
[   22.537615] audit: type=1400 audit(1579805822.056:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
[   22.540077] audit: type=1400 audit(1579805822.056:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
[   22.542771] audit: type=1400 audit(1579805822.060:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=704 comm="apparmor_parser"
[   22.542775] audit: type=1400 audit(1579805822.060:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=704 comm="apparmor_parser"
[   22.542776] audit: type=1400 audit(1579805822.060:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=704 comm="apparmor_parser"
[   22.542777] audit: type=1400 audit(1579805822.060:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=704 comm="apparmor_parser"
[   22.542779] audit: type=1400 audit(1579805822.060:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=704 comm="apparmor_parser"
[   22.794191] cgroup: new mount options do not match the existing superblock, will be ignored
[   23.177639] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   23.177738] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
[   26.668215] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   26.681833] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   26.690113] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.701380] r8169 0000:03:00.0 enp3s0: link down
[   26.701442] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.899962] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   29.046796] wlp4s0: authenticate with c0:9f:e1:91:2c:aa
[   29.064177] wlp4s0: send auth to c0:9f:e1:91:2c:aa (try 1/3)
[   29.067690] wlp4s0: authenticated
[   29.068095] wlp4s0: associate with c0:9f:e1:91:2c:aa (try 1/3)
[   29.075854] wlp4s0: RX AssocResp from c0:9f:e1:91:2c:aa (capab=0x1411 status=0 aid=1)
[   29.075983] wlp4s0: associated
[   29.076085] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   29.079693] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by c0:9f:e1:91:2c:aa
sturcz@sturcz-K50IN ~ $ ^C
sturcz@sturcz-K50IN ~ $ c                                                                                                                                               
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        sturcz@sturcz-K50IN ~ $ inxi -z
CPU~Dual core Pentium T4300 (-MCP-) speed/max~1200/2100 MHz Kernel~4.10.0-38-generic x86_64 Up~3 min Mem~445.4/3005.8MB HDD~250.1GB(7.4% used) Procs~156 Client~Shell inxi~2.2.35  
sturcz@sturcz-K50IN ~ $ inxi -Fz
System:    Host: sturcz-K50IN Kernel: 4.10.0-38-generic x86_64 (64 bit)
           Desktop: KDE Plasma 5.8.8 Distro: Linux Mint 18.3 Sylvia
Machine:   System: ASUSTeK (portable) product: K50IN v: 1.0
           Mobo: ASUSTeK model: K50IN v: 1.0
           Bios: American Megatrends v: 217 date: 08/26/2009
CPU:       Dual core Pentium T4300 (-MCP-) cache: 1024 KB
           clock speeds: max: 2100 MHz 1: 1600 MHz 2: 1600 MHz
Graphics:  Card: NVIDIA C79 [GeForce G102M]
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.05hz
           GLX Renderer: Gallium 0.4 on NVAC GLX Version: 3.0 Mesa 17.0.7
Audio:     Card NVIDIA MCP79 High Definition Audio driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp3s0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
           driver: ath9k
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 250.1GB (7.4% used)
           ID-1: /dev/sda model: Hitachi_HTS54322 size: 250.1GB
Partition: ID-1: / size: 29G used: 15G (55%) fs: ext4 dev: /dev/sda9
           ID-2: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 48.0C mobo: N/A gpu: 53.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 151 Uptime: 5 min Memory: 444.7/3005.8MB
           Client: Shell (bash) inxi: 2.2.35
sturcz@sturcz-K50IN ~ $ demsg
Nem található „demsg” nevű parancs, talán erre gondolt:
 „dmesg” parancs a(z) „util-linux” (main) csomagból
demsg: a parancs nem található
sturcz@sturcz-K50IN ~ $ dmesg
[    0.000000] Linux version 4.10.0-38-generic (buildd@lgw01-amd64-059) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #42~16.04.1-Ubuntu SMP Tue Oct 10 16:32:20 UTC 2017 (Ubuntu 4.10.0-38.42~16.04.1-generic 4.10.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=a1d4ba4c-6455-4461-b88c-005d06c92b5f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffa7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa8000-0x00000000bffaffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbfeff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffbff00-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff700000-0x000000011fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ASUSTeK Computer Inc.  K50IN                /K50IN      , BIOS 217     08/26/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbffa8 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9a93400ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9a9340098000] 98000 size 24576
[    0.000000] BRK [0x5ee28000, 0x5ee28fff] PGTABLE
[    0.000000] BRK [0x5ee29000, 0x5ee29fff] PGTABLE
[    0.000000] BRK [0x5ee2a000, 0x5ee2afff] PGTABLE
[    0.000000] BRK [0x5ee2b000, 0x5ee2bfff] PGTABLE
[    0.000000] BRK [0x5ee2c000, 0x5ee2cfff] PGTABLE
[    0.000000] BRK [0x5ee2d000, 0x5ee2dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32b32000-0x35590fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA180 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000BFFB0100 00007C (v01 _ASUS_ Notebook 20090826 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFB0290 0000F4 (v03 082609 FACP1156 20090826 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFB06F0 00CCAD (v01 K50IN  K50IN000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFBFF00 000040
[    0.000000] ACPI: FACS 0x00000000BFFBFF00 000040
[    0.000000] ACPI: APIC 0x00000000BFFB0390 000080 (v01 082609 APIC1156 20090826 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFB0450 00003C (v01 082609 OEMMCFG  20090826 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BFFB0490 000176 (v01 _ASUS_ Notebook 20090826 MSFT 00000097)
[    0.000000] ACPI: WDRT 0x00000000BFFB0610 000047 (v01 082609 NV-WDRT  20090826 MSFT 00000097)
[    0.000000] ACPI: ECDT 0x00000000BFFB0690 000054 (v01 082609 OEMECDT  20090826 MSFT 00000097)
[    0.000000] ACPI: DBGP 0x00000000BFFB0410 000034 (v01 082609 DBGP1156 20090826 MSFT 00000097)
[    0.000000] ACPI: BOOT 0x00000000BFFB0660 000028 (v01 082609 BOOT1156 20090826 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFBFF40 000078 (v01 082609 OEMB1156 20090826 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BFFBF6F0 000038 (v01 082609 OEMHPET0 20090826 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BFFC0D30 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffa7fff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbff7d000-0xbffa7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bffa7fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffa7fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffa7fff]
[    0.000000] On node 0 totalpages: 786245
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782248 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9a93ffa00000 s107992 r8192 d31272 u524288
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773937
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=a1d4ba4c-6455-4461-b88c-005d06c92b5f ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3030856K/3144980K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 114124K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2099.931 MHz processor
[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.86 BogoMIPS (lpj=8399724)
[    0.004024] pid_max: default: 32768 minimum: 301
[    0.004045] ACPI: Core revision 20160930
[    0.026583] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.026651] Security Framework initialized
[    0.026653] Yama: becoming mindful.
[    0.026684] AppArmor: AppArmor initialized
[    0.027306] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029970] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031253] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031264] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031864] CPU: Physical Processor ID: 0
[    0.031866] CPU: Processor Core ID: 0
[    0.031869] mce: CPU supports 6 MCE banks
[    0.031881] CPU0: Thermal monitoring enabled (TM2)
[    0.031886] process: using mwait in idle threads
[    0.031893] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.031894] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.032213] Freeing SMP alternatives memory: 32K
[    0.036014] ftrace: allocating 34229 entries in 134 pages
[    0.056208] smpboot: Max logical packages: 2
[    0.056712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.100000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.100000] ... version:                2
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      2
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             000000007fffffff
[    0.100000] ... fixed-purpose events:   3
[    0.100000] ... event mask:             0000000700000003
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] smp: Bringing up secondary CPUs ...
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.100097] smp: Brought up 1 node, 2 CPUs
[    0.100097] smpboot: Total of 2 processors activated (8399.72 BogoMIPS)
[    0.101780] devtmpfs: initialized
[    0.101780] x86/mm: Memory block size: 128MB
[    0.108419] evm: security.selinux
[    0.108421] evm: security.SMACK64
[    0.108422] evm: security.SMACK64EXEC
[    0.108423] evm: security.SMACK64TRANSMUTE
[    0.108424] evm: security.SMACK64MMAP
[    0.108425] evm: security.ima
[    0.108427] evm: security.capability
[    0.108564] PM: Registering ACPI NVS region [mem 0xbffa8000-0xbffaffff] (32768 bytes)
[    0.108567] PM: Registering ACPI NVS region [mem 0xbffbff00-0xbffeffff] (196864 bytes)
[    0.108691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108710] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.108792] pinctrl core: initialized pinctrl subsystem
[    0.109061] RTC time: 18:56:39, date: 01/23/20
[    0.109253] NET: Registered protocol family 16
[    0.120008] cpuidle: using governor ladder
[    0.132006] cpuidle: using governor menu
[    0.132010] PCCT header not found.
[    0.132078] Simple Boot Flag at 0xef set to 0x1
[    0.132097] ACPI: bus type PCI registered
[    0.132100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.132238] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[    0.132241] PCI: not using MMCONFIG
[    0.132243] PCI: Using configuration type 1 for base access
[    0.132301] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.132301] mtrr: probably your BIOS does not setup all CPUs.
[    0.132301] mtrr: corrected configuration.
[    0.144080] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.144162] ACPI: Added _OSI(Module Device)
[    0.144164] ACPI: Added _OSI(Processor Device)
[    0.144166] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.144167] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144173] ACPI : EC: EC started
[    0.144175] ACPI : EC: interrupt blocked
[    0.146019] ACPI: \: Used as first EC
[    0.146022] ACPI: \: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.146025] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.148049] ACPI: Executed 1 blocks of module-level executable AML code
[    0.155565] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.156519] ACPI: Dynamic OEM Table Load:
[    0.156531] ACPI: SSDT 0xFFFF9A93FB9E7800 000206 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.156975] ACPI: Dynamic OEM Table Load:
[    0.156987] ACPI: SSDT 0xFFFF9A93FB9F3800 0007FB (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.157819] ACPI: Dynamic OEM Table Load:
[    0.157828] ACPI: SSDT 0xFFFF9A93FB9BD900 0000CC (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.158115] ACPI: Dynamic OEM Table Load:
[    0.158124] ACPI: SSDT 0xFFFF9A93FB9CE300 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.159172] ACPI : EC: EC stopped
[    0.159174] ACPI : EC: EC started
[    0.159175] ACPI : EC: interrupt blocked
[    0.160224] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.160228] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.160231] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.160232] ACPI: Interpreter enabled
[    0.160276] ACPI: (supports S0 S3 S4 S5)
[    0.160278] ACPI: Using IOAPIC for interrupt routing
[    0.160340] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[    0.162180] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[    0.162199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.179801] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.179812] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.180202] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[    0.180375] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.180379] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.180382] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[    0.180385] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.180415] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
[    0.180885] PCI host bridge to bus 0000:00
[    0.180889] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.180892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.180895] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.180897] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.180900] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff window]
[    0.180903] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfebfffff window]
[    0.180906] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.180927] pci 0000:00:00.0: [10de:0a83] type 00 class 0x060000
[    0.181177] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
[    0.181430] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
[    0.181445] pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.181633] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
[    0.181840] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
[    0.181858] pci 0000:00:03.2: reg 0x10: [io  0x4900-0x493f]
[    0.181889] pci 0000:00:03.2: reg 0x20: [io  0x4d00-0x4d3f]
[    0.181899] pci 0000:00:03.2: reg 0x24: [io  0x4e00-0x4e3f]
[    0.181948] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.182020] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.182109] pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
[    0.182362] pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
[    0.182387] pci 0000:00:03.5: reg 0x10: [mem 0xfae80000-0xfaefffff]
[    0.182645] pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
[    0.182662] pci 0000:00:04.0: reg 0x10: [mem 0xfae7f000-0xfae7ffff]
[    0.182738] pci 0000:00:04.0: supports D1 D2
[    0.182741] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.182813] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.182904] pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
[    0.182922] pci 0000:00:04.1: reg 0x10: [mem 0xfae7ec00-0xfae7ecff]
[    0.183006] pci 0000:00:04.1: supports D1 D2
[    0.183008] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183077] pci 0000:00:04.1: System wakeup disabled by ACPI
[    0.183175] pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
[    0.183192] pci 0000:00:08.0: reg 0x10: [mem 0xfae78000-0xfae7bfff]
[    0.183268] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.183336] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.183420] pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
[    0.183534] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.183625] pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
[    0.183642] pci 0000:00:0b.0: reg 0x10: [io  0xc080-0xc087]
[    0.183651] pci 0000:00:0b.0: reg 0x14: [io  0xc000-0xc003]
[    0.183660] pci 0000:00:0b.0: reg 0x18: [io  0xbc00-0xbc07]
[    0.183669] pci 0000:00:0b.0: reg 0x1c: [io  0xb880-0xb883]
[    0.183678] pci 0000:00:0b.0: reg 0x20: [io  0xb800-0xb80f]
[    0.183687] pci 0000:00:0b.0: reg 0x24: [mem 0xfae7c000-0xfae7dfff]
[    0.183871] pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
[    0.183938] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184135] pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
[    0.184380] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184480] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.184600] pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
[    0.184842] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184941] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.185133] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[    0.185143] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.185146] pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.185149] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.185152] pci 0000:00:09.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.185155] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xfbffffff window] (subtractive decode)
[    0.185158] pci 0000:00:09.0:   bridge window [mem 0xfe000000-0xfebfffff window] (subtractive decode)
[    0.185249] pci 0000:02:00.0: [10de:0873] type 00 class 0x030000
[    0.185269] pci 0000:02:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.185285] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.185299] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[    0.185309] pci 0000:02:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.185321] pci 0000:02:00.0: reg 0x30: [mem 0xfafe0000-0xfaffffff pref]
[    0.185488] pci 0000:00:10.0: PCI bridge to [bus 02]
[    0.185495] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.185499] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.185505] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.185654] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.185677] pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.185711] pci 0000:03:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
[    0.185749] pci 0000:03:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[    0.185853] pci 0000:03:00.0: supports D1 D2
[    0.185856] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.185965] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.185981] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.185997] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.186007] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.186170] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[    0.186198] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[    0.186332] pci 0000:04:00.0: supports D1
[    0.186335] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.196033] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.196056] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.197570] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.197778] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.197984] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.198187] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.198392] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[    0.198595] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.198798] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.199002] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.199205] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.199409] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.199613] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.199817] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.200034] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.200241] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.200445] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.200650] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.200858] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *9
[    0.201061] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.201267] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.201471] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.201678] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[    0.201882] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.202086] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.202291] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.202495] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.202704] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.202909] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.203112] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.203316] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.203520] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.203724] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.203928] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.204149] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
[    0.204362] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.204565] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.204772] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.204977] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *9
[    0.205183] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
[    0.205394] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
[    0.205604] ACPI: PCI Interrupt Link [LSA0] (IRQs *5)
[    0.205833] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.206035] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.206237] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.206441] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
[    0.206645] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.206848] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.207056] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
[    0.207268] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
[    0.207477] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[    0.207682] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[    0.208229] ACPI : EC: interrupt unblocked
[    0.208242] ACPI : EC: event unblocked
[    0.208275] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.208278] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.209073] SCSI subsystem initialized
[    0.209098] libata version 3.00 loaded.
[    0.209098] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.209098] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.209098] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.209098] vgaarb: loaded
[    0.209098] ACPI: bus type USB registered
[    0.209098] usbcore: registered new interface driver usbfs
[    0.209098] usbcore: registered new interface driver hub
[    0.209098] usbcore: registered new device driver usb
[    0.209098] PCI: Using ACPI for IRQ routing
[    0.209098] PCI: pci_cache_line_size set to 64 bytes
[    0.209181] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.209184] e820: reserve RAM buffer [mem 0xbffa8000-0xbfffffff]
[    0.209403] NetLabel: Initializing
[    0.209405] NetLabel:  domain hash size = 128
[    0.209406] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.209442] NetLabel:  unlabeled traffic allowed by default
[    0.209487] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.209487] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.209487] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.212032] clocksource: Switched to clocksource hpet
[    0.233374] VFS: Disk quotas dquot_6.6.0
[    0.233418] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.233662] AppArmor: AppArmor Filesystem Enabled
[    0.233775] pnp: PnP ACPI init
[    0.234029] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.234171] pnp 00:01: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.234878] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.234882] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.234886] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.234889] system 00:02: [io  0x4080-0x40ff] has been reserved
[    0.234893] system 00:02: [io  0x4400-0x447f] has been reserved
[    0.234896] system 00:02: [io  0x4480-0x44ff] has been reserved
[    0.234899] system 00:02: [io  0x4800-0x487f] has been reserved
[    0.234903] system 00:02: [io  0x4880-0x48ff] has been reserved
[    0.234907] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.234910] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.234914] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[    0.234923] system 00:02: [mem 0xfefe2000-0xfefe3fff] has been reserved
[    0.234926] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.234930] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.234933] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.234940] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235089] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.235242] system 00:04: [io  0x0250-0x0253] has been reserved
[    0.235246] system 00:04: [io  0x0256-0x025f] has been reserved
[    0.235250] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.235254] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.235260] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235401] system 00:05: [io  0x0260-0x026f] has been reserved
[    0.235407] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235549] system 00:06: [io  0x5000-0x507f] has been reserved
[    0.235553] system 00:06: [io  0x5080-0x50ff] has been reserved
[    0.235558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235726] system 00:07: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.235732] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236201] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.236204] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.236208] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.236211] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.236215] system 00:08: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.236221] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.237671] pnp: PnP ACPI: found 9 devices
[    0.246567] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.246643] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.246658] pci 0000:00:10.0: PCI bridge to [bus 02]
[    0.246662] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.246668] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.246673] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.246680] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.246686] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.246698] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.246719] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.246731] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.246754] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.246757] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.246760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246763] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.246766] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfbffffff window]
[    0.246769] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.246772] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.246775] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.246778] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246781] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.246784] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xfbffffff window]
[    0.246787] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.246790] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.246793] pci_bus 0000:02: resource 1 [mem 0xfaf00000-0xfbffffff]
[    0.246795] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.246798] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.246801] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.246804] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.246985] NET: Registered protocol family 2
[    0.247335] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.247505] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.247707] TCP: Hash tables configured (established 32768 bind 32768)
[    0.247795] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.247833] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.247994] NET: Registered protocol family 1
[    0.248578] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.308515] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.308741] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.308752] PCI: CLS 64 bytes, default 64
[    0.308859] Unpacking initramfs...
[    1.836813] Freeing initrd memory: 43388K
[    1.837194] Scanning for low memory corruption every 60 seconds
[    1.837853] audit: initializing netlink subsys (disabled)
[    1.837978] audit: type=2000 audit(1579805800.836:1): initialized
[    1.838666] Initialise system trusted keyrings
[    1.838825] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.842937] zbud: loaded
[    1.844057] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.844562] fuse init (API version 7.26)
[    1.847062] Key type asymmetric registered
[    1.847066] Asymmetric key parser 'x509' registered
[    1.847167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.847226] io scheduler noop registered
[    1.847228] io scheduler deadline registered
[    1.847247] io scheduler cfq registered (default)
[    1.847953] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 21
[    1.848521] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 20
[    1.848798] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.848799] vesafb: scrolling: redraw
[    1.848802] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.848825] vesafb: framebuffer at 0xf9000000, mapped to 0xffffbf0000c00000, using 1216k, total 1216k
[    1.849015] Console: switching to colour frame buffer device 80x30
[    1.849039] fb0: VESA VGA frame buffer device
[    1.849069] intel_idle: does not run on family 6 model 23
[    1.849268] ACPI: AC Adapter [AC0] (off-line)
[    1.849453] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.849458] ACPI: Power Button [PWRB]
[    1.849544] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.849554] ACPI: Sleep Button [SLPB]
[    1.850941] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.850948] ACPI: Lid Switch [LID]
[    1.851037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.851040] ACPI: Power Button [PWRF]
[    1.851891] Monitor-Mwait will be used to enter C-1 state
[    1.851907] Monitor-Mwait will be used to enter C-2 state
[    1.851921] Monitor-Mwait will be used to enter C-3 state
[    1.851932] tsc: Marking TSC unstable due to TSC halts in idle
[    1.854894] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.855346] thermal LNXTHERM:00: registered as thermal_zone0
[    1.855349] ACPI: Thermal Zone [THRM] (36 C)
[    1.855671] GHES: HEST is not enabled!
[    1.856110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.860588] Linux agpgart interface v0.103
[    1.864662] loop: module loaded
[    1.865104] libphy: Fixed MDIO Bus: probed
[    1.865106] tun: Universal TUN/TAP device driver, 1.6
[    1.865108] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.865235] PPP generic driver version 2.4.2
[    1.865336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.865342] ehci-pci: EHCI PCI platform driver
[    1.865591] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.865603] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.865617] ehci-pci 0000:00:04.1: debug port 1
[    1.865672] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.865699] ehci-pci 0000:00:04.1: irq 22, io mem 0xfae7ec00
[    1.875463] random: fast init done
[    1.880038] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.880150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.880154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.880157] usb usb1: Product: EHCI Host Controller
[    1.880160] usb usb1: Manufacturer: Linux 4.10.0-38-generic ehci_hcd
[    1.880162] usb usb1: SerialNumber: 0000:00:04.1
[    1.880430] hub 1-0:1.0: USB hub found
[    1.880446] hub 1-0:1.0: 8 ports detected
[    1.883175] ehci-platform: EHCI generic platform driver
[    1.883210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.883218] ohci-pci: OHCI PCI platform driver
[    1.883393] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.883403] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.883443] ohci-pci 0000:00:04.0: irq 23, io mem 0xfae7f000
[    1.890496] ACPI: Battery Slot [BAT0] (battery present)
[    1.942092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.942096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.942099] usb usb2: Product: OHCI PCI host controller
[    1.942102] usb usb2: Manufacturer: Linux 4.10.0-38-generic ohci_hcd
[    1.942105] usb usb2: SerialNumber: 0000:00:04.0
[    1.942374] hub 2-0:1.0: USB hub found
[    1.942388] hub 2-0:1.0: 8 ports detected
[    1.945092] ohci-platform: OHCI generic platform driver
[    1.945119] uhci_hcd: USB Universal Host Controller Interface driver
[    1.945262] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.948793] i8042: Detected active multiplexing controller, rev 1.1
[    1.951212] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.951221] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.951297] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.951363] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.951428] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.951751] mousedev: PS/2 mouse device common for all mice
[    1.952292] rtc_cmos 00:03: RTC can wake from S4
[    1.952629] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.952685] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.952700] i2c /dev entries driver
[    1.952826] device-mapper: uevent: version 1.0.3
[    1.953037] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.953093] ledtrig-cpu: registered to indicate activity on CPUs
[    1.953728] NET: Registered protocol family 10
[    1.962355] Segment Routing with IPv6
[    1.962395] NET: Registered protocol family 17
[    1.962416] Key type dns_resolver registered
[    1.962864] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[    1.962959] microcode: Microcode Update Driver: v2.2.
[    1.963278] registered taskstats version 1
[    1.963299] Loading compiled-in X.509 certificates
[    1.969435] Loaded X.509 cert 'Build time autogenerated kernel key: 0e953fd717aa51b8d9e0128dd1af1f8370b86949'
[    1.969482] zswap: loaded using pool lzo/zbud
[    1.973702] Key type big_key registered
[    1.973709] Key type trusted registered
[    1.977593] Key type encrypted registered
[    1.977600] AppArmor: AppArmor sha1 policy hashing enabled
[    1.977605] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.977657] evm: HMAC attrs: 0x1
[    1.978061]   Magic number: 4:498:949
[    1.978087] mdio_bus fixed-0: hash matches
[    1.978138] tty tty6: hash matches
[    1.978213] memory memory2: hash matches
[    1.978331] rtc_cmos 00:03: setting system clock to 2020-01-23 18:56:41 UTC (1579805801)
[    1.979626] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.979627] EDD information not available.
[    1.979676] PM: Hibernation image not present or could not be loaded.
[    1.983042] Freeing unused kernel memory: 2228K
[    1.983045] Write protecting the kernel read-only data: 14336k
[    1.984324] Freeing unused kernel memory: 1156K
[    1.985367] Freeing unused kernel memory: 268K
[    1.996330] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.996563] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.092305] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    2.095415] wmi: Mapper loaded
[    2.105902] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.119719] ahci 0000:00:0b.0: version 3.0
[    2.119995] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 5
[    2.120117] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    2.120227] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.120230] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[    2.120789] scsi host0: ahci
[    2.120968] scsi host1: ahci
[    2.121041] ata1: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c100 irq 24
[    2.121043] ata2: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c180 irq 24
[    2.129448] [drm] Initialized
[    2.129611] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.129633] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.129925] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    2.130352] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffbf0000671000, 90:e6:ba:1f:ed:67, XID 18000000 IRQ 25
[    2.130354] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    2.175397] acpi device:23: registered as cooling_device2
[    2.180327] acpi device:24: registered as cooling_device3
[    2.180428] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:00/input/input9
[    2.201593] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.216378] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.218556] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[    2.218646] checking generic (f9000000 130000) vs hw (e0000000 10000000)
[    2.218647] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[    2.218648] fb: switching to nouveaufb from VESA VGA
[    2.218684] Console: switching to colour dummy device 80x25
[    2.218914] nouveau 0000:02:00.0: NVIDIA MCP79/MCP7A (0ac980b1)
[    2.234300] nouveau 0000:02:00.0: bios: version 62.79.71.00.01
[    2.255574] nouveau 0000:02:00.0: fb: 512 MiB stolen system memory
[    2.311676] [TTM] Zone  kernel: Available graphics memory: 1538964 kiB
[    2.311677] [TTM] Initializing pool allocator
[    2.311684] [TTM] Initializing DMA pool allocator
[    2.311706] nouveau 0000:02:00.0: DRM: VRAM: 512 MiB
[    2.311707] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[    2.311712] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[    2.311714] nouveau 0000:02:00.0: DRM: DCB version 4.0
[    2.311716] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000323 00010034
[    2.311719] nouveau 0000:02:00.0: DRM: DCB outp 01: 02011300 0000001e
[    2.311721] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[    2.311723] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[    2.316351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.316352] [drm] Driver supports precise vblank timestamp query.
[    2.316457] nouveau 0000:02:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.327150] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[    2.373906] nouveau 0000:02:00.0: DRM: allocated 1366x768 fb: 0x50000, bo ffff9a9375392800
[    2.376564] fbcon: nouveaufb (fb0) is primary device
[    2.376735] Console: switching to colour frame buffer device 170x48
[    2.376770] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[    2.408052] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[    2.408224] usb 1-5: New USB device found, idVendor=04f2, idProduct=b071
[    2.408226] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.408228] usb 1-5: Product: CNF7129
[    2.408230] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
[    2.408231] usb 1-5: SerialNumber: SN0001
[    2.436962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.436982] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.439503] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LC01, max UDMA/100
[    2.442501] ata2.00: configured for UDMA/100
[    2.445177] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[    2.445179] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.446558] ata1.00: configured for UDMA/133
[    2.446807] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 C40C PQ: 0 ANSI: 5
[    2.476282] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.476446] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.476465] sd 0:0:0:0: [sda] Write Protect is off
[    2.476467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.476493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.478535] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LC01 PQ: 0 ANSI: 5
[    2.503743] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.503745] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.503950] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.504335] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.574659]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.575368] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.848043] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e44ef57dfe, max_idle_ns: 440795250155 ns
[    3.106302] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    3.146790] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    3.186820] psmouse serio4: elantech: Elan sample query result 19, 00, 00
[    3.324539] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[    4.192028] raid6: sse2x1   gen()  3226 MB/s
[    4.240014] raid6: sse2x1   xor()  3444 MB/s
[    4.288022] raid6: sse2x2   gen()  4039 MB/s
[    4.336015] raid6: sse2x2   xor()  4195 MB/s
[    4.384009] raid6: sse2x4   gen()  5970 MB/s
[    4.432012] raid6: sse2x4   xor()  4766 MB/s
[    4.432014] raid6: using algorithm sse2x4 gen() 5970 MB/s
[    4.432015] raid6: .... xor() 4766 MB/s, rmw enabled
[    4.432016] raid6: using ssse3x2 recovery algorithm
[    4.433798] xor: measuring software checksum speed
[    4.472012]    prefetch64-sse:  8652.000 MB/sec
[    4.512009]    generic_sse:  7642.000 MB/sec
[    4.512010] xor: using function: prefetch64-sse (8652.000 MB/sec)
[    4.534165] Btrfs loaded, crc32c=crc32c-generic
[    5.034745] random: crng init done
[    6.417194] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    7.558021] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    7.558188] systemd[1]: Detected architecture x86-64.
[    7.563739] systemd[1]: Set hostname to <sturcz-K50IN>.
[    9.501930] systemd[1]: Listening on Journal Audit Socket.
[    9.502050] systemd[1]: Listening on LVM2 metadata daemon socket.
[    9.502108] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.502139] systemd[1]: Reached target Remote File Systems (Pre).
[    9.502305] systemd[1]: Created slice System Slice.
[    9.502377] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.502400] systemd[1]: Reached target Encrypted Volumes.
[   10.294901] lp: driver loaded but no devices found
[   10.325763] ppdev: user-space parallel port driver
[   20.263878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[   20.284244] systemd-journald[325]: Received request to flush runtime journal from PID 1
[   20.455075] asus_laptop: Asus Laptop Support version 0.42
[   20.455219] asus_laptop: BSTS called, 0xb700 returned
[   20.455233] asus_laptop:   K50IN model detected
[   20.459666] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input15
[   20.531059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.536589] i2c i2c-7: nForce2 SMBus adapter at 0x4d00
[   20.536598] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20160930/utaddress-247)
[   20.536605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.671104] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   20.671117] snd_hda_intel 0000:00:08.0: Disabling MSI
[   20.869640] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[   20.916709] ath: phy0: Enable LNA combining
[   20.922448] intel_powerclamp: No package C-state available
[   20.923921] ath: EEPROM regdomain: 0x60
[   20.923924] ath: EEPROM indicates we should expect a direct regpair map
[   20.923927] ath: Country alpha2 being used: 00
[   20.923928] ath: Regpair used: 0x60
[   20.958507] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.959713] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbf0000d70000, irq=18
[   21.083311] media: Linux media interface: v0.10
[   21.091864] Linux video capture interface: v2.00
[   21.155388] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   21.181719] uvcvideo 1-5:1.0: Entity type for entity Extension 5 was not initialized!
[   21.181724] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   21.181726] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[   21.181728] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   21.181867] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input16
[   21.182396] usbcore: registered new interface driver uvcvideo
[   21.182398] USB Video Class driver (1.1.1)
[   21.345372] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   21.656086] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   21.656091] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   21.656095] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   21.656097] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   21.656100] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   21.656104] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   21.656107] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   22.508230] Adding 3143676k swap on /dev/sda5.  Priority:-1 extents:1 across:3143676k FS
[   22.537607] audit: type=1400 audit(1579805822.056:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=702 comm="apparmor_parser"
[   22.537612] audit: type=1400 audit(1579805822.056:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
[   22.537614] audit: type=1400 audit(1579805822.056:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=702 comm="apparmor_parser"
[   22.537615] audit: type=1400 audit(1579805822.056:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
[   22.540077] audit: type=1400 audit(1579805822.056:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
[   22.542771] audit: type=1400 audit(1579805822.060:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=704 comm="apparmor_parser"
[   22.542775] audit: type=1400 audit(1579805822.060:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=704 comm="apparmor_parser"
[   22.542776] audit: type=1400 audit(1579805822.060:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=704 comm="apparmor_parser"
[   22.542777] audit: type=1400 audit(1579805822.060:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=704 comm="apparmor_parser"
[   22.542779] audit: type=1400 audit(1579805822.060:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=704 comm="apparmor_parser"
[   22.794191] cgroup: new mount options do not match the existing superblock, will be ignored
[   23.177639] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   23.177738] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
[   26.668215] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   26.681833] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   26.690113] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.701380] r8169 0000:03:00.0 enp3s0: link down
[   26.701442] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.899962] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   29.046796] wlp4s0: authenticate with c0:9f:e1:91:2c:aa
[   29.064177] wlp4s0: send auth to c0:9f:e1:91:2c:aa (try 1/3)
[   29.067690] wlp4s0: authenticated
[   29.068095] wlp4s0: associate with c0:9f:e1:91:2c:aa (try 1/3)
[   29.075854] wlp4s0: RX AssocResp from c0:9f:e1:91:2c:aa (capab=0x1411 status=0 aid=1)
[   29.075983] wlp4s0: associated
[   29.076085] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   29.079693] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by c0:9f:e1:91:2c:aa
sturcz@sturcz-K50IN ~ $ ^C
sturcz@sturcz-K50IN ~ $ c                                                                                                                                               
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                       

Értékelés: 

0
Még nincs értékelve

Szerintem...

Szerintem ennek a gépnek túl nagy falat a KDE. Esetleg a Cinnamon-t ki lehet próbálni, de lehet, annak is kevés a 512MB VRAM.

Azt lehet tudni, hogy a 3 GB RAM miből áll? Talán egy 1 Gb meg egy 2 GB modul?

Értékelés: 

0
Még nincs értékelve

Szerintem...

#5 Nem hinném, amúgy a KDE kimondottan erőforrásbarát, nálam egy nudli Atom procin teljesen gürdülékeny, megkckáztatom hogy a XFCE-nél is gördülékenyebb. (volt, mert a legutóbbi rendszerfrissítés valamit elbaltázott, másik témában írtam erről).

Viszont az energiagazdálkodása az csapnivaló, nálam is.
Mióta használom, több mint 1 éve, a monitor off funkció az egy szerencsejátékra emlékeztet, sose tudom kitalálni hogy a beállított 10 perc múlva kikapcsolja a monitort vagy nem.
Ezt komolyan mndom, 3 verzió van:
1. 10 perc után rendesen lelövi a monitort (10-ből kb. 5x)
2. Nem lövi le, soha, félóra múlva sem (10-ből kb. 2x)
3. Valahol a kettő között megáll félúton a folyamat, 
az eredmény bekapcsolva maradt monitor, fekete képpel, a közepén az egérkurzor (10-ből kb. 3x)

Vagyis valami bibi van az energia managementtel, hogy ez kde bug vagy csak én szívok ezzel a gépemen, erre nem tudok válaszolni.

Sturcz Sándornak,
a hiba jelentkezésekor egy escape vagy enter nyomásra mit csinál, ha szerencséd van akkor visszajön az asztal, vagy egy bejelentkező képernyő.
Valamint meg kéne nézni a beállításokan hogy a monitor off, vagy a képernyővédő bekapcsolása UTÁN nincs-e beállítva a munkamenet felfüggesztése is. Ha igen, akkor azt próbaképp ki kéne kapcsolni.
Vagy teljesen kikapcsolni mindent, ahogyan a linken mutatom:

https://mega.nz/#!g85BAKLL!mRkOb0KCLWxqpmwkZR6Vrj6MRvxGXgE1QKcnjyrVJdc

 

Értékelés: 

0
Még nincs értékelve
kimarite képe

Képernyőkímélő rendellenes müködése

#2 A pastebin egy oldal: https://paste.ubuntu.com/
Hosszú szöveges kimenetek megosztására szolgál. Bemásolod a kimenetet, fent begépeled a felhasználóneved, mentesz, majd a mentés után megjelenő URL-t ide, az oldalra bemásolod. Akkor csak egy URL-t látunk, és megnyitjuk. Mindjárt nézem, amit ... bemásoltál ide.

Értékelés: 

0
Még nincs értékelve
kimarite képe

Szerintem...

#6 a munkamenet felfüggesztése is.

Energiakezelés, Képernyővédő. Lehet, más a nevük .. .
A felfüggesztést ki kéne kapcsolni, azzal van gond valami okból. Meg kéne nézni, milyen lehetőségek vannak helyette, és a lehetőségeket ide begépelni. Többször is előfordul ez a jelzés:

pci 0000:00:08.0: System wakeup disabled by ACPI

Értékelés: 

0
Még nincs értékelve
Sturcz Sándor képe

Lénux Mint 18.3 KDE képernyőlímélő rendellenesen müködik

1 darab 1 GB, 1 darab 2GB RAM

1 perc halványítás 2 perc lekapcsolás volt beállítva. Átállítottam 4 és 5 percre, dekikapcsolását sehol nem találtam. Escape és enter nem segít.

pci 0000:00:08.0: System wakeup disabled by ACPI Ezen dolgozom

Mindenkinek köszönet

Értékelés: 

0
Még nincs értékelve

Két dolgot szeretnék kérni:

Két dolgot szeretnék kérni:

1. Lehessen az oldal aljára ugrani a kép tetejéről, mert tableten igencsak kellemetlen végigmenni az ilyen nagyméretű beillesztéseknél (a fordított ugrás szintén kívánatos).

2. Sok hozzászólásnál több képernyőre oszlik a kommentfolyam. Miért nincs a lap tetején oldalválasztó lehetőség, miért csak alul? Ilyenkor is sokat kell legörgetni, ha választani akarunk.

Mindezek programozói feladatok. Ha máshol ezeket meg tudták oldani, itt miért nem?

Más: sokszor előfordul, hogy ha valaki hozzászól, az új bejegyzés nem alulra kerül, hanem valahová középre. Kezdődhet a vadászat, hogy vajon hol van (dátum alapján). Erre is kellene megoldás.

Értékelés: 

0
Még nincs értékelve
kimarite képe

Két dolgot szeretnék kérni:

#10 Két dolgot szeretnék kérni:
Nem itt van a helye a kéréseknek, jelzéseknek ..., nyilván válaszolok ide is, csak jelzem mindezt.

1. Lehessen az oldal aljára ugrani a kép tetejéről, mert tableten igencsak kellemetlen végigmenni az ilyen nagyméretű beillesztéseknél (a fordított ugrás szintén kívánatos).
Erről beszéltünk már, a megoldás a PageUP és PageDown billentyűk használata. Ha szerinted nincs megoldás, nyiss a témakörre topikot, és megoldjuk.

2. Sok hozzászólásnál több képernyőre oszlik a kommentfolyam. Miért nincs a lap tetején oldalválasztó lehetőség, miért csak alul? Ilyenkor is sokat kell legörgetni, ha választani akarunk.
Erről is beszéltünk már. Nem várható szerintem a közeljövőben. A megjelenés tekintetében én nem tartom jónak, de a nehogy azt hidd, rajtam múlik. Régebben is volt erről szó, szerintem többen nem támogatták. Vannak olyan weboldalak, ahol alul lehet lépkedni a lapok között, vannak olyanok, ahol csak felül, és vannak olyanok, ahol mindkét helyen. Mi „ilyenek” vagyunk. Amúgy a több oldalas nézet Drupal jellegzetesség. Ha nem ez lenne, akkor végtelen görgethetnél. :-)

Mindezek programozói feladatok. Ha máshol ezeket meg tudták oldani, itt miért nem?
Máshol sem „oldották meg”, lásd az előző válaszom és az utolsó válaszom.

Más: sokszor előfordul, hogy ha valaki hozzászól, az új bejegyzés nem alulra kerül, hanem valahová középre. Kezdődhet a vadászat, hogy vajon hol van (dátum alapján). Erre is kellene megoldás.
Tudomásom szerint van olyan fórum, ahol létezik beállítás erre, amit így hívnak: Hozzászólás-megjelenítési lehetőségek. Ismerem azt a fórumot, és emlékszem arra, hogy viszonylag hosszú időbe telt a változtatás. Vadászat nincsen, a böngésződdel van gond (ezt már kiveséztük régebben) :-), nálam, és mindenkinél rajtad kívül a friss hozzászólásnál nyílik meg a fórum. Továbbgondolva az ötleted, hogy lapozni lehessen a friss hozzászólások között (de nem ezt jelezted!), nehéz feladatnak gondolom. „Középre” azért kerülnek egyes hozzászólások, mert leágazó a megjelenés, adott hozzászólás felett van az a másik, előzőt követő hozzászólás, amire az utóbbi fórumtag válaszolt ... ez eléggé logikus és követhető. Ha az oldal alján lenne a mindig utolsó válasz vagy válaszok, akkor nehezebb visszakövetni, mire válaszolt éppen a fórumtárs. Ha mindezt vizuálisan elképzeled, igazat adsz nekem. Igazán kidolgozhattál volna valami megoldást a tabletedre ...., de nézd, én sokszor úton vagyok, és okostelefonon nézem a fórumot (válaszolok is), és nem „nyavajgok”. Mondhatni, ez van, ezt kell szeretni. Ez a lehetőség.

Összefoglalva, Drupal motor hajtja az oldalt (mint mellékes információt említem meg, mert minden weboldal motornak van előnye és hátránya), mely nyelvnek jellegzetességei, azaz, van, amit egyszerű beállítani és van, amit nem. Volt egy elképzelés az „elején”, hogy miképpen nézzen ki a weboldalunk, hosszas tervezés volt, szép legyen, továbbá, a lehetőségekhez képest kihozzuk a maximumot, a tudásból a lehető legtöbbet, szövegszerkesztő megoldás is kerekedett (ne kelljen kódokat begépelni a karaktereknél), amit aztán még jobbá tettünk (beágyazott szövegszerkesztő), további javításokat tettünk (a részleteket közzétettük, megtalálod), időszakonként frissítjük a Drupalt, stb.. A programozó munka az oké, de idő és energia kell hozzá, és a kérés a szépítés, illetve saját ötletként a használat könnyítése. Azt gondolom, hogy a nagy erőket befektetve gondozzuk a weboldal megjelenését, és feltétlen a biztonságosságát. Ettől függetlenül lehetséges, hogy egyszer majd meg tudjuk valósítani a kért dolgokat is. Kivéve azt ugye, hogy a te böngésződ nem a friss hozzászóláshoz lép, hanem „valahova máshova”, ezzel nem tudunk mit kezdeni, de a megoldásban segíthetünk (kérdezted már, de nem tudtunk ebben segíteni, próbálj még egyszer kérdezni, topikot nyitni). Utószóként megjegyzem, hogy a fórum használata nem nehézkes, és amire van (Hírek, Fórum) tökéletes ... és utóbbi igazán a cél, nem az, hogy minden szempontból tökéletes legyen. De van, akinek ez, van akinek amaz tetszik, mindenki igényeit lehetetlen kielégíteni, ezért nem is lehet cél.
Megkérlek arra, hogy ezt a szálat itt ne folytasd. Van erre topik. Másrészt most éppen ugyanazt csinálod, mint amit te kifogásolsz: azaz, aki ezt a témát nézi, ez érdekli, teljesen eltérő témában olvasásra, lapozásra kényszeríted. Kérlek, a megfelelő helyen és témában próbálj valamihez hozzászólni. Nincs harag :-), csak tényleg ..., igyekezzünk normálisan fórumozni, mindennek helye van.

Értékelés: 

0
Még nincs értékelve
kimarite képe

Linux Mint 18.3 KDE képernyőkímélő rendellenesen müködik

#9 1 perc halványítás 2 perc lekapcsolás volt beállítva. Átállítottam 4 és 5 percre, dekikapcsolását sehol nem találtam. Escape és enter nem segít.

Mutatnál képet erről? Imgur vagy ImgBB képmegosztó oldalak valamelyikének segítségével. Tibi használ KDE-t, mi nem. És tán Tibi ..., de ő közölt képet is:
https://mega.nz/#!g85BAKLL!mRkOb0KCLWxqpmwkZR6Vrj6MRvxGXgE1QKcnjyrVJdc
Kikapcsolás: megfelelésjelet (pipa) kell kivenni a képen látható beállításoknál, értelemszerűen.
Kép alapján esetleg megpróbálod?

Értékelés: 

0
Még nincs értékelve
Sturcz Sándor képe

Linux Mint 18.3 KDE képernyőkímélő rendellenesen müködik

#12 Kedves Kimarite!

Igazad volt. Képernyő kikapcsolása megoldotta a problémát.

Nagyon szépen köszönöm a munkádat.

Tisztelettel Sturcz Sándor

Értékelés: 

0
Még nincs értékelve
kimarite képe

Linux Mint 18.3 KDE képernyőkímélő rendellenesen müködik

#9 Visszatérek a System wakeup disabled jelzésre, ami után egy-egy eszköz szerepel.

Mi a kimenet?

cat /proc/acpi/wakeup

-----

A BIOS-ban van-e olyan beállítás, ahol az ACPI, ASPM kifejezések szerepelnek. Ha igen, mire van most állítva, és milyen beállítási lehetőségeket látsz?

https://askubuntu.com/questions/152403/how-do-i-make-changes-to-proc-acp...

-----

A menüszerkesztőben megnéznéd, mi a képernyővédő indító parancsa?

-----

Asus K50IN típusú laptopon fenti verzió 2percen belül, ha nincs mozgatva a kurzor elsötétül a képernyő és ujabb mozgatásra csak a kurzort jelenití meg, amely mogatására sem jelenik meg a képernyő

Ilyenkor pontosan mit csinálsz? Én azt látom, kikapcsolod a rendszert (gépet), majd újraindítod.

-----

Esetleg túl van húzva a gép?
Hasonló: https://rog.asus.com/forum/showthread.php?112345-ASUS-TUF-B450M-PLUS-Ryz...

-----

Ez is lehet ok ...

nouveau 0000:02:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

A shutdown működik?

https://forums.gentoo.org/viewtopic-p-8107818.html

Értékelés: 

0
Még nincs értékelve
kimarite képe

Linux Mint 18.3 KDE képernyőkímélő rendellenesen müködik

#13 Előbbi hozzászólásom tulajdonképpen tárgytalan. Ha megoldva.

Szívesen, és teljen sok örömöd a Linux Mint használatában!

444tibi, kimarite

Értékelés: 

0
Még nincs értékelve